AXESS AXTO-CH2 Manual


Læs gratis den danske manual til AXESS AXTO-CH2 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om AXESS AXTO-CH2, eller vil du spørge andre brugere om produktet?

Side 1/8
AXTO-CH2
I N S TA L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2019 METRA ELECTRONICS CORPORATION REV. 10/10/19 INSTAXTO-CH2
Product Info
INTERFACE FEATURES
INTERFACE COMPONENTS
• AXTO-CH2 interface
• AXTO-CH2 harness
• 16-pin harness
TOOLS REQUIRED
• Cutting tool • Crimping tool • Tape
• Connectors (example: butt-connectors, bell
caps, etc.) • Small flat-blade screwdriver
TABLE OF CONTENTS
Connections ............................................................2
Installation .............................................................3
Programming .........................................................3
Audio level adjustment .........................................3
Chrysler/Dodge Data Interface 2002-2008
APPLICATIONS
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Designed for amplified systems
Provides NAV outputs (parking brake, reverse, speed sense)
Pre-wired AXSWC harness (AXSWC sold separately)
Adjustable gain control for overall volume
High level speaker input
Retains balance and fade
Micro-B USB updatable
CHRYSLER
Pacifica 2004-2008
DODGE
Ram 1500 2002-2004
Ram 2500/3500 2003-2004
2
CONNECTIONS
From the 16-pin harness to the aftermarket radio, connect the:
wire to the accessory wire.Red
Blue/White wire to the amp turn on wire.
wire to the front right positive speaker output.Gray
Gray/Black wire to the front right negative speaker output.
White wire to the front left positive speaker output.
White/Black wire to the front left negative speaker output.
wire to the rear right positive speaker output.Purple
wire to the rear right negative speaker output.Purple/Black
Green wire to the rear left positive speaker output.
Green/Black wire to the rear left negative speaker output.
The following (3) wires are only for multimedia/navigation radios that require these wires.
wire to the VSS/speed sense wire.Blue/Pink
Green/Purple wire to the reverse wire.
Light Green wire to the parking brake wire
Tape off and disregard the following (2) wires, they will not be used in this application:
Brown Orange/White,
From the AXTO-CH2 harness to the aftermarket radio, connect the:
wire to the ground wire.Black
Yellow wire to the battery wire.
Orange wire to the illumination wire (if applicable).
12-pin AXSWC harness & 3.5mm jack:
The 12-pin harness & 3.5mm jack is to be used with the (sold separately) to AXSWC AXSWC
retain steering wheel audio controls. If the is not being used, disregard this harness. AXSWC
If it is to be used, refer to the AXSWC instructions for radio connections and programming.
Disregard the harness that comes with the .AXSWC


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: AXTO-CH2

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXTO-CH2 stil et spørgsmål nedenfor, og andre brugere vil svare dig