Berker 2912 Manual

Berker Skifte 2912

Læs gratis den danske manual til Berker 2912 (6 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Berker 2912, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

BLC relay insert HVAC

Order-No. : 2912

Operation- and

Assembly Instructions

1 Safety instructions

Electrical equipment may only be installed and fitted by electrically skilled persons.

Failure to observe the instructions may cause damage to the device and result in fire and

other hazards.

Danger of electric shock. Always disconnect before carrying out work on the devise or

load. At the same time, take into account all circuit breakers that supply dangerous

voltage to the device or load.

Danger of electric shock. Device is not suitable for disconnection from supply voltage.

Danger of electric shock on the SELV/PELV installation. Not suitable for switching SELV/

PELV voltages.

Danger of electric shock. Do not operate the insert without a cover.

These instructions are an integral part of the product, and must remain with the end

customer.

2 Device components

picture 1

(1) Flush-mounted insert

(2) Frame

(3) Pushbutton cover

(4) Adjuster for run-on time of output HLK

(5) Connection terminals for mains voltage and output Kanal 1

(6) Connection terminals for output HLK for HVAC

Seite 1/6

BLC relay insert HVAC

82541321

97-09545-000

30.07.2010

BLC

3 Function

Intended use

- Output Kanal 1 for switching light

- Output HLK for switching light, fans, air conditioners, thermostats and motors

- Operation with suitable cover

- Installation in appliance box to DIN 49073

Product characteristics

- Output HLK with potential-free NO contact for switching a second electric circuit, not SELV

or PELV

- Switch-on delay of output HLK can be switched off

- Run-on time of output HLK adjustable

- Connection of extensions possible

Function with motion detector or presence detector cover

Output Kanal 1

- Output is switched on if motions are detected and the brightness is below the threshold set

on the cover.

- Output remains switched on as long as motions are detected.

- Output is switched off if no more motions are detected and the run-on time set on the cover

has elapsed.

Output HLK

- Switch-on delay switched on: output is switched on independently of the brightness after

3 minutes if additional motions are detected approx. 2.5 to 3 minutes after the initial

detection.

- Switch-on delay switched off: output is switched on independently of brightness if motion is

detected.

- Output remains switched on as long as motions are detected.

- Output is switched off if no more motions are detected and the run-on time set on the insert

has elapsed.

Behaviour after a mains voltage failure

- Less than 0.2 seconds: switching state is retained

- longer than 0.2 seconds: both channels switch off. The behaviour after mains voltage

return depends on the cover used (see instructions for the cover).

4 Operation

Switching on with pushbutton cover (see Accessories)

Operation on the main device, 2-wire extension or on the installation button is identical.

i Extension operation is only possible if there is a cover fitted on the main device.

Outputs are switched off.

o Press the button.

Output Kanal 1 switches on.

When the switch-on delay for output HLK is switched off, output HLK switches on directly.

When the switch-on delay for output HLK is switched on, output HLK switches on with a

time delay, if output Kanal 1 is switched on for longer than 3 minutes.

Switching off with pushbutton cover (see Accessories)

Outputs are switched on.

o Press the button.

Output Kanal 1 switches off.

Output HLK switches off after the run-on time set on the insert elapses. The run-on time

begins as soon as output Kanal 1 has switched off.

Seite 2/6

30.07.2010

82541321

97-09545-000

BLC

BLC relay insert HVAC

Produkt Specifikationer

Mærke:	Berker
Kategori:	Skifte
Model:	2912
Antal pr. pakke:	1 stk
Produktfarve:	Grå
Certificering:	CE

Har du brug for hjælp?

Hvis du har brug for hjælp til Berker 2912 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Berker Manualer

Berker 80040001 Manual

29 December 2024

Berker 80040011 Manual

29 December 2024

Berker 2912 Manual

29 December 2024

Berker 80161865 Manual

16 December 2024

Berker 80262280 Manual

16 December 2024

Berker 80141170 Manual

16 December 2024

Berker 80162785 Manual

16 December 2024

Berker 80164773 Manual

16 December 2024

Berker 80162865 Manual

16 December 2024

Berker 80162780 Manual

16 December 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025