Braeburn 5970 Manual


Læs gratis den danske manual til Braeburn 5970 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Braeburn 5970, eller vil du spørge andre brugere om produktet?

Side 1/2
READ ALL INSTRUCTIONS BEFORE PROCEEDING
WARNING!
Important
Information
Universal
Thermostat
Guard
Read this manual thoroughly prior to installing thermostat guard.
Verify dimensions given in this manual and on the product to ensure product is suitable
for your application.
Prior to finishing installation, refer to applicable thermostat manual and test
thermostat operation.
This thermostat guard should only be used as described in this manual. Any other use
is not recommended and will void the warranty.
For a replacement key, please contact our Customer Service Department at
1-866-268-5599.
MODEL
5970
USER MANUAL
The Braeburn 5970 Thermostat Guard is a universal thermostat guard
that covers and protects wall thermostats against damage, tampering
and unauthorized adjustment of thermostat settings. The 5970
thermostat guard includes a clear plastic guard cover and ring base,
opaque plastic wallplate, wallplate template, screws, anchors and
tumbler lock with two keys. This thermostat guard is ideal for offices,
lobbies, hospitals, schools, supermarkets, restaurants, convenience
stores and other public areas to prevent unauthorized personnel from
adjusting the temperature. This thermostat guard can be used in new
and existing thermostat applications.
fold
®
The Braeburn
®
5970 Thermostat Guard can be used in virtually all new or existing
thermostat applications. The enclosed template provides mounting locations for a wide
range of commercial thermostat models.
With most existing thermostat applications, the thermostat guard can be installed
without removing the thermostat from the wall. In existing applications, only the cover
and ring base will be used, NOT the wallplate. For some existing installations the
thermostat may need to be removed from the subbase to install ring base.
In new thermostat applications, the thermostat guard can be used with or without
the wallplate. The wallplate is usually used to cover scratches or marks from the old
thermostat installation.
1.1 Installing Thermostat Guard with Existing Thermostat
1. Place the ring base over the existing thermostat on the wall with curved edge of the ring base facing down.
NOTE: Some thermostats will need to be removed from the subbase before installing the ring base.
2. Align the ring base with the existing thermostat and level.
3. Mount the ring base on the wall using the four provided anchors and screws.
4. Mount the thermostat guard cover by placing the hinged edge of the thermostat guard cover over the top edge of the
ring base and lowering the cover to the ring base. NOTE: The key must be in the UNLOCKED position.
5. Lock the thermostat guard by turning the provided key counterclockwise. The key can ONLY be removed when it is in
the LOCKED position.
1
WALL
THERMOSTAT
RING BASE
MOUNTING
SCREWS (4)
MOUNTING
HOLES (4)
INSTALLATION
1


Produkt Specifikationer

Mærke: Braeburn
Kategori: Ikke kategoriseret
Model: 5970

Har du brug for hjælp?

Hvis du har brug for hjælp til Braeburn 5970 stil et spørgsmål nedenfor, og andre brugere vil svare dig