AXTO-VW1
I N S TA L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2020 METRA ELECTRONICS CORPORATION REV. 1/24/20 INSTAXTO-VW1
Attention! Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Small flat-blade
screwdriver • Tape • Wire cutter • Zip ties
VW Data Interface 2002-2017
• Provides accessory power (12-volt 10-amp)
• Maintains the retained accessory power (R.A.P.) feature
• Provides NAV outputs (parking brake, reverse, and speed sense)
• Prewired AXSWC harness (AXSWC sold separately)
• Retains balance and fade†
• Can be used in non-amplified or amplified models
(including Fender sound systems)
• Micro-B USB updatable
• AXTO-VW1 interface • AXTO-VW1 harness
• 16-pin harness with stripped leads
† Fade not retained in Fender sound systems
TABLE OF CONTENTS
Connections ............................................................2
Installation .............................................................3
Programming the AXTO-VW1 ................................3
Adjusting the AXTO-VW1 .......................................3
Troubleshooting .....................................................3
APPLICATIONS
VOLKSWAGEN
Beetle 2012-2015
CC 2009-2017
EOS 2007-2016
Golf 2002(ISO DDIN models only)
Golf, Golf R 2003-2014
GTI 2002-2005
Jetta (ISO DDIN models only) 2002
Jetta, Jetta GLI 2003-2015
Jetta SportWagen 2010-2014
Passat 2002-2015
Rabbit 2007-2009
Tiguan 2009-2015
Visit AxxessInterfaces.com for more detailed information about the product and up-to-date
vehicle specific applications