Be Quiet! Silent Wings Pro 4 Manual

Be Quiet! Ventilator Silent Wings Pro 4

Læs gratis den danske manual til Be Quiet! Silent Wings Pro 4 (2 sider) i kategorien Ventilator. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Be Quiet! Silent Wings Pro 4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Installation of the hard plastic fittings
Installation der Hart-Kunststoff-Befestigungen
Clip the hard plastic elements from above onto the fitting lock. Use the hard plastic
element with the marking Corner Type B for the fitting lock where the fan cable is. Use
the hard plastic elements with the marking Corner Type A for the remaining fitting locks.
Stecken Sie das Kunststoff-Element von oben auf den Steckverschluss. Verwenden Sie das
Kunststoff-Element mit der Aufschrift Corner Type B für den Steckverschluss, an dem
das Lüfterkabel rausführt. Verwenden Sie die Kunststoff-Elemente mit der Aufschrift
Corner Type A für die restlichen Steckverschlüsse.
Screw down the fan using the included screws.
Verschrauben Sie den Lüfter mittels beiliegender Schrauben.
To remove the hard plastic elements, press down the latching lugs on the right and left
side to remove the hard plastic elements. Then pull the mounting element upwards.
Drücken Sie zum Entfernen der Hart-Kunststoff-Elemente die Einrast-Nasen auf der rechten
und linken Seite runter. Ziehen Sie nun das Montage-Element nach oben weg.
Warranty
5 years manufacturer guarantee for consumers
(original purchase from authorised be quiet! dealers
only).Guarantee work can only be processed with an
included copy of the purchase receipt from an
authorised be quiet! dealer. Manipulation of any
kind, structural changes of any kind as well as
damages through external mechanical forces lead
to a complete voiding of the guarantee. Our General
Warranty Conditions apply, which can be viewed on
the Internet on www.bequiet.com.
Listan GmbH . Wilhelm-Bergner-Straße 11c . 21509
Glinde . Germany
For further information, you can contact us via e-mail:
service@bequiet.com
Garantie
5 Jahre Herstellergarantie für Endkonsumenten (nur
Ersterwerb vom autorisierten be quiet! Händler),
ab Datum des Kaufbelegs. Eine Garantieabwick-
lung ist nur in Verbindung mit einer beigefügten
Kopie des Kaufbelegs eines autorisierten be quiet!
Händlers möglich. Manipulationen und bauliche
Veränderungen jeglicher Art sowie Beschädigungen
durch äußere mechanische Einwirkungen führen
zum totalen Garantieverlust. Es gelten unsere
Allgemeinen Garantiebestimmungen, die Sie unter
www.bequiet.com im Internet abrufen können.
Listan GmbH . Wilhelm-Bergner-Straße 11c
. 21509
Glinde . Deutschland
Für weitere Unterstützung erreichen Sie uns via
E-Mail: service@bequiet.com
Version: V1/22 bequiet.com
» Product information for this fan
» Produktinformationen zu diesem Lüfter
» Informations produit pour ce ventilateur
» Información del producto para este ventilador
» Informacje prouktowe dla tego wentylatora
» Productinformatie voor deze ventilator
» Produktinformation för denna fläkt
» Подробная информация о данном вентиляторе
» 此風扇的產品資料
» 此风扇的产品资料
» この扇風機の商品情報
NL
SE
www.bequiet.com/bl099
The speed switch allows to change between mid-speed, high-speed and ultra high-speed.
To change the fan speed, pull the switch to the desired position.
Der Speed-Switch ermöglicht den Wechsel zwischen mid-speed, high-speed und ultra high-speed.
Um die Drehzahl zu ändern, schieben Sie den Speed-Switch in die gewünschte Richtung.
3
120mm 140mm
M 1600rpm 1100rpm
HS 2500rpm 1900rpm
UHS 3000rpm 2400rpm
The fan is then mounted into place using the washers and push-pins.
Zur Montage des Lüfters verwenden Sie die Unterlegscheiben sowie die Push-Pins zur Fixierung.
Installation of the anti-vibration fittings
Installation der Anti-Vibrations-Befestigungen
The rubber elements as well as the fitting locks are engraved on the inside.
• When positioned towards “L” there is 1mm gap between the housing and the fan
frame, resulting in the maximum possible decoupling.
• When you position the rubber elements towards “S” they fit flush with the housing.
Die Antivibrationselemente sowie die jeweiligen Steckverschlüsse sind innen beschriftet.
• In Richtung „L“ eingesetzt ist zwischen dem Gehäuse und Lüfterrahmen 1mm Luft.
Dies hat eine maximal mögliche Entkopplung zur Folge.
• Setzt man die Gummi-Elemente in Richtung „S“ ein, schließen diese mit dem
Gehäuse bündig ab.
be quiet! Limited Warranty »
Per the terms and conditions of this limited warranty as
given below, be quiet! warrants its new products to be
free of defects resulting from faulty materials and faulty
manufacturing for the length of the warranty period.
I. APPLICABILITY
This non-transferable warranty is applicable to newly
purchased, previously unopened be quiet! products and
is enforceable by only the original consumer purchaser.
Proof of purchase is required for warranty service, so
should be retained. be quiet! does not provide warranty
registration services.
II. WARRANTY PERIOD
For eligible products, parts and labor are warranted
for the applicable warranty period from the date of
purchase. The applicable warranty period varies by
product model, and is identified in your user docu-
mentation, on the product package, or as listed below.
Should any of these warranty periods differ, the longest
specified warranty period will apply. Replaced products
will be warranted for the remainder of the original warranty
period or thirty days, whichever is longer.
III. EXCLUSIONS
The following are not covered by the warranty:
1. Normal wear and tear.
2. Any product which has been modified without permission
from be quiet!, or on which the serial number or warranty
sticker has been defaced, modified, or removed.
3. Damage, deterioration or malfunction resulting from:
• Accident, abuse, misuse or improper use, neglect,
connection to an improper voltage source, unauthorized
product modification, or failure to follow instructions
included with the product.
• Fire, water, lightning, or other acts of nature.
• Repair or attempted repair by anyone not authorized by
be quiet!.
• Shipping or transport damage (claims must be made
with the carrier).
• Any other cause which does not relate to a defect in
materi-als or manufacturing workmanship.
4. Cartons, cases, batteries, cabinets, tapes, accessories
or other consumables used with this product.
5. be quiet!, Inc. does not warrant that this product
will meet your requirements. It is your responsibility to
determine the suitability of this product for your purpose.
6. Removal or installation charges.
7. Shipping charges.
8. Any incidental charges.
IV. EXCLUSION OF DAMAGES
be quiet!‘s sole obligation and liability under this war-
ranty is limited to the repair or replacement of a de-
fective product at its option. be quiet! shall not, in any
event, be liable for any special, incidental, indirect, or
consequential damages whatsoever, including but not
limited to loss of profits, revenue, or data (whether direct or
indirect), damages resulting from interruption of service
and loss of business, or for liability in tort relating to this
product or resulting from its use or possession, even if
be quiet! has been advised previously of the possibility of
such damages.
V. LIMITATIONS OF IMPLIED WARRANTIES
There are no other warranties, expressed or implied,
including but not limited to those of merchantability or
fitness for a particular purpose. The duration of implied
warranties is limited to the warranty length specified in
Paragraph II.
VI. LOCAL LAW AND YOUR WARRANTY
This warranty gives you specific legal rights. You may
also have other rights granted under local law. These
rights may vary.
VII. NO OTHER WARRANTY
No be quiet! employee, dealer, or other agent is authorized
to make any modification, extension, or addition to this
warranty.
VIII. TO OBTAIN TECHNICAL SUPPORT OR WARRANTY
SERVICE
Please see your product owner’s manual or visit the
Online Support section at www.bequiet.com for details and
contact information. You will need to provide proof of
purchase for warranty service.
Version: V1/22 bequiet.com
To remove the anti-vibration fittings follow the instructions on page 1.
Zum Entfernen der Anti-Vibrations-Befestigungen folgen Sie bitte den Erklärungen auf S.1.
i
2

Produkt Specifikationer

Mærke: Be Quiet!
Kategori: Ventilator
Model: Silent Wings Pro 4

Har du brug for hjælp?

Hvis du har brug for hjælp til Be Quiet! Silent Wings Pro 4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ventilator Be Quiet! Manualer

Be Quiet!

Be Quiet! Light Wings LX Manual

3 Januar 2025
Be Quiet!

Be Quiet! Shadow Wings 2 Manual

30 August 2024
Be Quiet!

Be Quiet! Light Wings White Manual

31 Juli 2024
Be Quiet!

Be Quiet! Silent Wings 4 Manual

29 April 2024
Be Quiet!

Be Quiet! Silent Wings Pro 4 Manual

25 December 2023
Be Quiet!

Be Quiet! Light Wings Manual

20 December 2022

Ventilator Manualer

Nyeste Ventilator Manualer

Be Cool

Be Cool BC18STTIDC Manual

11 September 2025
NuTone

NuTone QTXN110HL Manual

10 September 2025
NuTone

NuTone 744LEDNT Manual

10 September 2025
Ardes

Ardes AR5ST40PNR Manual

10 September 2025
Waves

Waves FAN-105064 Manual

10 September 2025
LTC

LTC LXWT112 Manual

9 September 2025
LTC

LTC LXWB17 Manual

9 September 2025
Waves

Waves FAN-105062 Manual

9 September 2025
NuTone

NuTone QTRN080L Manual

9 September 2025
LTC

LTC LXGA30 Manual

9 September 2025