BSS Audio Soundweb 9000 Manual

BSS Audio Ikke kategoriseret Soundweb 9000

Læs gratis den danske manual til BSS Audio Soundweb 9000 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om BSS Audio Soundweb 9000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

105

SoundwebTM

SoundwebSoundweb

SoundwebTMTM

TMTMTM 9000 9000

9000 9000

9000

Installation Guide

106

SoundwebTM

Regulatory Information

An example of this equipment has been tested and found to comply with the following European

and international Standards for Electromagnetic Compatibility and Electrical Safety:

Radiated Emissions (EU): EN55022B (1994)

Immunity (EU): EN50082/1 (1992) RF Immunity, Fast

Transients ESD

Mains Disturbance (EU): EN61000/3/2 (1995)

Electrical Safety (EU): EN60065 (1993)

Radiated Emissions (USA): FCC part 15 Class B

Electrical safety (USA): UL6500

Important safety information - read and follow

Do not remove covers. No user serviceable parts inside, refer servicing to qualified service

personnel. For continued compliance with international EMC regulations, it is important that all

cables be screened, and connected as follows: Control cable screens to the ground screws

adjacent to the connector. Network cables should be of type CAT.5. WARNING: This equipment

must be earthed. It should not be necessary to remove any protective earth or signal cable shield

connections to prevent ground loops. Any such disconnections are outside the recommended

practice of BSS Audio, and will render the EMC or safety certificate void. Do not defeat the safety

purpose of the polarised/grounding plug. A polarised plug has 2 blades, one wider than the other. A

grounding type plug has 2 blades, and a third grounding prong. The third prong is provided for

your safety. When the provided plug does not fit an electrical outlet, consult a qualified electrician.

Mechanical Installation

If the unit is likely to undergo extreme vibration through extensive road trucking and touring, the

unit must be supported at the rear and/or sides to lessen the stress on the front mounting flange.

The necessary support can generally be bought ready-built as a rack tray, or the 9000 unit can be

mounted between other units. Damage caused by insufficient support is not covered by the

warranty. To prevent cosmetic damage to the front panel finish, use protective plastic cups under

the rack mounting bolts.

No-user servicable parts

compartment warning.

Produkt Specifikationer

Mærke:	BSS Audio
Kategori:	Ikke kategoriseret
Model:	Soundweb 9000

Har du brug for hjælp?

Hvis du har brug for hjælp til BSS Audio Soundweb 9000 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret BSS Audio Manualer

BSS Audio DPR-402 Manual

27 August 2024

BSS Audio FDS-310 Manual

27 August 2024

BSS Audio Soundweb 9010 Manual

27 August 2024

BSS Audio MSR-602 Manual

27 August 2024

BSS Audio FCS-966 Manual

27 August 2024

BSS Audio FDS-355 Manual

27 August 2024

BSS Audio DPR-944 Manual

27 August 2024

BSS Audio Soundweb 3088 Manual

27 August 2024

BSS Audio FCS-960 Manual

27 August 2024

BSS Audio DPR-522 Manual

27 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kora DTR-3342 Manual

16 Juni 2025

Playtive IAN 346914 Manual

16 Juni 2025

Playtive IAN 303641 Manual

16 Juni 2025

Playtive HG05107 Manual

16 Juni 2025

Playtive IAN 346906 Manual

16 Juni 2025

Playtive IAN 285778 Manual

16 Juni 2025

Planet Audio PCBLK3.5 Manual

16 Juni 2025

Sabrent NT-UA25 Manual

16 Juni 2025

ElectriQ STRV-Z1-WH Manual

16 Juni 2025

Watts ETX-30 Manual

16 Juni 2025