Brother ScanNCut CM250 Manual

Brother Papirskærer ScanNCut CM250

Læs gratis den danske manual til Brother ScanNCut CM250 (12 sider) i kategorien Papirskærer. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Brother ScanNCut CM250, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Basic Quilting Guide

– Making a Quilt –

cFabric ............................................... We recommend 100% cotton that is not too thick.

cQuilt batting ..................................... Normally, medium-thick 100% polyester batting is used.

There is also cotton batting.

cThread .............................................. Since there are various types, for example, for piecing, for

quilting, for hand-sewing and for machine-sewing, select

the type appropriate for the desired purpose and use.

cSewing needles/pins.......................... Since there are various types, for example, for piecing

and for quilting, select the type appropriate for the

desired purpose.

cQuilting pencil (erasable pen, etc.) ... Use to copy patterns onto fabric and to draw quilting

lines.

cThimble ............................................ Use to protect your fingers when

quilting.

Place a thimble on the middle

finger of your right hand to push

the needle and on the middle or

index finger of your left hand to

stop the needle.

cQuilting hoop ................................... Use the hoop for quilting with a

cleaner finish.

cThread clipper

cIron/press

cMeasuring stick

1 Preparing Materials and Equipment

Refer to “Cutting Around Drawings” in the Operation Manual to specify a seam

allowance and draw the pattern lines, and then cut out the pieces. Be sure to

observe the following instructions.

1Check the fabric grain (weaving direction).

* When making pieces from patterned fabric,

the pattern has priority over the fabric grain.

* Observe the fabric grain on the pattern if it is

indicated.

2If a seam allowance will be drawn, attach the

fabric with the wrong side facing up.

Align the lengthwise grain with the insertion

direction.

3Select the patterns, and then arrange them.

If the fabric grain and pattern angle are not

aligned, rotate the pattern.

* Pre-installed patterns will automatically be

arranged with their grain along the

lengthwise grain of the fabric.

4Specify the seam allowance.

Widths that can be specified with this

machine: 3 mm, 5mm, 1/4", 7mm, 10mm,

1/2", 5/8"

1Stitching line

2Seam allowance

2 Cutting Pieces (Fabric)

Lengthwise-grain

fabric Hard to stretch

Crosswise-grain

fabric Slightly stretched

Bias-grain fabric Easy to stretch

1Lengthwise-

grain fabric

2Crosswise-

grain fabric

3Bias-grain

fabric

4Selvage

1Standard mat

2High tack adhesive

fabric support sheet

(An additional

purchase may be

required depending

on the machine

model.)

3Wrong side of

fabric

Standard seam allowance

Patchwork 5 mm (3/16"), 1/4", 7 mm

Appliqué 3 mm (1/8"), 5 mm (3/16")

Produkt Specifikationer

Mærke:	Brother
Kategori:	Papirskærer
Model:	ScanNCut CM250

Har du brug for hjælp?

Hvis du har brug for hjælp til Brother ScanNCut CM250 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Papirskærer Brother Manualer

Brother DC100 Manual

14 September 2024

Brother ScanNCut CM350H Manual

25 August 2024

Brother ScanNCut CM100DM Manual

25 August 2024

Brother ScanNCut SDX2240D Manual

25 August 2024

Brother ScanNCut CM650WX Manual

25 August 2024

Brother ScanNCut CM250 Manual

25 August 2024

Brother ScanNCut CM600DX Manual

25 August 2024

Brother ScanNCut SDX330D Manual

24 August 2024

Brother ScanNCut SDX230DX Manual

24 August 2024

Brother ScanNCut SDX230Di Manual

24 August 2024

Papirskærer Manualer

Nyeste Papirskærer Manualer

17 Juni 2025

30 December 2025

22 Oktober 2024

1 Oktober 2024

Fellowes Proton 120 Manual

2 September 2024

Fellowes Atom 150 Manual

2 September 2024

Fellowes Proton 180 Manual

2 September 2024

Fellowes Atom 180 Manual

2 September 2024

Renkforce RF-CUT-100 Manual

1 September 2024

Ideal 1133 Manual

31 August 2024