Blustream DA11ADE Manual

Blustream Digitale decoder DA11ADE

Læs gratis den danske manual til Blustream DA11ADE (4 sider) i kategorien Digitale decoder. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Blustream DA11ADE, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
DA11ADE QUICK REFERENCE GUIDE
01
Contact: support@blustream.com.au support@blustream-us.com support@blustream.co.uk| |
Our DA11ADE has been designed to decode two Dante® digital signals to two
unbalanced or balanced analogue audio channels. The DA11ADE is a plug & play
device that is powered using either PoE (Power Over Ethernet) from any PoE
network switch or via local a 12V power supply input. The DA11ADE also supports
AES67 RTP audio transport.
Introduction
DA11ADE
Quick Reference Guide
• Decodes two Dante® digital signals to two unbalanced or balanced analogue audio channels
• Supports 44.1, 48 & 96 KHz sample rates @ 24 Bit
• Configurable Dante® device latency (supports 1, 2 or 5ms configurable using Dante® Controller)
• Supports AES67 RTP audio transport
• Features Class 3 802.3af PoE for powering of product from any PoE switch
• Local 12V power supply input for when network switch does not support PoE*
* PS121PH power supply sold separately
FEATURES:
Connections:
1 Dante® Audio Input - RJ45 socket connects Dante® network.
2 DC Input - Connect to +12VDC power supply (not supplied) if
device is not powered via a PoE switch
3 Audio Output - Phoenix Connector accepts balanced or
unbalanced 2 channel audio output.
Front Panel
1
Rear Panel
3
Wiring Configuration
Balanced - XLR Unbalanced - RCA
+
-
-
+
2
DA11ADE QUICK REFERENCE GUIDE
02 www.blustream.com.au | www.blustream-us.com www.blustream.co.uk|
Dante Controller
Dante Controller soware is required in order to setup and configure the DA11ADE as well as control your Dante
network. Audinate provide extensive training videos and documentation on their website. This can be found here:
http://www.audinate.com/products/soware/dante-controller
Upon connecting your DA11ADE to a compatible network, the Dante Controller soware should automatically
discover the device. The DA11ADE will appear in the Dante Controller with a name denoted with “BLS”. On the
“Routing” screen you can create audio routing between Dante transmitters and receivers in your system.
Please ensure your PC is on the same network as your Dante devices. Dante is not able to transmit over WiFi and it
is recommended to hardwire into the Dante network. Having multiple network devices enabled can also confuse
the Dante Controller soware so it is recommended to disable WiFi during configuration.
By default the DA11ADE is shipped with its network settings set to obtain an IP Address automatically. This means
that if a DHCP server is present on your network, it will provide the DA11ADE with an IP Address. If no DHCP server
is present then the DA11ADE will receive a default IP Address in the 169.254.xxx.xxx range. To change the IP Address
of the DA11ADE, you must enter the “Network Config” menu in the “Device Info” screen of the Dante Controller
soware.

Produkt Specifikationer

Mærke: Blustream
Kategori: Digitale decoder
Model: DA11ADE

Har du brug for hjælp?

Hvis du har brug for hjælp til Blustream DA11ADE stil et spørgsmål nedenfor, og andre brugere vil svare dig


Digitale decoder Blustream Manualer

Blustream

Blustream DA11ADE Manual

2 September 2024

Digitale decoder Manualer

Nyeste Digitale decoder Manualer

Teradek

Teradek Cube 625 Manual

29 Marts 2025
Teradek

Teradek Slice 776 Manual

28 Marts 2025
Axis

Axis T8705 Manual

20 Februar 2025
Savio

Savio DT-DV02 Manual

11 Februar 2025
IFM

IFM RC1023 Manual

30 December 2025
IFM

IFM RC6036 Manual

30 December 2025
Massoth

Massoth 8156101 Manual

26 December 2024
Atlantis Land

Atlantis Land SM20-DH18 Manual

25 December 2024
IFM

IFM RU1091 Manual

6 December 2024
IFM

IFM RU1150 Manual

6 December 2024