B-Tech BT5833-150/B Manual

B-Tech Flad panel støtte BT5833-150/B

Læs gratis den danske manual til B-Tech BT5833-150/B (8 sider) i kategorien Flad panel støtte. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om B-Tech BT5833-150/B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

B-TECH AUDIO VIDEO MOUNTS

www.btechavmounts.com

CONTENTS

INSTALLATION TOOLS REQUIRED

FLAT SCREEN CEILING MOUNT

INSTALLATION GUIDE

Installation Safety Notes.....................................................................................................................2

System V™ Flat Screen Mount Chart................................................................................................4

Installation Instructions.......................................................................................................................5

Product Dimensions...........................................................................................................................7

B-Tech Contact Details......................................................................................................................8

PLEASE KEEP THIS FOR FUTURE REFERENCE

Flathead

screwdriver

Drill

Pencil

10mm (7/16") masonry bit

or 6mm (1/4") wood bit

The System V™ range is available in

package or component form.

This installation guide demonstrates

how to install and use the System V™

at screen mounting range from

B-Tech.

13mm (1/2") spanner

or socket

Saw

(Optional)

REGISTERED DESIGN

BT5810-075

BT5810-150

BT5811-075

BT5811-150

BT5832-075

BT5832-150

BT5833-075

BT5833-150

INSTALLATION SAFETY INSTRUCTIONS

CAUTION:

This mount is intended for use

only with the maximum weights indicated. Use with

at screens heavier than the maximum indicated may result

in instability causing possible injury.

Do not attempt to install this product until all instructions and warnings have been read and properly

understood. Please keep these instructions for future reference.

B-Tech International Limited, its distributors and dealers are not liable or responsible for damage or

injury caused by improper installation, improper use or failure to observe these safety instructions. In

such cases, all guarantees will expire.

General

B-Tech International Ltd recommends that a professional AV installer or other suitably qualied

person install this product. Great care must always be taken during installation as most AV equipment

is of a fragile nature, possibly heavy and easily damaged if dropped.

If you do not fully understand the instructions or are not sure how to install this product safely, then

please consult a professional for advice and/or to install this product for you. Failure to mount this

product correctly may cause serious injury or death both during installation and at any time thereafter.

Do not mount any AV equipment that exceeds the specic weight limit of the product you are

installing. This weight limit will be clearly stated on each product and its packaging and will vary from

product to product.

Product location

Please pay careful attention to where this product is located. Some ceilings are not suitable for

installation.

If located in a public or frequently populated area ensure that the product is out of the immediate

reach of people. If any AV equipment is to be suspended over the likely path or location of people

then great care should be taken to secure all parts of the installation from falling.

If you install this product on drywall it must be securely xed to a wooden stud, concrete block or other

permanent structure behind the drywall board. Installing on drywall boards alone will not support the

weight o

f most AV equipment.

When drilling holes in walls it is essential to avoid contact with electrical cables and water or gas pipes

contained within. Use of a good quality live wire detector and hidden object locator is therefore

recommended. Only drill into structures when you are sure it is safe to do so.

Fixing hardware

It is highly recommended that all wall xing screws be used where supplied and that the purpose of all

other xing hardware is fully understood. In some cases more AV equipment xing hardware will be

supplied to accommodate dierent models of equipment and set up congurations.

The installer must be satised that any supplied xing hardware is suitable for each specic

installation. If any xing screws or included hardware are deemed not sucient for a safe installation

then please consult a professional or your local hardware store.

Hazard limitation

When routing cables take advantage of any built in cable management features that the product might

provide and ensure that all cables are tidy and secure. Check to see that any moving aspect of the

product can do so unhindered by any cabling.

Some products have moving parts and the potential to cause injury through the crushing or trapping of

ngers or other body parts.

Particula

r attention to the nature of moving parts is required especially when assembling installing and

adjusting during set up.

Immediately after installations double-check that the work done is safe and secure. Double-check all

necessary xings are present and are of ample tightness.

It is recommended that periodic inspections of the product and its xing points are made as frequently

as possible to ensure that safety is maintained. If in doubt consult a professional AV installer or other

suitably qualied person.

Produkt Specifikationer

Mærke:	B-Tech
Kategori:	Flad panel støtte
Model:	BT5833-150/B
Produktfarve:	Sort
Monteringstype:	Loft
Hældningsvinkelområde:	-40 - 40 °
Maksimal vægtkapacitet:	25 kg
Forbedret kabelstyring:	Ja
Armlængde:	1545 mm
Maksimal skærmstørrelse kompatibilitet:	32 "
Antal understøttede skærme:	1
Montering interface kompatibilitet (min.):	200 x 200 mm
Montering interface kompatibilitet (maks.):	200 x 200 mm