AXESS AXLOC4M-80 Manual

AXESS Ikke kategoriseret AXLOC4M-80

Læs gratis den danske manual til AXESS AXLOC4M-80 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om AXESS AXLOC4M-80, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

AXLOC4M-80

INSTALL ATION INSTR UCTIONS

REV. 4/28/20

Integrate • AxxessInterfaces.com

The Line Output Converter (LOC) should be installed on a stereo’s speaker output

wires or the output wires on an OEM ampliﬁer of up to 80 watts per channel.

These wires can be found behind the stereo in the dash, on the outside of an OEM

ampliﬁer, or on the input terminals on the OEM speakers.

Wire color and function

The audio input wire colors are an EIA standard for car stereo applications as follows:

Note: Be sure that all audio input connections are polarized or in phase with each

other. That is, the positive output wires from the audio source need to be connected

to the corresponding positive input wires of the LOC. The same goes for the negative

audio wires. Failure to do this will result in poor bass response and low quality audio.

(Continued on other side)

Input harness

White Left front (+) input

White/Black Left front (-) input

Gray Right front + input

Gray/Black Right front (-) input

Green Left rear (+) input

Green/Black Left rear (-) input

Purple Right rear (+) input

Purple/Black Right rear (-) input

Power harness

Yellow Battery +12v input

Black Power (-) ground input

Blue Remote +12v output

Brown Reference ground (-)

AXLOC4M-80

INSTALL ATION INSTR UCTIONS

REV. 4/28/20

Integrate • AxxessInterfaces.com

The LOC is designed to convert (4) channels of speaker level audio into (4) channels

of line level audio. This allows for the installation of line level products such as

ampliﬁers, EQs and crossovers on systems that do not have RCA line level outputs.

In addition this device will also detect the presence of an audio signal and then

generate a +12V output that can be used to turn-on an aftermarket ampliﬁer.

Features

80 watts maximum input

Input circuit corrects

Crossover distortion commonly found on other brands of LOCs

6:1 Step down with variable output

Gold ﬂashed RCAs

Attractive and durable enclosure

Note: The LOC will shut off 60 seconds after no signal detected.

Produkt Specifikationer

Mærke:	AXESS
Kategori:	Ikke kategoriseret
Model:	AXLOC4M-80

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXLOC4M-80 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret AXESS Manualer

AXESS AXABH-FD1 Manual

30 Juli 2025

AXESS AXABH-TY3 Manual

30 Juli 2025

AXESS AXBUCH-MZ6V Manual

29 Juli 2025

AXESS AXABH-CH3 Manual

29 Juli 2025

AXESS AXDSPX-HK5 Manual

25 Februar 2025

AXESS AXAMP-CH8 Manual

25 Februar 2025

AXESS AXTC-MZ1 Manual

25 Februar 2025

AXESS AXBUCH-TYCAM26V Manual

25 Februar 2025

AXESS AXAMP-FD2 Manual

25 Februar 2025

AXESS AXBUCH-TYCAM36V Manual

25 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman AUTO300 WIFI Manual

1 August 2025

Navman AUTO550 DUAL Manual

1 August 2025

Newline DV-15023H Manual

1 August 2025

Navman MiVue 720 Manual

1 August 2025

Etna HF2008 Manual

1 August 2025

Grundig 40 VLE 7630 WP Manual

1 August 2025

Navman MiVue 600 DC Manual

1 August 2025

Navman MiVue 830DC Manual

1 August 2025

Navman MiVue 840 Manual

1 August 2025

Navman MiVue 880 DC Manual

1 August 2025