AXESS USB-MINI-CAB Manual

AXESS Ikke kategoriseret USB-MINI-CAB

Læs gratis den danske manual til AXESS USB-MINI-CAB (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om AXESS USB-MINI-CAB, eller vil du spørge andre brugere om produktet?

Side 1/3
USB-MINI-CAB
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
REV. 10/16/13
Introduction
For installation and operation instructions, please go to
www.axxessinterface.com (http://www.axxessinterface.com/) and click on
the “Firmware Downloads” tab.
USB-MINI-CAB
INSTRUCTIONS
1. Download the webxxpress updater program from
www.axxessinterface.com.
2. Once downloaded double click the webxxpress program icon located on
your desktop and follow prompts. Note: For windows Vista users right
click on icon and click “run as administrator”.
3. Once installed connect the USB-MINI-CAB to your computer
(sold separately) and follow prompts to install drivers. Note: Not all
computers will need to do this.
4. Once drivers are installed open the USB bootloader program which is
located in the “all program” section of your start menu.
5. Open up the Axxess interface box that needs to be updated to access the
micro “B” port on the circuit board.
6. With the USB boot loader program opened, click “update unit board”.
When prompted, plug the USB-MINI-CAB into the micro “B” port of the
Axxess interface and the board will begin to update to the latest version.


Produkt Specifikationer

Mærke: AXESS
Kategori: Ikke kategoriseret
Model: USB-MINI-CAB

Har du brug for hjælp?

Hvis du har brug for hjælp til AXESS USB-MINI-CAB stil et spørgsmål nedenfor, og andre brugere vil svare dig