AXESS LOC-NIH1 Manual


Læs gratis den danske manual til AXESS LOC-NIH1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 22 anmeldelser. Har du et spørgsmål om AXESS LOC-NIH1, eller vil du spørge andre brugere om produktet?

Side 1/4
MetraOnline.com © COPYRIGHT 2023 METRA ELECTRONICS CORPORATION REV. 9/6/23 INSTAX-LOC
AX-LOC
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Things to Know 1 .......................................................
Connections
Adding a Subwoofer and Amplifier to Your
Factory system-Keeping Factory Speakers 2 ....
Adding a 4 Channel Amplifier-Entire System
Not Using Radio’s Output 3 .................................
Specifications 4 .........................................................
Please visit for the latest and up to date application information.AxxessInterfaces.com
TOOLS RECOMMENDED
• Digital Multi-meter
• Test Tones
Things to Know
LOC T-harnesses are installed at the radio and designed for non-amplified vehicles. You can find dash
disassembly instructions from the on Vehicle Fit Guide AxxessInterfaces.com
It is recommended that a polarity tester and tone generator be used before connecting your
aftermarket equipment.
If your vehicle doesn’t have an accessory circuit your will not have an accessory ( ) LOC T-Harness Red
wire in the harness. Refer to the instructions for remote turn on options. Some vehicles AX-LOC
require the addition of load resistors, there are multiple options available. We recommend AX-LR20,
AX-LR39, and AX-LR60.
Proper termination of loose wires is required.


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: LOC-NIH1

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS LOC-NIH1 stil et spørgsmål nedenfor, og andre brugere vil svare dig