AXESS AXVI-6524 Manual

AXESS Ikke kategoriseret AXVI-6524

Læs gratis den danske manual til AXESS AXVI-6524 (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om AXESS AXVI-6524, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

AXVI-6524

I N S TA L L AT I O N I N S T R U C T I O N S

INTERFACE FEATURES

INTERFACE COMPONENTS

TOOLS REQUIRED

• Crimping tool and connectors, or solder gun,

solder, and heat shrink • Tape • Wire cutter

• Zip ties

TABLE OF CONTENTS

Connections .........................................................2-3

Installation .............................................................3

Programming .........................................................3

App Instructions .................................................4-5

Jeep/Ram Select Models Data Interface 2014-Up

• Provides accessory power

(12-volt 10-amp)

• Retains R.A.P. (retained

accessory power)

• Provides NAV outputs (parking

brake, reverse, speed sense)

• Pre-wired AXSWC harness

(AXSWC sold separately)

• Retains the factory backup

camera (Not retained on

Wrangler JL or Gladiator)

• Retains balance and fade

•

Designed for non-ampliﬁed

models

• Retains the factory AUX-IN jack

• Allows retention and adjustment

of the Personalization Options*

• Adjust Personalization Options

through a Bluetooth application*

•

Smartphone application offering

full control from either Android or

Apple mobile devices

• Micro-B USB updatable

• AXVI-6524 interface

• AXVI-6524 harness

• 2-pin CAN harness

OPTIONAL ACCESSORIES

(sold separately)

Steering wheel control interface:

AXSWC OBD T-harness: AX-IL-OBD2

APPLICATIONS

* Actual options available vary per vehicle and per trim.

(Refer to owner’s manual for options available in vehicle)

Jeep

Gladiator* 2020-Up

Renegade 2015-2017

Renegade Sport 2018

Wrangler* JL (Base model) 2018-Up

Ram

Promaster (w/color screen) 2014-Up

Promaster City 2015-Up

* Camera will not be retainedNote:

ATTENTION: With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections, especially the air

bag indicator lights, are plugged in before

reconnecting the battery or cycling the

ignition to test this product.

NOTE: Refer also to the instructions included

with the aftermarket accessory before

installing this device.

Visit AxxessInterfaces.com for more detailed information about the

product and up-to-date vehicle speciﬁc applications

CONNECTIONS

From the AXVI-6524 harness harness to the aftermarket radio, connect as indicated:

• Connect the wire to the ground wire.Black

• Connect the Yellow wire to the battery wire.

• Connect the (3) wires to the accessory wire.Red

If installing an (sold separately), there will be an accessory wire there to Note: AXSWC

connect as well.

• If the aftermarket radio has an illumination wire, connect the wire to it.Orange

• Connect the Gray wire to the right front positive speaker wire.

• Connect the Gray/Black wire to the right front negative speaker wire.

• Connect the wire to the left front positive speaker wire.White

• Connect the wire to the left front negative speaker wire.White/Black

• Connect the wire to the left rear positive speaker wire.Green

• Connect the wire to the left rear negative speaker wire.Green/Black

• Connect the wire to the right rear positive speaker wire.Purple

• Connect the to the right rear negative speaker wire.Purple/Black

The following (3) wires are only for multimedia/navigation radios that require these wires.

• Connect the wire to the VSS/speed sense wire.Blue/Pink

• Connect the wire to the reverse wire.Green/Purple

• Connect the wire to the parking brake wire.Light Green

• Tape off and disregard the following (2) wires, they will not be used in this application:

Blue/White (qty. 2)

•

If retaining the factory backup camera, connect the Yellow RCA jack to the backup camera input

Note: For Wrangler JL and Gladiator the camera is not retained. You must purchase the

JP-JLKT for the JL and the JP-JTKT for the Gladiator to retain the camera

• If retaining the factory AUX-IN jack, connect the & RCA jacks to the AUX input.Red White

Continued on the next page

Produkt Specifikationer

Mærke:	AXESS
Kategori:	Ikke kategoriseret
Model:	AXVI-6524

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS AXVI-6524 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret AXESS Manualer

AXESS AXBUCH-MZ6V Manual

29 Juli 2025

AXESS AXABH-CH3 Manual

29 Juli 2025

AXESS AXDSPX-HK5 Manual

25 Februar 2025

AXESS AXAMP-CH8 Manual

25 Februar 2025

AXESS AXTC-MZ1 Manual

25 Februar 2025

AXESS AXBUCH-TYCAM26V Manual

25 Februar 2025

AXESS AXAMP-FD2 Manual

25 Februar 2025

AXESS AXBUCH-TYCAM36V Manual

25 Februar 2025

AXESS AXAMP-TY1 Manual

25 Februar 2025

AXESS AXAMP-TY4 Manual

25 Februar 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech MIC-711-OX Manual

30 Juli 2025

Intellinet 713108 Manual

30 Juli 2025

Electro Harmonix EU12AC-1000 Manual

30 Juli 2025

Advantech PCIE-1753 Manual

30 Juli 2025

MXR Rockman X100 Manual

30 Juli 2025

MIPRO MI-909R Manual

30 Juli 2025

Advantech AMAX-4870 Manual

30 Juli 2025

Advantech IDK-1112P-50XGA2 Manual

30 Juli 2025

MIPRO MP-820 Manual

30 Juli 2025

Advantech ARES-12290 Manual

30 Juli 2025