This equipment has been tested and found to comply with the following
European and international Standards ffor Electromagnetic Compatibility and
Electrical Safety:
Radiated Emissions (EU): EN55103-1 (1996)
RF Immunity (EU): EN55103-2 (1996)
Electrical Safety (EU): EN60065 (2002)
Electrical Safety (USA): UL60065 (2003)
Electrical Safety (CAN): CAN/CSA-E60065-00 (2003)
Radiated Emissions (USA): FCC part 15 Class B
Before using the apparatus, read these instructions. Follow all instructions, heed them and keep them in a safe
place.
* Clean only with a dry cloth.
* Do not block any of the ventilation openings. Install in accordance with the manufacurers instructions.
* Do not place objects filled with liquid on this apparatus.
* Do not defeat the safety purpose of the grounding type plug. A grounding plug has two blades and a third
grounding prong. The third prong is provided for your safety. When the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
* Protect the power cord from being walked upon or pinched, particularly at plugs, convenience receptacles
and the point where they exit from the apparatus.
* Only use attachments/accessories specified by the manufacturer.
* Unplug this apparatus during lightning storms or when not in use for a long time.
WARNING - TO REDUCE THE RISK OF FIRE OR SHOCK, DO NOT EXPOSE THIS APPARATUS TO RAIN OR
MOISTURE.
DO NOT REMOVE COVERS. NO USER SERVICEABLE PARTS INSIDE - REFER SERVICING TO QUALIFIED
PERSONNEL.
THIS EQUIPMENT MUST BE EARTHED.
IT SHOULD NOT BE NECESSARY TO REMOVE ANY PROTECTIVE EARTH OR SIGNAL CABLE SHIELD
CONNECTIONS TO PREVENT GROUND LOOPS. ANY SUCH DISCONNECTIONS ARE OUTSIDE THE
RECOMMENDED PRACTICE OF BSS AUDIO AND WILL RENDER THE EMC OR SAFETY CERTIFICATION
VOID.
For continued compliance with international EMC legislation, ensure that all input and output cables are wired
with the cable screen connected to Pin 1 of th XLR connectors and/or the jack plug sleeve. The input XLR Pin
1 and the side-chain input jack socket sleeve are connected to the chassis via a low value capacitor, providing
high immunity from ground loops while ensuring good EMC performance.
Important Safety Information - Read this carefully
