B/R/K 7010BE Manual

B/R/K Røgdetektor 7010BE

Læs gratis den danske manual til B/R/K 7010BE (7 sider) i kategorien Røgdetektor. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 14 anmeldelser. Har du et spørgsmål om B/R/K 7010BE, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/7
Printed in Mexico
M09-0019-002 Q06/04
IMPORTANT! PLEASE READ CAREFULLY AND SAVE.
This user’s manual contains important information about your Smoke
Alarm’s operation. If you are installing this Smoke Alarm for use by others,
you must leave this manual—or a copy of it—with the end user.
TABLE OF CONTENTS
Fire Safety Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
Before You Install This Smoke Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
How To Install This Smoke Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Mandatory Locking Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3-4
Understanding the Indicator Lights and Alarm Horn Patterns . . . . . . . . .4
Weekly Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Regular Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
If This Smoke Alarm Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
What To Do In Case Of Fire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Using the Silence Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
If You Suspect a Problem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Recommended Locations For Smoke Alarms . . . . . . . . . . . . . . . . . . . . . .5
Locations To Avoid For Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
About Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Special Compliance Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Limitations of Smoke Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Limited Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
All Rights Reserved. © 2004 BRK Brands, Inc.
BRK Brands Europe Ltd., Gordano Gate, Portishead, Bristol, BS20 7GG, UK
Customer Service Dept.: 01275 845024
E-mail address: sales@firstalert.co.uk
FIRE SAFETY TIPS
Follow safety rules and prevent hazardous situations: 1) Use smoking
materials properly. Never smoke in bed. 2) Keep matches or lighters away
from children; 3) Store flammable materials in proper containers; 4) Keep
electrical appliances in good condition and don t overload electrical circuits; ’
5) Keep cookers, barbecue grills, fireplaces and chimneys grease- and
debris-free; 6) Never leave anything heating on the cooker unattended;
7) Keep portable heaters and open flames, like candles, away from flammable
materials; 8) Don t let rubbish accumulate.’
Keep alarms clean, and test them weekly. Replace alarms immediately if they
are not working properly. Smoke Alarms that do not work cannot alert you to a
fire. Keep at least one working fire extinguisher on every floor, and an addi-
tional one in the kitchen along with a fire blanket. Have fire escape ladders or
other reliable means of escape from an upper floor in case stairs are blocked.
BEFORE YOU INSTALL THIS SMOKE ALARM
IMPORTANT! Read “Recommended Locations for Smoke Alarms” and
“ ”Locations to Avoid for Smoke Alarms before beginning. This unit monitors
the air, and when smoke reaches its sensing chamber, it alarms. It can give
you more time to escape before fire spreads. This unit can ONLY give an
early warning of developing fires if it is installed, maintained and located
where smoke can reach it, and where all residents can hear it, as described
in this manual. This unit will not sense gas, heat, or flame. It cannot prevent
or extinguish fires.
Understand The Different Type of Smoke Alarms
Battery powered or mains powered? Different Smoke Alarms provide
different types of protection. See “About Smoke Alarms for details. ”
Know Where To Install Your Smoke Alarms
Fire Safety Professionals recommend at least one Smoke Alarm on every
level of your home, in every bedroom, and in every bedroom hallway or
separate sleeping area. See Recommended Locations For Smoke“
Alarms” and “Locations To Avoid For Smoke Alarms for details.”
Know What Smoke Alarms Can and Can’t Do
A Smoke Alarm can help alert you to fire, giving you precious time to
escape. It can only sound an alarm once smoke reaches the sensor. See
“ ”Limitations of Smoke Alarms for details.
Check Your Local Building Codes
This Smoke Alarm is designed to be used in a typical single-family residence.
It alone may not meet requirements for boarding houses, sheltered housing,
hotels, motels, hostels, inns or communal escape routes in blocks of flats.
See “Special Compliance Considerations” for details.
1
All BRK®Smoke Alarms conform to regulatory requirements, including
BS5446: Pt. 1:2000 and are designed to detect particles of combustion.
Smoke particles of varying number and size are produced in all fires.
Ionisation technology is generally more sensitive than photoelectric
technology at detecting small particles, which tend to be produced
in greater amounts by flaming fires, which consume combustible
materials rapidly and spread quickly. Sources of these fires may include
paper burning in a wastebasket, or a grease fire in the kitchen.
Photoelectric technology is generally more sensitive than ionisation
technology at detecting large particles, which tend to be produced in
greater amounts by smouldering fires, which may smoulder for hours
before bursting into flame. Sources of these fires may include cigarettes
burning in couches or bedding.
For maximum protection, use both types of Smoke Alarms on each
level and in every bedroom of your home.
USER’S MANUAL
SMOKE ALARMS
ELECTRICAL SHOCK HAZARD. Turn off the power to the area where
the Smoke Alarm is installed before removing it from the mounting
bracket. Failure to turn off the power first may result in serious
electrical shock, injury or death.
•
This unit will not alert hearing impaired residents. It is recommend-
ed that you install special units which use devices like flashing
strobe lights to alert hearing impaired residents.
•
This unit must be powered by a 24-hour, 230VAC
pure sine wave
50Hz circuit. Be sure the circuit cannot be turned off by a switch,
dimmer, or ground fault circuit interrupter. Failure to connect this
unit to a 24-hour circuit may prevent it from providing constant
protection.
•
This Smoke Alarm must have AC or battery power to operate.
If the mains (AC) power fails, battery back-up will allow the alarm to
sound for at least 4 minutes. If mains (AC) power fails and the battery
is weak, protection should last for at least 30 days. If mains (AC)
power fails and the battery is dead or missing, the alarm cannot
operate.
•
Never disconnect the power from a mains (AC) powered unit to stop
an unwanted alarm. Doing so will disable the unit and remove your
protection. In the case of a true unwanted alarm open a window or
fan the smoke away from the unit. The alarm will reset automatically
when it returns to normal operation. Never remove the batteries
from a battery operated unit to stop an unwanted alarm (caused by
cooking smoke, etc.). Instead open a window or fan the smoke
away from the unit. The alarm will reset automatically.
• Do not install the Alarm where it may be exposed to dripping
water or could be splashed.
•
Connect this unit ONLY to other compatible units. See How To“
Install This Smoke Alarm for details. Do not connect it to any other”
type of alarm or auxiliary device. Connecting anything else to this
unit may damage it or prevent it from operating properly.
•
On Model 7010BE Only:
This Smoke Alarm has a battery drawer
which resists closing unless a battery is installed. This warns you
the unit will not operate under DC power without a battery.
• Do not stand too close to the unit when the alarm is sounding.
It is loud to wake you in an emergency. Exposure to the horn at
close range may harm your hearing.
•
Do not paint over the unit. Paint may clog the openings to the
sensing chambers and prevent the unit from operating properly.
AC Powered Photoelectric (Optical)
Smoke Alarm with Battery Back-Up
Model 7010BE
Input: 230V , 50Hz, 0.05A~
AC Powered Photoelectric (Optical)
Smoke Alarm with Lithium Battery
Back-Up
Model 7010LBE
Input: 230V , 50Hz, 0.05A~
BS5446: Pt. 1:2000
Licence No. 7960
US Patent 6,377,182
2
The Mounting Bracket:
To remove the mounting bracket from the Smoke
Alarm base, hold the Smoke Alarm base firmly and
twist the mounting bracket counterclockwise. The
mounting bracket installs onto the junction box. It
has a variety of screw slots to fit most boxes.
The Power Connector:
The power connector plugs into a power input block on the
Smoke Alarm. It supplies the unit with mains (AC) power.
• The brown wire is “hot.”
• The blue wire is neutral.
• The orange wire is used for interconnect.
If you need to remove the power connector, turn
POWER OFF at the mains first. Insert a flat screwdriver
blade between the power connector and the security tab
inside the power input block. Gently pry back the tab and
pull the connector free.
4
5
6
8
9
10
7
3
12
2
The Parts of This Unit
1 Mounting Bracket
2 Mounting Slots
3 Locking Pins (break out of bracket)
4 Hot (Brown) AC Wire
5 Neutral (Blue) AC Wire
6 Interconnect (Orange) Wire
7 Quick-Connect Power Connector
8 Turn this way to remove from bracket
9 Turn this way to attach to bracket
10 Slide-Out Battery Drawer (7010BE)
The basic installation of this Smoke Alarm is similar whether you want to
install one Smoke Alarm, or interconnect more than one Smoke Alarm. If
you are interconnecting more than one Smoke Alarm, you MUST read
“Special Requirements For Interconnected Smoke Alarms below before”
you begin installation.
ELECTRICAL SHOCK HAZARD. Turn off power to the area where you
will install this unit at the circuit breaker or fuse box before beginning
installation. Failure to turn off the power before installation may result in
serious electrical shock, injury or death.
This Smoke Alarm shall not be exposed to dripping or splashing.
1. Install a junction box or a ceiling pattress (BRK Model SMK839 or
SMK839RCB) where you plan to install the Alarm if a box is not already
installed. Use standard 1.5mm2solid copper cable.
2. Remove the mounting bracket from the base. Install the mounting
bracket on the junction box or ceiling pattress using the screw slots
that fit the junction box you are using.
Model 7010BE: Activate the battery back-up by removing the Pull to“
Activate Battery Back-Up tab. Or, install battery back-up. Battery ”
back-up cannot work until you install the battery in the correct position
(Match “ ”+ to “ ”+ and “ ”- to “ ”- ).
Model 7010LBE: Activate the lithium cell by removing the activation
tab. Pull firmly on the tab until it is completely removed. The unit will
sound briefly when the battery is activated. Failure to activate the
Smoke Alarm will remove your protection and invalidate your guarantee.
Alarm may activate for up to 30 seconds.
The lithium cell is protected by a removable tab in the factory to
keep it fresh until the Smoke Alarm is installed. The protective tab
must be removed before installing the Smoke Alarm or the lithium
cell back-up will not operate.
Push and hold test button until the alarm sounds: beep, beep, beep...
3. Plug the power connector into the back of the Smoke Alarm.
4.
Position the base of the Smoke Alarm over the mounting bracket and
turn. The Alarm can be positioned over the bracket every 90°. Turn the
Smoke Alarm clockwise (right) until the unit is in place.
5. Check all connections.
Improper wiring of the power connector or the wiring leading to the
power connector will cause damage to the Alarm and may lead to a
non-functioning Alarm.
ELECTRICAL SHOCK HAZARD. Do not restore power until all Smoke
Alarms are completely installed. Restoring power before installation is
complete may result in serious electrical shock, injury or death.
6. Make sure the Smoke Alarm is receiving mains (AC) power. Under normal
operation, the Green power indicator light will shine continuously.
HOW TO INSTALL THIS SMOKE ALARM
THE PARTS OF THIS SMOKE ALARM
This Smoke Alarm is designed to be mounted on any standard wiring junction box up to a 100mm (4 ) size, on either the ceiling or wall (if allowed by local codes). ”
Read “Recommended Locations For Smoke Alarms” and “Locations to Avoid For Smoke Alarms” before you begin installation.
Tools you will need: Needle-nose pliers or utility knife Standard Flathead screwdriver.••
FOLLOW THESE INSTALLATION STEPS
STAND-ALONE ALARM ONLY:
•Connect the blue wire on the power connector to the neutral wire in
the junction box.
•Connect the brown wire on the power connector to the hot wire in the
junction box.
•Tuck the orange wire inside the junction box. It is used for
interconnect only.
INTERCONNECTED UNITS ONLY:
Strip off about 12 mm (1/2”) of the plastic coating on the orange wire
on the power connector.
•Connect the blue wire on the power connector to the neutral wire in
the junction box.
•Connect the brown wire on the power connector to the hot wire in the
junction box.
•
Connect the orange wire on the power connector to the interconnect
wire in the junction box. Repeat for each unit you are interconnecting.
Never connect the hot or neutral wires in the junction box to the orange
interconnect wire. Never cross hot and neutral wires between Alarms.
STAND-ALONE ALARM ONLY:
•If you are only installing one Smoke Alarm, restore power to the
junction box.
INTERCONNECTED UNITS ONLY:
•If you are interconnecting multiple Smoke Alarms, repeat steps
1-5 for each Smoke Alarm in the series. When you are finished,
restore power to the junction box.
Make sure the Alarm is not receiving excessively noisy power. Examples of noisy power could be major appliances on the same circuit, power from a
generator or solar power, light dimmer on the same circuit or mounted near fluorescent lighting. Excessively noisy power may cause damage to your
Alarm.
7. If the Green power indicator light does not light, TURN OFF POWER TO
THE JUNCTION BOX and recheck all connections. If all connections are
correct and the Green power indicator still does not light when you
restore the power, the unit should be replaced immediately.
8. Test each Smoke Alarm. Press and hold the Test/Silence button until the
unit alarms. When testing a series of interconnected units you must
test each unit individually. Make sure all units alarm when each one
is tested.
If any unit in the series does not alarm, TURN OFF POWER and
recheck connections. If it does not alarm when you restore power, replace it
immediately.

Produkt Specifikationer

Mærke: B/R/K
Kategori: Røgdetektor
Model: 7010BE

Har du brug for hjælp?

Hvis du har brug for hjælp til B/R/K 7010BE stil et spørgsmål nedenfor, og andre brugere vil svare dig


Røgdetektor B/R/K Manualer

B/R/K

B/R/K 7010BE Manual

17 September 2024
B/R/K

B/R/K 9120LBLA Manual

21 August 2024
B/R/K

B/R/K 770MBX Manual

16 August 2024
B/R/K

B/R/K 780MRL Manual

15 August 2024
B/R/K

B/R/K 750MRL Manual

13 August 2024
B/R/K

B/R/K 780MBX Manual

7 August 2024
B/R/K

B/R/K CO850MRLi Manual

1 August 2024
B/R/K

B/R/K CO5120BN Manual

28 Juli 2024
B/R/K

B/R/K CO850MBXi Manual

27 Juli 2024
B/R/K

B/R/K CO850Mi Manual

21 Juli 2024

Røgdetektor Manualer

Nyeste Røgdetektor Manualer

First Alert

First Alert SMICO105-AC Manual

23 Februar 2025
First Alert

First Alert SMICO110 Manual

23 Februar 2025
LogiLink

LogiLink SC0016 Manual

29 Januar 2025
Ei Electronics

Ei Electronics Ei156TLH Manual

14 Januar 2025
FirstAlert

FirstAlert SA700CE Manual

12 Januar 2025
FirstAlert

FirstAlert SA900Si Manual

12 Januar 2025
FireAngel

FireAngel ST-630-DE Manual

30 December 2025
FireAngel

FireAngel W2-Module Manual

30 December 2025
Ei Electronics

Ei Electronics Ei650iW Manual

30 December 2025
GLORIA

GLORIA R-5 Manual

29 December 2024