Bogen WBS8T725V Manual

Bogen Højttaler WBS8T725V

Læs gratis den danske manual til Bogen WBS8T725V (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Bogen WBS8T725V, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Features

Wall Baffle Wooden

Speaker Assemblies

Models

WBS8T725 & variations,

WBS810T725

• 4-watt capacity

• 6 power taps available (4, 2, 1 1, /2, /4, 1 1/8 watts)

• Works with both 70V and 25V amplifier outputs

• Simulated walnut finish

• Pre-assembled for faster installation

• 8" cone speaker for excellent audio quality

• 6 oz. or 10 oz. magnet weights

• Recessed volume control available (V models only)

• Screw terminals available (BR models only)

• Easy wall-mount installation

• Mounting hardware included

Specifications subject to change without notice.

54-7777-09A 0808

WBS8T725

Description

Bogen Wall Baffle Speakers consist of 8" cone speakers (S86 or S8 0) pre-assembled into a simulated wal-1

nut-finished wooden enclosure with a black grille cloth on front.These wall baffles are handsomely styled

and ruggedly built with 3/8" particle board reinforced at the corners. Designed for wall mounting, the face

is angled downward 13.5 degrees. Available options include recessed volume control and terminal strip.

Technical

Specifications

Model

Power Taps

(in Watts)

Frequency Response

Sensitivity (4 ft./1W)

Magnet Weight

No Volume Control

Recessed Volume

Control (V)

Screw Terminals (BR)

Shipping Weight

(4/Carton)

Dimensions

WBS8T725

4, 2, 1 1, /2, /4, /81 1

@25V & 70V

50 Hz-

12 kHz

dBspl 6 oz.

●

18 lb. /

carton 9-1/2" W x

9-1/2" H x

5-1/4" D

(3-1/4" D

@ bottom)

WBS8T725V ●

WBS8T725BR ● ●

WBS8T725BRV ● ● 19 lb. /

carton

WBS810T725 70 Hz-

15 kHz

dBspl 10 oz. ●20 lb. /

carton

50 Spring Street, Ramsey, NJ 07446, U.S.A.

Tel: 201-934-8500; FAX: 20 -934-9832; www.bogen.com1

WBS8T725 The surface-mounting loudspeaker

assembly shall be a Bogen model WBS8T725

(or W B S 8 T7 2 5 V , W B S 8 T7 2 5B R , or

WBS8T725BRV), or equivalent, 8" cone-type

loudspeaker having a frequency response of at least

50 Hz to 2 kHz. Axial sensitivity shall be 95 dB,1

measured at 1-watt/4 feet. The loudspeaker shall

have a 6 oz. ceramic magnet and a 3/4" voice coil. A

transformer, capable of matching an 8-ohm loud-

speaker to a 25-volt or 70-volt line, and providing

power taps of 4, 2, 1 1, /2, 1/4, and /8 watts shall be1

included. The transformer primary and secondary

leads shall be stripped, tinned, and shall be at least 6"

in length.

The loudspeaker shall be assembled in a wall baffle

for surface mounting, angled 3.5 degrees for down-1

ward sound dispersion. The baffle shall be con-

structed of 3/8” particle board, glued and covered in

simulated walnut vinyl. Glue blocks shall be used to

reinforce all side corner joints. The speaker opening

shall be covered with a black grille cloth. Overall

dimensions shall be 9- /2" W x 9- /2" H x 5-1 1 1/4" D

(top) x 3-1/4" D (bottom).

(For WBS8T725V add) The assembly shall include

a control for adjusting the volume of the loudspeaker.

(For WBS8T725BR add) A terminal strip shall

be included for connection of the audio line.

Terminals shall be labeled for 4, 2, 1 1, /2, 1/4, and

1/8-watt power connection.

(For WBS8T725BRV add) A terminal strip shall

be included for connection of the audio line.

Terminals shall be labeled for 4, 2, 1 1, /2, 1/4, and 1/8-

watt power connection. A control shall also be includ-

ed for adjusting the volume of the loudspeaker.

WBS810T725 The surface mounting loudspeaker

shall be a Bogen model WBS810T725, or equiva-

lent, 8" cone-type loudspeaker having a frequency

response of at least 70 Hz to 15 kHz. Axial sensitiv-

ity shall be 96 dB, measured at 1-watt/4-feet. The

loudspeaker shall have a 0 oz. ceramic magnet and1

a 1" voice coil. A transformer, capable of matching

an 8-ohm loudspeaker to a 25-volt or 70-volt line,

and providing power taps of 4, 2, 1 1, /2, 1/4, and 1/8

watts shall be included. The transformer primary

and secondary leads shall be stripped, tinned, and

shall be at least 6" in length.

The loudspeaker shall be assembled in a wall baffle

for surface mounting, angled 3.5 degrees for down-1

ward sound dispersion. The baffle shall be con-

structed of 3/8" particle board, glued and covered in

simulated walnut vinyl. Glue blocks shall be used to

reinforce all side corner joints. The speaker opening

shall be covered with a black grille cloth. Overall

dimensions shall be 9- /2" W x 9- /2" H x 5-1 1 1/4" D

(top) x 3-1/4" D (bottom).

Architect

and Engineer

Specifications

Line

Drawings

Rear View Side View

WBS8T725BR

Produkt Specifikationer

Mærke:	Bogen
Kategori:	Højttaler
Model:	WBS8T725V
Produktfarve:	Valnød
Wi-Fi:	Ingen
Bluetooth:	Ingen
Udgangseffekt (RMS):	4 W
Materiale:	Træ
Anbefalet brug:	Universel
Frekvensområde:	50 - 12000 Hz
Forbindelsesteknologi:	Ledningsført
Lyd-output kanaler:	1.0 kanaler
Højttaler, placering:	Kan monteres på væggen
Strømkilde type:	Vekselstrøm
Effektkrav:	70V/25V
Antal drivere:	1
Sensitivitet:	95 dB
Antal produkter inkluderet:	1 stk
Højttaler kabinet:	Lukket
Subwoofer driver diameter (britisk):	8 "
Dybde (efter britisk standard):	5.25 "
Højde (efter britisk standard):	9.5 "
Bredde (efter britisk standard):	9.5 "