Bernina DCE-T 2500 overlock Manual

Bernina Symaskine DCE-T 2500 overlock

Læs gratis den danske manual til Bernina DCE-T 2500 overlock (82 sider) i kategorien Symaskine. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Bernina DCE-T 2500 overlock, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/82

Instruction Manual

Overlocker / Serger

2500

DCET

Umschlag_GB.indd 1 10.10.2007 16:18:59 Uhr

Safety Instructions

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic safety precautions

should always be followed, including the following. Read all

instructions before using this overlock sewing machine.

DANGER

To reduce the risk of electric shock:

1. The appliance should never be left unattended when

plugged in.

2. Always unplug this appliance from the electric outlet

immediately after using and before cleaning.

3. Always unplug before relamping. Replace bulb with the

same type rated max.12 volts/5 watts.

WARNING

To reduce the risk of burns, fire, electric shock or injury

to persons:

1. Do not allow this appliance to be used as a toy. Close

attention is necessary when this appliance is used by or

near children.

2. Use this appliance only for its intended use as described

in this manual. Use only attachments recommended by

the manufacturer as contained in this manual.

3. Never operate this appliance if it has a damaged cord or

plug, if it is not working properly, if it has been dropped

or damaged or dropped into water. Return the appliance

to the nearest authorized dealer or service center for

examination, repair, electrical or mechanical adjustment.

4. Never operate the appliance with any air openings blo-

cked. Keep ventilation openings of the sewing machine

and foot controller free from accumulation of lint, dust

and loose cloth.

5. Keep fingers away from all moving parts. Special care is

required around the sewing needle and knife.

6. Always use the proper needle plate. The wrong plate can

cause the needle to break.

7. Do not use bent needles.

8. Do not pull or push fabric while stitching. It may deflect

the needle causing it to break.

9. Switch the sewing machine off («O») when making any

adjustments in the needle area, such as threading needle,

changing needle, threading looper, or changing presser

foot and the like.

10. Always unplug the machine from the electrical outlet

when removing covers, lubricating or when making any

other user servicing adjustments mentioned in the

instruction manual.

11. Never drop or insert any object into any opening.

12. Do not use outdoors.

13. Do not operate where aerosol (spray) products are being

used or where oxygen is being administered.

14. To disconnect, turn all controls to the off («0») position,

then remove plug from outlet.

15. Do not unplug by pulling on cord. To unplug, grasp the

plug not the cord.

16. Basically, the machine should be disconnected from the

electricity supply when not in use.

17. This appliance is provided with double insulation (except

USA/CANADA). Use only identical replacement parts. See

instructions for servicing of double insulated products.

SERVICING DOUBLE-

INSULATED PRODUCTS

(except USA/CANADA)

In a double-insulated product, two systems of insulation are

provided instead of grounding. No grounding means is

provided on a double-insulated product nor should a means

for grounding be added to the product. Servicing a double-

insulated product requires extreme care and knowledge of

the system and should only be done by qualified service

personnel. Replacement parts for a double-insulated product

must be identical to those parts in the product. A double

insulated product is marked with the words «DOUBLE

INSULATION» or «DOUBLE INSULATED».

The symbol may also be marked on the product.

SAVE THESE

INSTRUCTIONS!

This overlock/cover stitch machine is intended for household

use only.

2500_DCE_1_englisch_neu 09.10.2007 14:32 Uhr Seite 3

Produkt Specifikationer

Mærke:	Bernina
Kategori:	Symaskine
Model:	DCE-T 2500 overlock

Har du brug for hjælp?

Hvis du har brug for hjælp til Bernina DCE-T 2500 overlock stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Symaskine Bernina Manualer

1 August 2025

31 Juli 2025

31 Juli 2025

31 Juli 2025

29 Juni 2025

29 Juni 2025

29 Juni 2025

15 Oktober 2024

15 Oktober 2024

15 Oktober 2024

Symaskine Manualer

Nyeste Symaskine Manualer

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

9 August 2025

Juki MS-1261A-DWS Manual

9 August 2025