Black Box INDRy II S LIG401A Manual

Black Box Skifte INDRy II S LIG401A

Læs gratis den danske manual til Black Box INDRy II S LIG401A (2 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Black Box INDRy II S LIG401A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com

Page 5 Page 6

Black Box and the Double Diamond logo are registered trademarks of

BB Technologies, Inc. Any other trademarks mentioned in this manual

are acknowledged to be the property of the trademark owners.

Quick Start Guide

LIG401A has (4) RJ-45 and (1) SFP ports.

LIE401A has (4) RJ-45 PoE+ and (1) SFP ports.

Industrial Gigabit Ethernet Switches

LIG401A

LIE401A

LIG401A, LIE401A Quick Start Guide

1. What’s Included

Your package should contain the following items. If any-

thing is missing or damaged, contact Black Box Technical

Support at 724-746-5500 or info@blackbox.com.

• (1) Industrial Gigabit Ethernet Switch -

(4) RJ-45, (1) SFP (LIG401A)

(1) Industrial Gigabit Ethernet PoE+ Switch - (4) RJ-45, (1)

SFP (LIE401A)

• (2) wallmount brackets

• (1) DIN-rail clip

• (4) M4 screws (for the wallmount brackets

or DIN-rail clip)

• (1) DC power terminal block

• This Quick Start Guide

2. Overview

The Industrial Gigabit Ethernet Switches support standard

industrial applications without complex setup to make the

network truly plug-and-play.

WARNING! When a connector is removed during

installation, testing, or servicing, or when an

energized fiber is broken, your eyes might be

exposed to to hazardous laser output power.

Mechanical

Connectors LIG401A:

(5) RJ-45, 10/100/1000 Mbps

speed auto-negotiation,

MDI-MDI-X auto-crossover

(1) 100/1000BASE-SFP

module slot;

LIE401A:

(5) RJ-45, IEEE 802.3at

PoE PSE ports,

10/100/1000 Mbps speed

auto-negotiation,

MDI-MDI-X auto-crossover;

(1) 100/1000BASE-SFP

module slot

Ingress protection IP30

Dimensions (without

DIN rail clip)

LIG401A: 4.4”H x 1.1”W x 3.5”D

(11.2 x 2.9 x 8.9 cm);

LIE401A: 5.4”H x 1.1”W x 4.2”D

(13.9 x 2.9 x 10.7 cm)

Weight LIG401A: 0.70 lb. (0.32 kg);

LIE401A: 1 lb. (0.46 kg)

Installation Options DIN-rail mounting;

Wallmounting

Power

PoE LIG401A: No;

LIE401A: Yes

Input Redundant input terminals, reverse power pro-

tection

Input Voltage LIG401A: 12–58 VDC;

LIE401A: 12–58 VDC, 54–58 V

for PoE+, 48–58 V for PoE

Environmental

Operating

Temperature

-40 to +167° F (-40 to +75° C), cold startup at

-40° C

Storage Temperature -40 to +185° F (-40 to +85° C)

Humidity 5 to 95% RH (non-condensing)

Specifications

LED Name Status Condition

PoE

(LIE401A only)

ON, Green PoE is working

OFF PoE is not working

P1 ON, Green P1 power line has power

OFF P1 power line is disconnected

or does not have power

P2 ON, Green P2 power line has power

OFF P2 power line is disconnected

or does not have power

Alarm ON, Red Power failure alarm occurs

OFF No power failure alarm

(4) Link/Act

LEDs for RJ-45

ports

On, Green Ethernet link is up but no

traffic is detected

OFF Ethernet link is down

(4) Speed LEDs

for RJ-45 ports

ON, Yellow 1000-Mbps connection is

detected.

OFF No link, a 10-Mbps or 100-

Mbps connection is detected

(1) Link/Act LED

for SFP port

ON, Green Ethernet link is up

OFF Ethernet link is down

(1) Speed LED

for SFP port

ON, Yellow SFP port speed 1000-Mbps

connection is detected

OFF No link, or an SFP port speed

100-Mbps connection is

detected

LIG401A, LIE401A Quick Start Guide

LED Indicators on the LIE401A and LIG401A

lig401a_lie401a_qsg_rev1

Order toll-free in the U.S.:

Call 877-877-BBOX

(outside U.S. call 1-724-746-5500)

FREE technical support

24 hours a day, 7 days a week:

Call 724-746-5500 or

fax 724-746-0746

Web site: www.blackbox.com

E-mail: info@blackbox.com

Customer

Support

Information

724-746-5500 | blackbox.com724-746-5500 | blackbox.com 724-746-5500 | blackbox.com

LIG401A, LIE401A Quick Start Guide LIG401A, LIE401A Quick Start Guide

Page 3Page 2 Page 4

3. Installation

3.1 Mounting the Switch on a DIN Rail

1. Screw the DIN rail bracket onto the switch with the included

bracket and screws.

2. Hook the switch-DIN-rail-bracket assembly over the DIN rail.

3. Push the bottom of the assembly towards the DIN rail until it

snaps into place.

Figure 3-1. Din-rail mounting.

3.2 Mounting the Switch on a Wall

Screw the wall mount brackets on using the included M4 screws.

Figure 3-2. Wallmounting.

3.3 Connecting to Ground

The switch must be properly grounded for optimum system

performance.

FIgure 3-3. Grounding points on the LIG401A and LIE401A.

3.4 Connecting the Ethernet Interface

3.4.1 Connecting the RJ-45 Electrical Interface

To connect to a PC, use a straight-through or crossover Ethernet cable.

To connect the switch to an Ethernet device, use unshielded

twisted-pair (UTP) or shielded twisted-pair (STP) Ethernet cables.

The RJ-45 connector’s pinout is shown in Table 3-1.

Table 3-1. RJ-45 connector pinout.

Pin Assignment PoE Assignment (LIE401A only)

1, 2 TX/RX+, TX/RX- Positive Vport

3, 6 TX/RX+, TX/RX- Negative Vport

4, 5 TX/RX+, TX/RX- Not used

7, 8 TX/RX+, TX/RX- Not used

3.4.2 Connecting the Fiber SFP Interface

To connect to a fiber port, install a fiber SFP module into the SFP

slot on the switch. Compatible SFP modules are listed in Table 4-2.

DANGER! Do not look directly into the optical beam emitted

from the fiber connectors. Your eyes might be damaged!

Table 3-2. Compatible SFP modules.

Part Number Description

LSP421 10GBASE-SR SFP+ Extended Diagnostics, LC

multimode 850 nm, 300 m

LSP422 10GBASE-LR, SFP+ Extended Diagnostics, LC

single-mode, 1310 nm, 10 km

LFP411 SFP/1250 Extended Diagnostics, LC multimode, 850

nm, 550 m

LFP412 SFP/1250 Extended Diagnostics, LC multimode, 1310

nm, 2 km

LFP413 SFP/1250 Extended Diagnostics, LC

single-mode, 1310 nm, 10 km

LFP414 SFP/1250 Extended Diagnostics, LC

single-mode, 1310 nm, 40 km

LFP401 SFP/155 Extended Diagnostics, LC multimode, 850 nm,

2 km

LFP403 SFP/155 Extended Diagnostics, LC single-mode, 1310

nm, 30 km

LFP404 SFP/155 Extended Diagnostics, LC single-mode, 1310

nm, 60 km

LFP402 SFP/155 Extended Diagnostics, LC multimode, 1310

nm, 2 km

LFP418 SFP/1250 Extended Diagnostics, LC single-mode, 1550

nm, 80 km

LFP420 Simplex SFP/1250, Extended Diagnostics, single-mode,

1550 nm TX, 1310 nm RX

Table 3-2 (continued). Compatible SFP modules.

Part Number Description

LFP421 Simplex SFP/1250, Extended Diagnostics, single-mode,

1310 nm TX, 1550 nm RX

3.5 Connecting the Power

The switch is powered by redundant power supplies. To install,

insert the positive and negative wires into V+ and V- contacts on

the terminal block and tighten the wire-clamp screws to prevent

the wires from loosening.

NOTE: Input power for the LIE401A ranges from 54–58 VDC for

PoE+ and 48–58 VDC for PoE.

3.6 Connecting the Alarm Relay (LIG401A only)

The alarm relay output contacts are in the middle of the DC

terminal block connector as shown in Figure 3-4.

Figure 3-4. Alarm relay output contacts on the LIG401A.

Insert the wires and set the DIP switch of the respective port alarm

to ON. The relay output will detect if a port fails, and form a short

circuit. The alarm relay out is “Normal Open.”

4. DIP Switch Settings

Table 4-1. DIP switch settings on the LIG401A.

DIP Switch Status Description

1 ON

OFF

ON enables the power alarm;

OFF disables the power alarm.

2 ON

OFF

ON enables broadcast storm limit;

OFF disables broadcast storm limit

Table 4-2. DIP switch settings on the LIE401A.

DIP Switch Status Description

1 ON

OFF

ON enables broadcast storm limit

OFF disables broadcast storm limit

2 NOT USED NOT USED

LIG401A, LIE401A Quick Start Guide

LIG401A LIE401A

Produkt Specifikationer

Mærke:	Black Box
Kategori:	Skifte
Model:	INDRy II S LIG401A

Har du brug for hjælp?

Hvis du har brug for hjælp til Black Box INDRy II S LIG401A stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte Black Box Manualer

Black Box ACX300-R Manual

4 Oktober 2024

Black Box KV9604A Manual

1 September 2024

Black Box LIE1014A Manual

23 August 2024

Black Box ACR1000A-CTL-288 Manual

23 August 2024

Black Box LGB5510A Manual

23 August 2024

Black Box LGB304AE Manual

23 August 2024

Black Box AVS-HDB-4KO Manual

23 August 2024

Black Box ACR1000A-R-R2 Manual

23 August 2024

Black Box LGH1006A Manual

23 August 2024

Black Box DCX3000-DVR Manual

10 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025