AXESS AXLOC-NIS1 Manual

AXESS Ikke kategoriseret AXLOC-NIS1

Læs gratis den danske manual til AXESS AXLOC-NIS1 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om AXESS AXLOC-NIS1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

AXLOC-NIS1

I N S TA L L AT I O N I N S T R U C T I O N S

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections, especially the air

bag indicator lights, are plugged in before

reconnecting the battery or cycling the

ignition to test this product.

NOTE: Refer also to the instructions included

with the aftermarket accessory before

installing this device.

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink

• Tape • Wire cutter • Zip-ties

TABLE OF CONTENTS

Applications.............................................................1

Installation ............................................................. 2

Diagram .................................................................. 3

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date vehicle speciﬁc applications

• Designed to provide (2) channels of low-level audio output from the factory system.

• Allows for the installation of an ampliﬁer for speakers or subwoofers.

• Gain Controller included to adjust the overall output.

• 12v-500mA remote wire activated with signal sense.

• 55-watts per channel

• Designed for non-ampliﬁed vehicles.

Note: A single pole double throw (SPDT) relay is recommended when installing multiple ampliﬁers.

KIT COMPONENTS

• AXLOC-NIS1 Wiring Harness

• Gain Controller

• 12v-500mA Remote Wire

• Auxiliary Cable

For dash disassembly instructions, refer to . Enter the year, make, and model of the vehicle in the for .metraonline.com Vehicle Fit Guide Radio Install Kits

Nissan LOC (Line Output Converter)

AXLOC-NIS1

(for Non-Ampliﬁed Vehicles)

2007-Up

Nissan

370Z 2009-Up

Altima 2007-Up

Cube 2009-2014

Frontier 2008-Up

Juke 2011-2017

Kicks 2018-Up

Leaf 2012-Up