Brother HL-L1230W Manual

Brother Printer HL-L1230W

Læs gratis den danske manual til Brother HL-L1230W (2 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Brother HL-L1230W, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Unpack the machine and check the components

Toner Cartridge

A5 Paper Long Edge

Support

Quick Setup Guide

Product Safety Guide

Remove the packing materials and install the toner cartridge

Load paper in the paper tray

Connect the power cord and turn the machine on

Back Front

NOTE:

• The components included in the box may differ depending on your country.

• The available connection interfaces vary depending on the model.

USB cable

We recommend using a USB 2.0 cable (Type A/B) that is no more than

2 metres long.

• The screens and images in this show the HL-L1232W.Quick Setup Guide

• Brother aims to reduce waste and save both raw materials and the energy

required to produce them.

Read more about our environmental work at www.brotherearth.com.

• Save all packing materials and the box in case you need to ship your

machine.

Remove the protective tape or film covering the machine and the supplies.

Adjust the paper guides to fit the

paper being used.

For the long edge of A5 paper

Power Off

Ready

Data Remaining

Sleep

Deep Sleep

Warming Up

Cooling Down

Receiving Data Toner Low Replace Toner Paper Jam

Drum End Soon

Replace Drum

Dimmed 1 second interval 0.5 second interval

Printer LED Indications

Blinking: or ON: OFF:

Make sure the printing

surface is face up.

Quick Setup Guide

Read the for the correct installation procedure.Product Safety Guide Quick Setup Guideﬁrst,thenreadthis

Not all models are available in all countries.

The latest manuals are available on the Brother support website:

support.brother.com/manuals

HL-L1230W / HL-L1232W

D033J1001-00

Version 0

Connect your computer or mobile device to your machine

Follow these steps to complete the setup using one of the connection types available on your machine.

Visit setup.brother.com to download and install

Brother software.

Follow the on-screen

instructions and

prompts.

setup.brother.com

Setup Finished

You can now print using your

machine.

Can’t Connect? Check the following:

Restart your wireless access point

orrouter.Ifthisisnotpossible,go

to the next step.

Disconnect the cable.

USB connection

Ifstillunsuccessful,goto .

Ifstillunsuccessful,visitsupport.brother.com

for FAQs and troubleshooting information.

Restart your machine and

computer,andthengoto

Manual wireless setup (Wireless models)

Go to to install software.

Ifthesetupisunsuccessful,restartyourBrother

machineandyourwirelessaccesspointorrouter,

and repeat

Ifstillunsuccessful,visitsupport.brother.com.

Important Notice for Network Security:

The default password to manage this

machine’s settings is located on the back of

the machine and marked “ ”. Pwd

We recommend immediately changing the

default password to protect your machine from

unauthorised access.

Ifthewirelesssetupisunsuccessful,setuptheconnectionmanually.

Wireless network

Press the WPS button on your wireless LAN access

point or router.

Press and hold the Wi-Fi button on your machine for

about 2 seconds. The Wi-Fi button will light up when

connected.

Fordetailedmachineinformationandproductspecifications,seetheOnline User's Guide at support.brother.com/manuals. ©2024BrotherIndustries,Ltd.Allrightsreserved.

D033J1001-00