BeamZ SNOW 900 Manual

BeamZ Vi SNOW 900

Læs gratis den danske manual til BeamZ SNOW 900 (16 sider) i kategorien Vi. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om BeamZ SNOW 900, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
SNOW RGB LED 900
Ref. nr.:160.555
INSTRUCTION MANUAL
GEBRUIKSAANWIJZING
BEDIENUNGSANLEITUNG
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
INSTRUKC JA OBSŁUGI
V1.1
ENGLISH
Congratulations to the purchase of this Beamz product. Please read this manual thoroughly prior to using the product in order to
benet fully from all features.
Read the manual prior to using the product. Follow the instructions in order not to invalidate the warranty. Take all precautions
to avoid re and/or electrical shock. Repairs must only be carried out by a qualied technician in order to avoid electrical shock.
Keep the manual for future reference.
- Prior to using the product, please ask advice from a
specialist. When the unit is switched on for the rst time,
some smell may occur. This is normal and will disappear
after a while.
- The unit contains voltage carrying parts. Therefore do
NOT open the housing.
- Do not place metal objects or pour liquids into the
product. This may cause electrical shock and
malfunction.
- Do not place the product near heat sources such as
radiators, etc. Do not place the unit on a vibrating
surface. Do not cover the ventilation holes.
- The product is not suitable for continuous use.
- Be careful with the mains lead and do not damage it. A
faulty or damaged mains lead can cause electrical shock
and malfunction.
- When unplugging the product from a mains outlet,
always pull the plug, never the lead.
- Do not plug or unplug the unit with wet hands.
- If the plug and/or the mains lead are damaged, they
need to be replaced by a qualied technician.
- If the product is damaged to such an extent that internal
parts are visible, do NOT plug the unit into a mains outlet
and DO NOT switch the product on. Contact your dealer.
Do NOT connect the product to a rheostat or dimmer.
- To avoid re and shock hazard, do not expose the
product to rain and moisture.
- All repairs should be carried out by a qualied technician
only.
- Connect the product to an earthed mains outlet (220-
240Vac/50Hz) protected by a 10-16A fuse.
- During a thunderstorm or if the product will not be used
for a longer period of time, unplug it from the mains. The
rule is: Unplug it from the mains when not in use.
- If the product has not been used for a longer period of
time, condensation may occur. Let the unit reach room
temperature before you switch it on. Never use the
product in humid rooms or outdoors.
- During operation, the housing becomes very hot. Do not
touch it during operation and immediately after.
- To prevent accidents in companies, you must follow the
applicable guide lines and follow the instructions.
- Secure the product with an extra safety chain if the unit is
ceiling mount. Use a truss system with clamps. Make
sure nobody stands in the mounting area. Mount the
eect at least 50cm away from inammable material and
leave at least 1 meter space on every side to ensure
sucient cooling.
- This product contains high intensity LEDs. Do not look
into the LED light to prevent damage to your eyes.
- Do not repeatedly switch the product on and o. This
shortens the life time.
- Keep the unit out of the reach of children. Do not leave
the unit unattended.
- Do not use cleaning sprays to clean switches. The
residues of these sprays cause deposits of dust and
grease. In case of malfunction, always seek advice from
a specialist.
- Only operate the product with clean hands.
- Do not force the controls.
- If the product has fallen, always have it checked by a
qualied technician before you switch the product on
again.
- Do not use chemicals to clean the unit. They damage the
varnish. Only clean the product with a dry cloth.
- Keep away from electronic equipment that may cause
interference.
- Only use original spares for repairs, otherwise serious
damage and/or dangerous radiation may occur.
- Switch the product o prior to unplugging it from the
mains and/or other equipment. Unplug all leads and
cables prior to moving the product.
- Make sure that the mains lead cannot be damaged when
people walk on it. Check the mains lead before every use
for damages and faults!
- The mains voltage is 220-240Vac/50Hz. Check if power
outlet match. If you travel, make sure that the mains
voltage of the country is suitable for this product.
- Keep the original packing material so that you can
transport the product in safe conditions
This mark attracts the attention of the user to high voltages that are present inside the housing and that are of sucient
magnitude to cause a shock hazard.
This mark attracts the attention of the user to important instructions that are contained in the manual and that he should
read and adhere to.
DO NOT LOOK DIRECTLY INTO THE LENS. This can damage your eyes. Persons who are subject to epileptic attacks
should be aware of the eects that this light eect may have on them.
The product has been certied CE. It is prohibited to make any changes to the product. They would invalidate the CE certicate
and their guarantee!
NOTE: To make sure that the unit will function normally, it must be used in rooms with a temperature between 5°C/ °F 41 and
35 95°C/ °F .
Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your
dealer about the way to proceed. The specications are typical. The actual values can slightly change from one unit to the other.
Specications can be changed without prior notice.
prior notice.
Do not attempt to make any repairs yourself. This would invalid your warranty. Do not make any changes to the product. This would also
invalid your warranty. The warranty is not applicable in case of accidents or damages caused by inappropriate use or disrespect of the
warnings contained in this manual. Beamz cannot be held responsible for personal injuries caused by a disrespect of the safety
recommendations and warnings. This is also applicable to all damages in whatever form.

Produkt Specifikationer

Mærke: BeamZ
Kategori: Vi
Model: SNOW 900

Har du brug for hjælp?

Hvis du har brug for hjælp til BeamZ SNOW 900 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vi BeamZ Manualer

BeamZ

BeamZ F1500 160.510 Manual

13 Januar 2025
BeamZ

BeamZ F900 160.507 Manual

2 Oktober 2024
BeamZ

BeamZ ICE700 160.514 Manual

31 Juli 2024
BeamZ

BeamZ S500PC 160.432 Manual

29 Juli 2024
BeamZ

BeamZ SNOW 900 Manual

28 Juli 2024
BeamZ

BeamZ ICE1800 160.518 Manual

25 Juli 2024
BeamZ

BeamZ S700 160.438 Manual

24 Juli 2024
BeamZ

BeamZ S1200 MKII 160.491 Manual

21 Juli 2024

Vi Manualer

Nyeste Vi Manualer

Ikea

Ikea SMÅBIT 705.570.95 Manual

19 Februar 2025
Ikea

Ikea VARDAGEN 002.947.24 Manual

19 Februar 2025
Ikea

Ikea VÖRDA 303.411.73 Manual

19 Februar 2025
Ikea

Ikea VÖRDA 202.892.36 Manual

19 Februar 2025
Ikea

Ikea VARDAGEN 202.947.18 Manual

19 Februar 2025
Ikea

Ikea VÖRDA 002.891.62 Manual

19 Februar 2025
Ikea

Ikea FÖRSLAG 303.468.30 Manual

19 Februar 2025
Ikea

Ikea VÖRDA 802.892.43 Manual

19 Februar 2025
Ikea

Ikea VÖRDA 402.891.60 Manual

19 Februar 2025
Ikea

Ikea VARDAGEN 202.947.23 Manual

19 Februar 2025