Blebox wLightBoxS Manual

Blebox Smart hjem wLightBoxS

Læs gratis den danske manual til Blebox wLightBoxS (2 sider) i kategorien Smart hjem. Denne vejledning er vurderet som hjælpsom af 60 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 30.5 anmeldelser. Har du et spørgsmål om Blebox wLightBoxS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

USER GUIDE

wlightBoxs

CONTROL LIGHTING FROM ANY PLACE IN THE WORLD

wlightBoxS is a miniature device that allows you to control the brightness

of single color LED lighting by using smartphones and tablets.

Do not connect the device to loads exceeding the recommended

values.

Connect only in accordance with the manual. Improper connections

may be dangerous.

DANGER! Even when the device is turned off, voltage may be present

at its terminals. Any works introducing changes into the configuration

of connections or the load must be always performed with

disconnected voltage (disable the fuse)

INSTALLATION

1. The device must be installed in a place protected from the inclement

conditions and the environment - for example in a flush-mounted box.

Remember that metal parts (cables, housing parts) negatively may affect the

device signal, and therefore, the user comfort. Due to the voltage necessary

for the device work, the connector of the controller should be protected

against accidental contacts or short circuits, which could cause an electric

shock or equipment damage.

2. Once familiar with the connection diagram, proceed to install the

controller. Paying attention to the description of the connectors, connect the

power wire. Connect the „+” wire (usually marked with a dotted line on a

black wire or a red wire) and the „-” (usually black) to the controller. Connect

the light source. In this case LED strip. Connect the „+” (cathode) to the

terminal „+” and the „-” (anode) to the output (OUT).

FIRST USE

3. After making sure that the device is connected properly and near the

controller there are no metal objects that could accidentally cause short-

circuit, turn on the electricity.

4. Unlock your smartphone or tablet and download the free app wBox. If you

have a device with Android system, find the app in the Play Store. For iOS

system the application is in the App Store. For Windows Phone, the

application is in the Windows Store.

5. Using a mobile phone or tablet, connect it to the device WiFi network. To

do this, go to smartphone settings, WiFi networks configuration and find the

network called "wLightBoxS-xxxxxxxxxx" where xxxxxxxxxx is the device serial

number.

6. Open the wBox application. At the top of the screen will appear the device.

To add it to the list, click on the ikon "+" on the right side, next to the name.

Test the controller’s work moving the scrollbar checking from extreme to the

intermediate positions. If the light source change its brightness, you can

proceed to the next step.

DEVICE SETTINGS

7. After the first start of the controller, you can proceed to the further

configuration. Being connected to the WiFi network "wLightBoxS-xxxxxxxxxx"

in the application wBox control panel, select the device, open "Settings" at

the top-right corner of the screen. We recommend changing the device

name, user name and the password of WiFi network generated by the device.

Keep in mind that changing the network name or password, the device will

disconnect, and will require re-connect to the network in your phone or

tablet settings. To return to the control, click on „wLightBoxS" at the top-left

corner of the screen.

8. You can add the controller to your home WiFi network to control it by this

network, or from any place in the World. To do this, turn on the application

wBox, go to the device settings, scroll down the screen, select the network

name from the list and click "Connect". If is required, enter the WiFi network

password. While connecting the device to the home network, the phone may

be disconnected from the device network. In that case, you have to re-

connect your phone or tablet to the controller network. From now, if the

mobile device will disconnect from your home network, the user still has the

ability to control the device, the only requirement is access to the Internet

on your phone or tablet - WiFi or mobile internet.

For more information visit our website www.blebox.eu or contact us by email

to info@blebox.eu. Technical support support@blebox.eu.

Proudly made by:

Blebox sp. z o.o.

Kunickiego 63, 54-616Wrocław,

Poland, www.blebox.e

Produkt Specifikationer

Mærke:	Blebox
Kategori:	Smart hjem
Model:	wLightBoxS

Har du brug for hjælp?

Hvis du har brug for hjælp til Blebox wLightBoxS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Smart hjem Blebox Manualer

Blebox SwitchBox Manual

29 August 2024

Blebox switchBoxD Manual

29 August 2024

Blebox wLightBoxS Manual

29 August 2024

Blebox wlightbox Manual

29 August 2024

Blebox dimmerBox Manual

29 August 2024

Blebox LightBox Manual

29 August 2024

Smart hjem Manualer

Nyeste Smart hjem Manualer

Aqara Smoke Detector Manual

2 December 2025

Aqara Door and Window Sensor P2 Manual

2 December 2025

Lenovo EPC300 Manual

20 November 2025

EZVIZ T35W Matter Manual

15 November 2025

EZVIZ T30-10E-EU Manual

15 November 2025

EZVIZ T31-16E-EU Manual

14 November 2025

Aqara Smart Wall Switch Manual

7 November 2025

Aqara Smart Wall Switch H1 Manual

3 November 2025

Aqara Wall Outlet H2 Manual

2 November 2025

Kidde 60WLDR-W-CA Manual

2 November 2025