AXLOC-TY1
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2022 METRA ELECTRONICS CORPORATION REV. 12/15/22 INSTAXLOC-TY1
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal
before installing this product. Ensure that all
installation connections, especially the air
bag indicator lights, are plugged in before
reconnecting the battery or cycling the
ignition to test this product.
NOTE: Refer also to the instructions included
with the aftermarket accessory before
installing this device.
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink
• Tape • Wire cutter • Zip-ties
TABLE OF CONTENTS
Applications.............................................................1
Installation ............................................................. 2
Diagram .................................................................. 3
APPLICATIONS
TOYOTA
4Runner 1987-2019
86 2017-2020
Avalon 1995-2018
C-HR 2018-2018
Solara 1999-2008
Camry 1987-2017
Celica 1989-2005
Corolla 1987-2019
Cressida 1987-1992
Echo 2000-2005
FJ Cruiser 2007-2014
Highlander 2001-2019
Land Cruiser 1988-1993
Matrix 2005-2013
MR2 1987-1995
MR2 Spyder 2000-2005
Paseo 1992-1997
Pickup 1987-1995
Previa 1991-2997
Prius 2001-2019
Prius C 2012-2019
Prius Prime 2017-2020
Prius V 2012-2017
RAV4 1996-2018
Sequoia 2001-2019
Sienna 1996-2017
Solara 1999-2008
Supra 1986-1992
T-100 1993-1998
Tacoma 1995-2019
Tundra 2000-2019
Van 1987-1990
Venza 2009-2015
Yaris 2007-2018
KIT COMPONENTS
• AXLOC-TY1 Wiring Harness
• Gain Controller
• 12v-500mA Remote Wire
• Auxiliary Cable
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications.
• Designed to provide (2) channels of low-level audio output from the factory system.
• Allows for the installation of an amplifier for speakers or subwoofers.
• Gain Controller included to adjust the overall output.
• 12v-500mA remote wire activated with signal sense.
• 55-watts per channel.
• Designed for non-amplified vehicles.
Note: A single pole double throw (SPDT) relay is recommended when installing multiple amplifiers.
Toyota LOC (Line Output Converter)
AXLOC-TY1 (for Non-Amplified Vehicles) 1987-2020
For dash disassembly instructions, refer to metraonline.com. Enter the year, make, and model of the vehicle in the for .Vehicle Fit Guide Radio Install Kits
