Brother DCP-L2647DW Manual

Brother Printer DCP-L2647DW

Læs gratis den danske manual til Brother DCP-L2647DW (2 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Brother DCP-L2647DW, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Unpack the machine and check the components

Toner Cartridge and Drum Unit

Assembly

Toner Cartridge Replacement

(MFC-L2820DWXL /

MFC-L2900DWXL only.

Save for later use.)

AC Power Cord

Quick Setup Guide

Product Safety Guide

Remove the packing materials and install the toner cartridge and drum unit assembly

Load paper in the paper tray

Connect the power cord and

turn the machine on

Back Front

NOTE:

Before connecting the power cord, locate the Serial Number

label on the back or side of the machine. Record this number

for product registration and warranty support.

NOTE:

•Manuals in Spanish for this model are available at support.brother.com.

Manuales en Español para este modelo están disponibles en

support.brother.com.

•The components included in the box may differ depending on your country.

•The available connection interfaces vary depending on the model.

If you use a wired connection, you must purchase the correct cable for the

interface you want to use.

• USB cable

We recommend using a USB 2.0 cable (Type A/B) that is no more than

6 feet (2 meters) long.

• Network cable (for wired network models only)

Use a straight-through Category 5 (or greater) twisted-pair cable.

•The screens and images in this show the MFC-L2820DW.Quick Setup Guide

•Save all packing materials and the box in case you must ship your machine.

Select your language (if needed)

For touchscreen models:

1. On the machine’s touchscreen,

press

[Settings] >

[All Settings] >

[Initial Setup] >

[Local Language].

2. Select your language.

3. Press .

Remove the orange part.

Push firmly.

Adjust the paper

guides.

Do not exceed this mark.

For LCD models:

1. Press .Menu

2. Press▲or▼todisplay

[Initial Setup], and then

press .OK

3. Press▲or▼todisplay

[Local Language], and then

press .OK

4. Press▲or▼toselectyour

language, and then press .OK

5. Press .Stop/Exit

Remove the protective tape or film covering the machine and the supplies.

Quick Setup Guide

Read the for the correct installation procedure.Product Safety Guide Quick Setup Guideﬁrst,thenreadthis

Not all models are available in all countries.

The latest manuals are available at the Brother support website:

support.brother.com/manuals

HL-L2465DW / DCP-L2640DW / DCP-L2647DW / DCP-L2660DW /

HL-L2480DW / MFC-L2760DW / MFC-L2807DW / MFC-L2820DW / MFC-L2820DWXL /

MFC-L2880DW / MFC-L2900DW / MFC-L2900DWXL / MFC-L2980DW

D0346C001-00

USA/CAN

Version C

Connect your computer or mobile device to your machine

Follow these steps to complete the setup using one of the connection types available on your machine.

Visit setup.brother.com to download and install

Brother software.

Follow the on-screen

instructions and

prompts.

setup.brother.com

Setup Finished

You can now print and scan

using your machine.

Can’t Connect? Check the following:

Restart your wireless access point

or router. If this is not possible, go

to the next step.

Disconnect the cable.

Wired network

USB connection

If still unsuccessful, go to .

If still unsuccessful, visit support.brother.com

for FAQs and Troubleshooting.

Restart your machine and

computer, and then go to

Manual wireless setup (Wireless models)

Find your SSID (Network Name) and Network

Key (Password) on your wireless access

point or router and write them in the table

provided below.

SSID (Network Name)

Network Key (Password)

If you cannot find this information, ask your

network administrator or wireless access

point or router manufacturer.

SSID: XXXXXXX

Network Key: XXXX

For touchscreen models:

Press

[Find Wi-Fi Network].

Follow the touchscreen

instructions.

Go to to

install software.

If the setup is unsuccessful, restart your

Brother machine and your wireless access

point or router, and repeat

If still unsuccessful, visit

support.brother.com.

•For LCD HL/DCP models:

Press and hold (or press repeatedly)

▲or▼toselectoneofthefollowing

characters:

0123456789abcdefghijklmnopqrstuvwxyz

ABCDEFGHIJKLMNOPQRSTUVWXYZ

(space)!"#$%&'()*+,-./:;<=>?@[\]^_‘{|}~

When the wireless setup is successful, the

touchscreen/LCD displays .[Connected]

Important Notice for Network Security:

The default password to manage this

machine’s settings is located on the back of

the machine and marked “ ”. Pwd

We recommend immediately changing the

default password to protect your machine from

unauthorized access.

If the wireless setup is unsuccessful, set up the connection manually.

NOTE:

•For more information on using the fax feature, see the .Online User’s Guide

•Your machine is programmed to automatically receive faxes. To change this default mode, see the Online User’s Guide.

For LCD models:

A. Set the date and time

Date

1. Press , , , .Menu 0 1 1

2. Enter the date using the dial

pad, and then press to OK

confirm.

1. Last two digits for the year.

2. Two digits for the month.

3. Two digits for the day.

Clock Type

1. Press▲or▼toselect[12h

Clock] [24h Clock] or , and

then press .OK

Configure the machine for faxing

(For MFC models only)

Time

1. Enter the time using the dial

pad, and then press .OK

(12h Clock only)

Press▲or▼toselect[AM] or

[PM], and then press .OK

2. Press .Stop/Exit

B. Set the Station ID

1. Press , , .Menu 0 2

2. Set your fax or telephone

number and your name.

If you do not plan to use the fax feature on this machine, go to step

Wireless network

Connect the telephone line cord

(For MFC models)

If you do not plan to use the fax feature on this

machine, go to step

Before connecting your machine to a 5 GHz Wi-Fi

network,

confirm the channels that your machine supports.

Go to support.brother.com/g/d/a5m6/, select your product,

and then click for more information.Download

For touchscreen models:

A. Set the date and time

Press > [Settings]

[All Settings] >

[Initial Setup] >

[Date & Time], and then set

the date and time you want.

B. Set the Station ID

Press > [Settings]

[All Settings] >

[Initial Setup] >

[Station ID], and then set

your fax or telephone number

and your name.

For LCD models:

Press , and then select Menu

[Network] >

[WLAN(Wi-Fi)] >

[Find Network].

Follow the LCD instructions.

Select the SSID (Network Name) for your

access point or router and enter the Network

Key (Password).

D0346C001-00

Produkt Specifikationer

Mærke:	Brother
Kategori:	Printer
Model:	DCP-L2647DW

Har du brug for hjælp?

Hvis du har brug for hjælp til Brother DCP-L2647DW stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Printer Brother Manualer

Brother DCP-J1800W Manual

17 August 2025

Brother DCP-L2647DW Manual

17 August 2025

Brother HL-L1230W Manual

17 August 2025

Brother DCP-T535DW Manual

13 August 2025

Brother DCP-J1313DW Manual

12 August 2025

Brother MFC-J4555DW Manual

12 August 2025

Brother MFC-J4355DW Manual

12 August 2025

Brother DCP-J1460DW Manual

4 August 2025

Brother HL-L9310CDWTT Manual

2 August 2025

Brother MFC-7480D Manual

2 August 2025

Printer Manualer

Nyeste Printer Manualer

Kyocera TASKalfa 4004i Manual

17 August 2025

Canon PIXMA MegaTank G3200 Manual

16 August 2025

Canon PIXMA MegaTank G5020 Manual

15 August 2025

Ricoh M 320F Manual

15 August 2025

Ricoh IM C7010 Manual

15 August 2025

13 August 2025

13 August 2025

13 August 2025

13 August 2025

Utax P-4026w MFP Manual

13 August 2025