Cadco Mobileserv SG-4 Manual

Cadco Ikke kategoriseret Mobileserv SG-4

Læs gratis den danske manual til Cadco Mobileserv SG-4 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Cadco Mobileserv SG-4, eller vil du spørge andre brugere om produktet?

Side 1/2
SGJ-2 Sneeze Guard for CBC-HH Series MobileServ
®
Junior Carts
***ALWAYS ATTACH SNEEZE GUARD TO CART BEFORE ATTACHING PAN HOLDERS***
For these models, UNSCREW AND REMOVE the Pan Holder Locking Knobs on Top Cart Surface
before attaching Sneeze Guard.
Line up the holes in the Sneeze Guard legs with the holes for the far left and far right
Pan Holder Locking Knobs on Cart Top Surface.
Then replace and LOOSELY screw the Pan Holder Locking Knobs,
leaving space to slide Pan Holder Keyhole Slots under the Pan Holder Locking Knob heads.
Position Panholders over the Pan Holder Locking Knobs and slide into place. Securely tighten Pan Holder Knobs.
Pan Holder
Locking Knobs
Pan Holder
Locking Knobs
Back of Cart
Front of Cart
Sneeze Guard
Model SG-1 - for 3-Bay/ 6 Pan MobileServ
®
Cart Models
Model SG-4 - for 4-Bay/ 8 Pan MobileServ
®
Cart Models
Model SGJ-2 - for 2-Bay/ 4 Pan CBC-HH Series MobileServ
®
Junior Cart Models
Cadco,
Ltd.
200 International Way, Winsted, CT 06098
860-738-2500
l Fax 860-738-9772
E-mail: info@cadco-ltd.com
l Website: www.cadco-ltd.com
Sneeze Guards for MobileServ
®
Carts
ASSEMBLY INSTRUCTIONS
SG-1 SG-4 SGJ-2
NOTE: For all carts, foods must be pre-heated or pre-chilled (as applicable) to serving temperature
before placing in pans in the cart.
Pan Holder
Locking Knobs
Pan Holder
Locking Knobs
Back of Cart
(3-Bay / 6 Pan model shown)
Front of Cart
Cart Top Surface
Pan Holder
Locking Knobs
Front of Sneeze Guard
Left Keyhole Slot
for all non
CBC-HC models
Left Keyhole Slot for CBC-HC models only
SG-1/ SG-4 Sneeze Guards for 3 & 4 Bay MobileServ
®
Carts
(for attaching to CBC-HC Series Carts with Cambro
®
Camchiller, see next section)
***ALWAYS ATTACH SNEEZE GUARD TO CART BEFORE ATTACHING PAN HOLDERS***
***ALWAYS ATTACH SNEEZE GUARD TO CART BEFORE ATTACHING PAN HOLDERS***
SG-1 Sneeze Guard for CBC-HC Series MobileServ
®
Carts with Camchiller
®
only
Pan Holder
Locking Knobs
Pan Holder
Locking Knobs
Front of Cart
Cart Top Surface
Front of Sneeze Guard
Left Keyhole Slot
for all non
CBC-HC models
Left Keyhole Slot for CBC-HC models only
Pan Holder
Locking Knobs
(*Cold Bay on
CBC-HC
models only)
Back of Cart
(CBC-HC 3-Bay / 6 Pan model shown)
For these models, LOOSEN BUT DO NOT REMOVE the Pan Holder Locking Knobs on Cart Top Surface
before attaching Sneeze Guard. Position the Keyhole Slots on the Sneeze Guard over the Pan Holder Locking Knobs,
slide the Sneeze Guard into place, repeat with all Panholders, and then tighten all Pan Holder Locking Knobs.
Right Keyhole Slot
for all models
Right Keyhole Slot
for all models
For these models, LOOSEN BUT DO NOT REMOVE the Pan Holder Locking Knobs on Cart Top Surface
before attaching Sneeze Guard. Position the Keyhole Slots on the Sneeze Guard
over the Pan Holder Locking Knobs on the Cart Top Surface, slide the Sneeze Guard into place,
repeat with all Panholders, and then tighten all Pan Holder Locking Knobs.
Place pre-frozen Camchiller
®
in bottom of Cold Bay Pan Holder when ready to use. Then position pans in the Pan Holders.


Produkt Specifikationer

Mærke: Cadco
Kategori: Ikke kategoriseret
Model: Mobileserv SG-4

Har du brug for hjælp?

Hvis du har brug for hjælp til Cadco Mobileserv SG-4 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Cadco Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer