Brother DCP-T583DW Manual

Brother Printer DCP-T583DW

Læs gratis den danske manual til Brother DCP-T583DW (8 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Brother DCP-T583DW, eller vil du spørge andre brugere om produktet?

Side 1/8
1
EN
Quick Setup Guide
DCP-T530DW / DCP-T535DW / DCP-T536DW / DCP-T580DW / DCP-T583DW
DCP-T730DW / DCP-T735DW / DCP-T780DW / DCP-T830DW / DCP-T835DW
MFC-T930DW / MFC-T935DW / MFC-T980DW
D0376R001-00
UK
The latest manuals are available at the Brother
support website: support.brother.com/manuals
Continue to the next column
Read the Product Safety Guide rst, then read this Quick Setup Guide for the correct installation procedure.
a
Unpack the machine and
check the components
Remove the protective tape and the film covering
the machine.
b
Load plain A4 paper in the
paper tray
If you selected [[5-B] Set up from the control panel on the machine] in the printed Quick Setup
Guide included with the machine, go to [5-B].
NOTE
The illustrations in this guide may not match your model
exactly, but the steps are the same for each model. The
above illustration is MFC-T930DW.
The components may differ depending on your country.
Save all packing materials and the box in case you need to
ship your machine.
If you use a wired connection, you must purchase the correct
interface cable for the interface you want to use. (Supported
models only)
USB cable: Use a USB 2.0 cable (Type A/B) that is no more
than 2 metres long (included in some countries).
Ethernet (Network) cable: Use a straight-through Category
5 (or greater) twisted-pair cable for 10BASE-T or
100BASE-TX Fast Ethernet Network (not included).
Brother aims to reduce waste and save both raw materials
and the energy required to produce them. Read more about
our environmental work at
www.brotherearth.com.
Proceed to the next step according to your
model. The model name can be found on
the front of the machine.
DCP-T530DW / DCP-T535DW / DCP-T536DW
DCP-T580DW / DCP-T583DW / DCP-T730DW
DCP-T735DW / DCP-T780DW
«
DCP-T830DW / DCP-T835DW
MFC-T930DW / MFC-T935DW / MFC-T980DW
«
2-A
2-B
2-A
2
Continue to the next column
c
Connect the telephone line
cord (MFC-T930DW /
MFC-T935DW / MFC-T980DW)
Insert the telephone line cord into the socket
marked LINE.
For more information on using the fax feature, see
the Online User's Guide.
d
Connect the power cord
The machine powers on automatically.
(For certain models only) If you are prompted to
select your country or language, follow the LCD
instructions.
2
1
2-B
2
1
Follow this step only for models
MFC-T930DW / MFC-T935DW /
MFC-T980DW and if you are using this
machine as a fax machine.
(For Europe) We can send you a genuine Brother
cord free of charge if you need one. To contact us,
visit www.brother.eu.
(Example for UK)


Produkt Specifikationer

Mærke: Brother
Kategori: Printer
Model: DCP-T583DW

Har du brug for hjælp?

Hvis du har brug for hjælp til Brother DCP-T583DW stil et spørgsmål nedenfor, og andre brugere vil svare dig