Boss Reverb RV-6 Manual

Boss Ikke kategoriseret Reverb RV-6

Læs gratis den danske manual til Boss Reverb RV-6 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 72 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 36.5 anmeldelser. Har du et spørgsmål om Boss Reverb RV-6, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Owner’s Manual

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (supplied on a separate sheet).

After reading, keep the document(s) including those sections where it will be available for immediate reference.

Precautions When Connecting

To prevent malfunction and equipment failure, always turn

down the volume, and turn o all the units before making any

connections.

Once the connections have been completed, turn on power to

your various devices in the order specied. By turning on devices

in the wrong order, you risk causing malfunction and/or damage

to speakers and other devices.

When powering up: Turn on the power to your guitar amp last.

When powering down: Turn o the power to your guitar amp rst.

This unit is equipped with a protection circuit. A brief interval

(a few seconds) after power up is required before the unit will

operate normally.

Immediately after the unit is powered-on, the eect is on.

Use of Battery

A battery was installed in the unit before it left the factory. The life

of this battery may be limited, however, since its primary purpose

was to enable testing.

If you handle batteries improperly, you risk explosion and uid

leakage. Make sure that you carefully observe all of the items

related to batteries that are listed in “USING THE UNIT SAFELY” and

“IMPORTANT NOTES” (supplied on a separate sheet).

When operating on battery power only, the unit’s indicator will

become dim when battery power gets too low. Replace the

battery as soon as possible.

Batteries should always be installed or replaced before connecting

any other devices. This way, you can prevent malfunction and

damage.

If operating this unit on battery, please use alkaline battery.

Changing the Battery

1. Hold down the pedal and

loosen the thumbscrew ,

then open the pedal upward.

* The pedal can be opened without

detaching the thumbscrew

completely.

2. Remove the old battery from

the battery housing , and

remove the battery snap

connected to it.

3. Connect the battery snap to the new battery, and place

the battery inside the battery housing.

* Be sure to carefully observe the battery’s polarity (+ versus -).

4. Slip the coil spring onto the spring base on the

back of the pedal, and then close the pedal.

* Carefully avoid getting the battery snap cord caught in the

pedal, coil spring, and battery housing.

5. Insert the thumbscrew into the guide bush hole and

tighten it securely.

INPUT Jacks/OUTPUT Jacks

9 0Mono input Mono output

RV-6

9 0Mono input Stereo output

RV-6

9 0Stereo input Stereo output

RV-6

9 Outputting only the reverb sound

RV-6

Reverb sound

By plugging into INPUT-B, you can have only the reverb sound be

output (the direct sound is not output).

* When the ee ct is o, the output from OUTPUT-A (MONO) and

OUTPUT-B is muted.

Mode List

+DELAY

This is reverb combined with delay. The synergistic eect

provides rich reverberation.

SHIMMER

This reverb is distinctive for its sparkling high-frequency

range. It produces fantasy-like reverberation wrapped in

spacious overtones.

DYNAMIC

This reverb automatically sets the depth of the eect

according to your performance. It produces deep

reverberation without blurring the overall shape of your

playing.

ROOM

This reverb simulates the reverberation of a room. It

produces warm reverberation.

HALL

This reverb simulates the reverberation of a hall. It

produces clear and spacious reverberation.

PLATE

This simulates a plate reverb (a reverb unit that uses the

vibration of a metal plate). It produces metallic-sounding

reverberation with an extended high-frequency range.

SPRING This simulates a spring reverb built into a guitar amp.

MODULATE

This reverb adds modulation to hall reverb, producing

extremely good-feeling reverberation.

Specications

Nominal Input Level -20 dBu

Input Impedance 1 MΩ

Nominal Output

Level

-20 dBu

Output Impedance 1 kΩ

Recommended Load

Impedance

10 kΩ or greater

Power Supply Alkaline battery (9 V, 6LR61)

AC adaptor (PSA series: sold separately)

Current Draw 95 mA

* Expected battery life under continuous use:

Alkaline: 3 hours

These gures will vary depending on the

actual conditions of use.

Dimensions 73 (W) x 129 (D) x 59 (H) mm

2-7/8 (W) x 5-1/8 (D) x 2-3/8 (H) inches

Weight 450 g / 1 lb (including battery)

Accessories Leaet (“USING THE UNIT SAFELY,” “IMPORTANT

NOTES,” and “Information”)

Alkaline battery (9 V, 6LR61)

Options

(sold separately)

AC adaptor (PSA series)

Expression pedal (EV-30, FV-500H, FV-500L,

Roland EV-5)

* 0 dBu = 0.775 Vrms

* This document explains the specications of the product at the time

that the document was issued. For the latest information, refer to the

Roland website.

9 V Battery

English

Main Features

Panel Descriptions

7The RV-6 is a multi-function high-quality reverb that packs studio-level quality into a compact pedal.

7Cutting-edge digital technology provides a total of eight modes, which include standard reverb as well as types that are immediately usable for live performance or recording.

7The optimal reverb is automatically output according to the in/out connections. You can also use an expression pedal to control the reverb depth while you perform.

AC Adaptor

(PSA series: optional)

TONE knob

Adjusts the tone color of the reverb sound.

DC IN jack

Accepts connection of an AC Adaptor (PSA series; optional). By using an AC Adaptor, you can play without

being concerned about how much battery power you have left.

* Use only the specied AC adaptor (PSA series; sold separately), and connect it to an AC outlet of the

correct voltage. Do not use any other AC adaptor, since this may cause malfunction.

* If the AC adaptor is connected while a battery is installed, the power

supply is drawn from the AC adaptor.

* We recommend that you keep batteries installed in the unit even

though you’ll be powering it with the AC adaptor. That way, you’ll be

able to continue a performance even if the cord of the AC adaptor gets

accidently disconnected from the unit.

CHECK indicator

This indicator shows whether the eect is on or o, and also doubles as the battery check

indicator. The indicator lights when the eect is on.

* If you’re powering the unit with a battery and the CHECK indicator goes dim— or doesn’t

light at all—when you try to turn the eect on, the battery is near depletion and should be

replaced. For instructions on changing the battery, refer to “Changing the Battery.”

OUTPUT jacks A (MONO)/B

Pedal switch

This switch turns the eect on/o.

* The reverb sound remains even when you turn o the eect.

Thumbscrew

When this screw is loosened, the

pedal will open, allowing you to

change the battery.

* For instructions on changing

the battery, refer to “Changing

the Battery.”

E. LEVEL knob

Adjusts the volume of the reverb sound.

TIME knob

Adjusts the length (time) of the reverb sound.

Mode knob

Selects the reverb eect mode. Refer to “Mode List.”

INPUT jacks A (MONO)/B

These jacks accepts signals coming from

a guitar or other musical instrument, or

another eects unit.

* The INPUT jack doubles as the power switch.

Power to the unit is turned on when you plug

into the INPUT jack; the power is turned o

when the cable is unplugged. To prevent

unnecessary battery consumption, be sure to

disconnect the plug from the INPUT jack when

not using the eects unit.

Electric guitar

EXP jack

If you connect an expression pedal (Roland EV-5, BOSS

EV-30) to this jack, you can use it to control the reverb

depth.

* Use only the specied expression pedal (Roland

EV-5, BOSS EV-30; sold separately). By connecting

any other expression pedals, you risk causing

malfunction and/or damage to the unit.

Roland EV-5

Guitar amplier

These output jacks can be connected to an

amplier or another eect unit.

Produkt Specifikationer

Mærke:	Boss
Kategori:	Ikke kategoriseret
Model:	Reverb RV-6

Har du brug for hjælp?

Hvis du har brug for hjælp til Boss Reverb RV-6 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Boss Manualer

Boss XS-1 Manual

1 Oktober 2025

Boss GX-10 Manual

29 September 2025

Boss SDE-3000EVH Manual

18 Juli 2025

Boss VE-22 Manual

25 Februar 2025

Boss SDE-3 Manual

23 Januar 2025

Boss Distortion DS-1X Manual

1 Januar 2025

Boss RC-505MK2 Manual

1 Januar 2025

Boss GM-800 Manual

1 Januar 2025

Boss Waza Craft DM-2W Manual

1 Januar 2025

Boss BC-1X Manual

16 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Childhome Two by Two Manual

31 Oktober 2025

RaySafe Pro Digi Phantom Manual

31 Oktober 2025

ErgoAV ERFFL4-01BG Manual

31 Oktober 2025

IFM EBC026 Manual

31 Oktober 2025

Eizo DuraVision SGX0031 Manual

31 Oktober 2025

EtherWAN EX89000 Manual

31 Oktober 2025

ErgoAV ERFFX4-01GB Manual

31 Oktober 2025

Moultrie EXO Manual

31 Oktober 2025

EtherWAN EX78000 Manual

31 Oktober 2025

Yamazen KS-AA30 Manual

31 Oktober 2025