AXESS AXSWC Manual

AXESS Ikke kategoriseret AXSWC

Læs gratis den danske manual til AXESS AXSWC (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 19 anmeldelser. Har du et spørgsmål om AXESS AXSWC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

AXSWC GENERAL INSTRUCTIONS

I N S TA L L A T I O N I N S T R U C T I O N S

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Installation Preparation ........................................2

Installation .............................................................2

Programming .........................................................3

Wire Description ....................................................3

AXSWC General Instructions

• One interface does it all, no

additional interfaces needed

• Designed to be compatible

with all major radio brands

•

Auto detects vehicle type, radio

connection, and preset controls

• Ability to dual assign steering

wheel control buttons

• Can be manually programmed

for most vehicles

• Retains settings even after

battery disconnection or

interface removal

• All connections done at the

radio location

• Micro-B USB updatable

• AXSWC Interface

• AXSWC harness (12-pin harness with male 3.5mm jack)

• 3.5mm adapter

Visit AxxessInterfaces.com for more detailed information about the product and up-to-date

vehicle speciﬁc applications

INSTALLATION PREPARATION INSTALLATION (CONT.)

From axxessinterfaces.com, submit the vehicle information in the box titled Vehicle Fit Guide &

AXSWC Install Instructions GET PARTS, then select . This will take you to a page where you will be

notiﬁed if your vehicle will work or not with the AXSWC interface. If the interface is compatible,

there will be a link under the green bar titled AXSWC **** Wiring Instructions. Click on this link

to open the PDF document for your speciﬁc vehicle. Print this document to have with you in the

vehicle during the installation.

Note: Though we have done extensive research, testing, and verifying that the steering wheel

control wires from the vehicles listed are correct, it is still the Installer’s responsibility to verify

that the steering wheel control wires are truly correct. If a discrepancy is found, please notify our

Tech Department at 386-257-1187, or techsupport@metra-autosound.com.

12-pin harness:

• Connect the wire to chassis ground.Black

• Connect the wire to the accessory power.Red

• Locate the steering wheel control wire(s) in the vehicles harness as noted in the AXSWC

vehicle speciﬁc document. Connect this wire(s) to the AXSWC.

Note: Axxess recommends that the wires are soldered for the best “copper-to copper”

connection. Tapping style connectors are not recommended.

3.5mm jack:

• Follow AXSWCH-PAR (sold separately) instructions.Parrot:

• For the radios listed below: 3.5mm adapterConnect the , to the male 3.5mm SWC jack from

the AXSWC harness. Any remaining wires tape off and disregard.

• Eclipse: Connect the steering wheel control wire, normally Brown Brown/White, to the

wire from the connector. Then connect the remaining steering wheel control wire,

normally , to the wire from the connector.Brown/White Brown

• Metra OE: Connect the steering wheel control Key 1 wire to the wire.(Gray) Brown

• Kenwood or select JVC with a steering wheel control wire: Connect the Blue/Yellow

wire to the wire.Brown

If the Note: Kenwood radio auto detects as a JVC, manually set the radio type to

Kenwood Changing Radio Type. See the instructions under .

• Connect the steering wheel control SWC-2 wire from the radio to the wire.XITE: Brown

• Universal “2 or 3 wire” radio: Connect the steering wheel control wire, referred to as

Key-A or SWC-1, to the Brown wire from the connector. Then connect the remaining

steering wheel control wire, referred to as Key-B or SWC-2, to the Brown/White wire

from the connector. If the radio comes with a third wire for ground, disregard this wire.

Note:

After the interface has been programmed to the vehicle, refer to the manual provided with

the radio for assigning the SWC buttons. Contact the radio manufacturer for more information

• For all other radios: AXSWC harnessConnect the 3.5mm jack from the to the jack on the

radio designated for an external steering wheel control interface. Refer to the aftermarket

radios manual if in doubt as to where the 3.5mm jack goes to.

INSTALLATION

Produkt Specifikationer

Mærke:	AXESS
Kategori:	Ikke kategoriseret
Model:	AXSWC

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXSWC stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret AXESS Manualer

AXESS AXBUCH-MZ6V Manual

29 Juli 2025

AXESS AXABH-CH3 Manual

29 Juli 2025

AXESS AXDSPX-HK5 Manual

25 Februar 2025

AXESS AXAMP-CH8 Manual

25 Februar 2025

AXESS AXTC-MZ1 Manual

25 Februar 2025

AXESS AXBUCH-TYCAM26V Manual

25 Februar 2025

AXESS AXAMP-FD2 Manual

25 Februar 2025

AXESS AXBUCH-TYCAM36V Manual

25 Februar 2025

AXESS AXAMP-TY1 Manual

25 Februar 2025

AXESS AXAMP-TY4 Manual

25 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech MIC-711-OX Manual

30 Juli 2025

Intellinet 713108 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Advantech PCIE-1753 Manual

30 Juli 2025

MXR Rockman X100 Manual

30 Juli 2025

MIPRO MI-909R Manual

30 Juli 2025

Advantech AMAX-4870 Manual

30 Juli 2025

Advantech IDK-1112P-50XGA2 Manual

30 Juli 2025

MIPRO MP-820 Manual

30 Juli 2025

Advantech ARES-12290 Manual

30 Juli 2025