AXESS AXTO-MI3 Manual

AXESS Ikke kategoriseret AXTO-MI3

Læs gratis den danske manual til AXESS AXTO-MI3 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 51 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 26 anmeldelser. Har du et spørgsmål om AXESS AXTO-MI3, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

AXTO-MI3

I N S T A L L A T I O N I N S T R U C T I O N S

Product Info

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS & INSTALLATION ACCESSORIES REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Connections ............................................................2

Installation .............................................................3

Programming .........................................................3

Adjustments ...........................................................3

Mitsubishi Ampliﬁer Interface

2014-2019

APPLICATIONS

• Pre-wired AXSWC harness (AXSWC sold separately)

• Designed for ampliﬁed models

• Retains balance and fade

• Micro-B USB updatable

Mitsubishi

Lancer 2014-2017

Outlander 2014-2019

• AXTO-MI3 interface

• AXTO-MI3 harness

• 16-pin harness

CONNECTIONS

From the 16-pin harness to the aftermarket radio:

• Connect the wire to the amp turn on wire.Blue/White

• Connect the wire to the left front positive speaker output.White

• Connect the wire to the left front negative speaker output.White/Black

• Connect the wire to the right front positive speaker output.Gray

• Connect the Gray/Black wire to the right front negative speaker output.

• Connect the wire to the left rear positive speaker output.Green

• Connect the wire to the left rear negative speaker output.Green/Black

• Connect the wire to the right rear positive speaker output.Purple

• Connect the wire to the right rear negative speaker output.Purple/Black

• Tape off and disregard the following (6) wires , they will not be used in this application:

Blue/Pink Brown Green/Purple Light Green Orange/White, , , , , Red

From the AXTO-MI3 harness to the aftermarket radio:

• Connect the wire to the ground wire.Black

• Connect the Yellow wire to the battery wire.

• Connect the wire to the accessory wire.Red

• Connect the wire to the Illumination wire (If applicable).Orange

12-pin pre-wired AXSWC harness & 3.5mm jack:

•

This harness and 3.5mm jack is to be used along with the optional AXSWC (sold separately) to

retain steering wheel audio controls. If the AXSWC is not being used, disregard this harness. If

it will be used, refer to the vehicle speciﬁc AXSWC instruction from Axxess Interfaces for radio

connections and programming. Disregard the harness that comes with the AXSWC.

Produkt Specifikationer

Mærke:	AXESS
Kategori:	Ikke kategoriseret
Model:	AXTO-MI3

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXTO-MI3 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret AXESS Manualer

AXESS AXBUCH-MZ6V Manual

29 Juli 2025

AXESS AXABH-CH3 Manual

29 Juli 2025

AXESS AXDSPX-HK5 Manual

25 Februar 2025

AXESS AXAMP-CH8 Manual

25 Februar 2025

AXESS AXTC-MZ1 Manual

25 Februar 2025

AXESS AXBUCH-TYCAM26V Manual

25 Februar 2025

AXESS AXAMP-FD2 Manual

25 Februar 2025

AXESS AXBUCH-TYCAM36V Manual

25 Februar 2025

AXESS AXAMP-TY1 Manual

25 Februar 2025

AXESS AXAMP-TY4 Manual

25 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech MIC-711-OX Manual

30 Juli 2025

Intellinet 713108 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Advantech PCIE-1753 Manual

30 Juli 2025

MXR Rockman X100 Manual

30 Juli 2025

MIPRO MI-909R Manual

30 Juli 2025

Advantech AMAX-4870 Manual

30 Juli 2025

Advantech IDK-1112P-50XGA2 Manual

30 Juli 2025

MIPRO MP-820 Manual

30 Juli 2025

Advantech ARES-12290 Manual

30 Juli 2025