AXESS AXSUB-GM1 Manual


Læs gratis den danske manual til AXESS AXSUB-GM1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 58 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 29.5 anmeldelser. Har du et spørgsmål om AXESS AXSUB-GM1, eller vil du spørge andre brugere om produktet?

Side 1/4
I N S TA L L AT I O N I N S T R U C T I O N S
AXSUB-GM1
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 3/5/24 AXSUB-GM1
• AXSUB-GM1 interface
• AXDSPX-GM1 vehicle T-harness (LD-GM50SUB)
• Bass knob (LD-BASSKNOB)
NOTE: SELECT VEHICLES EQUIPPED WITH RPO: IO3, IO5 OR IO6
INTERFACE FEATURES
GM (Add a SUB) Interface
2013-2020
Visit AxxessInterfaces.com for more detailed informaon
about the product and up-to-date vehicle specic applicaons
INTERFACE COMPONENTS
Can be used in amplified and non-amplified models
• Easy behind the radio installation with pre-wired harness
• Bass knob included for level control of subwoofer amp
• Micro-B USB updatable
www.AxxessInterfaces.com
www.MetraOnline.com
MetraOnline.com may be used to assist with
dash assembly instructions. Simply enter your
Year, Make, Model vehicle into the vehicle fit
guide and look for the Dash Kit Installation
Instructions.
If the vehicle is equipped with Active noise
cancelation (ANC) microphones, they will
need to be bypassed. Please refer to www.
Axxessinterfaces.com for ANC bypass
harnesses offered for select
vehicles.
TOOLS REQUIRED
TABLE OF CONTENTS
Connections.................................................................2
Programming..............................................................3
Testing..........................................................................3
Specifications...............................................................3
Troubleshooting..........................................................4
ATTENTION: With the key out of the ignition,
disconnect the negative battery terminal before
installing this product. nsure that all installation
connections, especially the air bag indicator
lights, are plugged in before reconnecting
the battery or cycling the ignition to test this
product.
NOTE: Refer also to the instructions included
with the aftermarket radio.
Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
Zip ties • Multimeter
2
CONNECTIONS
NOTE: SELECT VEHICLES EQUIPPED WITH RPO: IO3, IO5 OR IO6


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: AXSUB-GM1

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXSUB-GM1 stil et spørgsmål nedenfor, og andre brugere vil svare dig