AXESS AXTRIG Manual


Læs gratis den danske manual til AXESS AXTRIG (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 13 anmeldelser. Har du et spørgsmål om AXESS AXTRIG, eller vil du spørge andre brugere om produktet?

Side 1/3
AXTRIG
INSTALL ATIO N IN STRUCT I ONS
REV. 12/31/19© COPYRIGHT 2019 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
INTRODUCTION
The AXTRIG emulates a parking brake signal for use in RV’s, off road vehicles,
and exhibition vehicles.
CAUTION!
All accessories, switches, climate controls panels, and especially air bag
indicator lights must be connected before cycling the ignition. Also, do not remove
the factory radio with the key in the on position, or while the vehicle is running.
Connections to be made
Wiring the AXTRIG:
1. Connect the wire to chassis ground.Black
2.
Connect the wire to the aftermarket radios amplifier turn-on wireBlue
.
3. Green Connect the wire to the parking brake wire of the aftermarket radio.
4. Connect the Yellow wire to the foot brake wire of the aftermarket radio
(Alpine only).
Attention! This product is meant to be used in RV’s, off road vehicles, and exhibition
vehicles only. Other applications are illegal.
K PNOWLEDGE IS OWER
Enhance your installation and fabrication skills by
enrolling in the most recognized and spected re
mobile elect nics school in our indust ry.ro
Log ont o www.installerinstit ute.com or call
800-354-6782 for mo informat ion and t ake steps re
toward a better tomorrow.
®
Metra r ecommends MECP
certified technicians


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: AXTRIG

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXTRIG stil et spørgsmål nedenfor, og andre brugere vil svare dig