Brother ScanNCut CM350H Manual

Brother Papirskærer ScanNCut CM350H

Læs gratis den danske manual til Brother ScanNCut CM350H (12 sider) i kategorien Papirskærer. Denne vejledning er vurderet som hjælpsom af 26 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 13.5 anmeldelser. Har du et spørgsmål om Brother ScanNCut CM350H, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
1
Basic Quilting Guide
– Making a Quilt –
cFabric ............................................... We recommend 100% cotton that is not too thick.
cQuilt batting ..................................... Normally, medium-thick 100% polyester batting is used.
There is also cotton batting.
cThread .............................................. Since there are various types, for example, for piecing, for
quilting, for hand-sewing and for machine-sewing, select
the type appropriate for the desired purpose and use.
cSewing needles/pins.......................... Since there are various types, for example, for piecing
and for quilting, select the type appropriate for the
desired purpose.
cQuilting pencil (erasable pen, etc.) ... Use to copy patterns onto fabric and to draw quilting
lines.
cThimble ............................................ Use to protect your fingers when
quilting.
Place a thimble on the middle
finger of your right hand to push
the needle and on the middle or
index finger of your left hand to
stop the needle.
cQuilting hoop ................................... Use the hoop for quilting with a
cleaner finish.
cThread clipper
cIron/press
cMeasuring stick
1 Preparing Materials and Equipment
2
Refer to “Cutting Around Drawings” in the Operation Manual to specify a seam
allowance and draw the pattern lines, and then cut out the pieces. Be sure to
observe the following instructions.
1Check the fabric grain (weaving direction).
* When making pieces from patterned fabric,
the pattern has priority over the fabric grain.
* Observe the fabric grain on the pattern if it is
indicated.
2If a seam allowance will be drawn, attach the
fabric with the wrong side facing up.
Align the lengthwise grain with the insertion
direction.
3Select the patterns, and then arrange them.
If the fabric grain and pattern angle are not
aligned, rotate the pattern.
* Pre-installed patterns will automatically be
arranged with their grain along the
lengthwise grain of the fabric.
4Specify the seam allowance.
Widths that can be specified with this
machine: 3 mm, 5mm, 1/4", 7mm, 10mm,
1/2", 5/8"
1Stitching line
2Seam allowance
2 Cutting Pieces (Fabric)
Lengthwise-grain
fabric Hard to stretch
Crosswise-grain
fabric Slightly stretched
Bias-grain fabric Easy to stretch
1Lengthwise-
grain fabric
2Crosswise-
grain fabric
3Bias-grain
fabric
4Selvage
1Standard mat
2High tack adhesive
fabric support sheet
(An additional
purchase may be
required depending
on the machine
model.)
3Wrong side of
fabric
Standard seam allowance
Patchwork 5 mm (3/16"), 1/4", 7 mm
Appliqué 3 mm (1/8"), 5 mm (3/16")

Produkt Specifikationer

Mærke: Brother
Kategori: Papirskærer
Model: ScanNCut CM350H

Har du brug for hjælp?

Hvis du har brug for hjælp til Brother ScanNCut CM350H stil et spørgsmål nedenfor, og andre brugere vil svare dig


Papirskærer Brother Manualer

Brother

Brother DC100 Manual

14 September 2024
Brother

Brother ScanNCut CM350H Manual

25 August 2024
Brother

Brother ScanNCut CM100DM Manual

25 August 2024
Brother

Brother ScanNCut SDX2240D Manual

25 August 2024
Brother

Brother ScanNCut CM650WX Manual

25 August 2024
Brother

Brother ScanNCut CM250 Manual

25 August 2024
Brother

Brother ScanNCut CM600DX Manual

25 August 2024
Brother

Brother ScanNCut SDX330D Manual

24 August 2024
Brother

Brother ScanNCut SDX230DX Manual

24 August 2024
Brother

Brother ScanNCut SDX230Di Manual

24 August 2024

Papirskærer Manualer

Nyeste Papirskærer Manualer

Genie

Genie GH05 Manual

17 Juni 2025
Ideal

Ideal 3006 Manual

30 December 2025
MBM

MBM 4305 Manual

22 Oktober 2024
Genie

Genie GM A4 Manual

1 Oktober 2024
Fellowes

Fellowes Proton 120 Manual

2 September 2024
Fellowes

Fellowes Atom 150 Manual

2 September 2024
Fellowes

Fellowes Proton 180 Manual

2 September 2024
Fellowes

Fellowes Atom 180 Manual

2 September 2024
Renkforce

Renkforce RF-CUT-100 Manual

1 September 2024
Ideal

Ideal 1133 Manual

31 August 2024