Behringer HC 2000B Manual

Behringer Headset HC 2000B

Læs gratis den danske manual til Behringer HC 2000B (4 sider) i kategorien Headset. Denne vejledning er vurderet som hjælpsom af 71 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 36 anmeldelser. Har du et spørgsmål om Behringer HC 2000B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Quick Start Guide

HC 2000B

Studio-Quality Wireless Headphones with

Bluetooth® Wireless Technology Connectivity

Controls

(1) POWER button switches the headphones on and off.

(2) PLAY/PAUSE button begins and pauses audio

playback. Secondary call functions include Answer

Call/End Call/Reject Call (press and hold).

(3) MICRO USB jack is for charging rechargeable

batteries.

(4) MICROPHONE can be used for talkback during

phone calls.

(5) AUX IN stereo jack can be used to listen to audio from

external devices as normal wired headphones using

audio cables with 3.5 mm stereo connectors.

(6) BLUETOOTH LED shows the Bluetooth status

(blinking blue and red = in pairing mode;

blue = connected; blinking blue = audio

playback underway).

(7) CHARGE LED shows the charge status

(red = charging; blue = fully charged).

(8) FORWARD/VOLUME button can be used to

increase volume (short press), skip to the next

song (long press), or begin/end a phone call on a

Bluetooth-connected mobile phone.

(9) BACK/VOLUME button can be used to decrease

volume (short press) or skip to the previous song

(long press).

(1) (6) (5) (4) (3) (7)

(2)

(9)

(8)

Getting started

Power Supply

The unit is powered by a built-in, lithium-polymer rechargeable

battery. Charge the built-in battery for at least four hours before

using the device for the  rst time.

To charge the internal battery, follow these steps:

1. Connect the smaller end of the supplied USB cable to the

MICRO USB jack.

2. Connect the other end to a powered USB jack on your computer

or an AC power supply (not included).

3. The CHARGE LED indicator will change color to red

during charging.

4. When fully charged, the CHARGE LED indicator will turn blue.

⚠ Warnings:

• Do not throw batteries in  re!

• While using the built-in battery, the environmental

temperature should be 5° C (41° F) to 35° C (95° F).

• To get the longest service life for the built-in battery, charge at

room temperature.

• Attention should be drawn the environmental aspects of

battery disposal.

• Battery shall not be exposed to excessive heat such as

sunshine,  re or the like.

• When the battery is low, the unit will beep every 20 seconds.

The unit will turn o automatically when the battery is too low

to work.

Turning the unit on/o

1. Long press the POWER button to turn ON the unit. The

BLUETOOTH LED indicator will light on.

2. Long press the POWER button again turn OFF the unit. The

BLUETOOTH LED indicator will turn o .

Bluetooth pairing

1. Long press to turn ON the unit. The BLUETOOTH LED indicator

will blink blue and red alternately to indicate the unit is in

pairing mode.

2. On the Bluetooth device, enable Bluetooth and select “HC

2000B” from the Device List. (Refer to the user manual of your

Bluetooth device for detailed operations.)

3. If the Bluetooth device prompts for a passcode, use “0000”.

Some Bluetooth devices will ask you to accept and con rm the

connection. If the units are paired properly, you will hear an

indication sound. If pairing is not successful within 10 minutes,

the headphones will turn o automatically.

NOTE: If you want to connect your headphones to another

Bluetooth audio device, you need to disconnect the current device

 rst and follow the above steps to make a new connection.

Using A Bluetooth Device

1. When successfully paired, sound from your Bluetooth device

will be audible through the headphones

2. Press the PLAY/PAUSE button to pause playback. Press again to

resume playback.

3. Short press the FORWARD/BACK buttons to adjust the

headphone volume. You can also adjust the volume directly on

your paired Bluetooth device.

4. Long press the FORWARD/BACK buttons to select your desired

audio  le.

NOTE: The BLUETOOTH LED indicator will blink blue

during playback.

Receiving A Phone Call

These headphones are equipped with a built-in microphone, which

allows you to make calls on a Bluetooth-enabled mobile phone.

Make sure your Bluetooth-enabled mobile phone is paired with the

headphones. When a call comes in to the connected mobile phone,

you will hear an incoming call alert on the headphones.

1. Press the FORWARD button to answer the incoming call.

2. Press the FORWARD button again to end the call.

3. The reject the incoming call, press and hold the BACK button.

4. To transfer the sound between the headphones and the mobile

phone, press and hold the PLAY/PAUSE button during the call.

Produkt Specifikationer

Mærke:	Behringer
Kategori:	Headset
Model:	HC 2000B
Produktfarve:	Sort
Batterispænding:	3.7 V
Batterikapacitet:	185 mAh
Produkttype:	Headset
Bluetooth:	Ja
Batteriteknologi:	Lithium polymer (LiPo)
USB-stik:	Micro-USB
Volumenkontrol:	Knap
Antal:	1
Bluetooth-version:	5.0
Anbefalet brug:	Scene/studie
Impedens:	- ohm (Ω)
Forbindelsesteknologi:	Trådløs
Certificering:	FCC
LED-indikatorer:	Bluetooth,Status
Batterilevetid (maks.):	7 t
Bæremåde:	Headset
Headset type:	Binaural
3,5 mm stik:	Ja
USB-tilslutning:	Ja
Hovedtelefon frekvens:	20 - 20000 Hz
Mikrofontype:	Indbygget
Batteridrevet:	Ja
Batteritype:	Indbygget batteri
Opladningstid for batteri:	3 t
Frekvensbånd:	2.4 - 2.48 GHz
Trådløs rækkevidde:	10 m
Ørekobling:	Circumaural
Akustisk system:	Lukket
Betjeningstaster:	Play/pause,Track <,Track >,Volume +,Volume -
Vedvarende afspilningstid, lyd:	7 t