Caliber PARK 500 Manual

Caliber Ikke kategoriseret PARK 500

Læs gratis den danske manual til Caliber PARK 500 (11 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Caliber PARK 500, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/11
E N G L I S H
1
PARK 500 PARKING SENSOR SYSTEM
PARK 500 consists of ultrasonic sensors, camera and digital control
box. (Besides these, a outer connected display with RCA plug is
needed).The video signal is inputted into control box via VIN (video
Input) and processed by control box, then outputted to outer
connected display with RCA plug via VOUT (Video Output). This
system detects the distance between the car and back obstruction
by ultrasonic sensors fixed at rear bumper of the car, and the display
shows the back image via the camera fixed at the rear of the car.
With the change of alarm sound, figure or simulation bars as well as
the image, the driver could judge the distance to avoid accident.
INSTALLATION TOOLS
ADVISED POSITION TO INSTAL THE SENSORS
SELECT DRILLING POSITION FOR SENSOR A AND D
A B E C D
Ø 21 mm
for sensor
Ø 25 mm
for camera
A. 4 drilled holes (A, B, C, D) and camera hole
(E) should be under the same line
B. 0.5-0.8m vertically high to the ground, 0.55m
is recommended
C.Vertical, tidy surface without metal
components is preferred.
A. Choose suitable drilling position for A and D
sensor with relevant mark
E N G L I S H
2
SELECT DRILLING POSITION FOR SENSOR AND CAMERA B,C AND E
DRILLING
SENSOR AND CAMERA INSTALLATION
B.To perform the best detecting angle, select the
position for A and D sensor with 8-13cm away
from the side, 11cm is recommended, and 20°
with the side.
A.Measure the distance between sensor A and D,
get the result “L”.
B.Mark sensor B, C and E for every 1/4 “L”
interval. (Camera E should be in the middle of
the bumper)
A.Firstly, use a small driller tip to locate.
B.Drill with the original driller. Ø21MM
DRILLER FOR SENSOR HOLES AND
Ø25MM DRILLER FOR CAMERA HOLE.
A.Insert the sensors and camera into the holes
one by one and tighten them, the sensor with
metal slice must be up and down fixed instead
of right and left.The camera must be fixed with
the triangle mark upward.
B.Hide the wires in good order according to
various cars.

Produkt Specifikationer

Mærke: Caliber
Kategori: Ikke kategoriseret
Model: PARK 500

Har du brug for hjælp?

Hvis du har brug for hjælp til Caliber PARK 500 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Caliber Manualer

Caliber

Caliber PS 20 Manual

2 September 2024
Caliber

Caliber CALNAV Manual

26 August 2024
Caliber

Caliber MCD 770 Manual

25 August 2024
Caliber

Caliber PS 10 Manual

24 August 2024
Caliber

Caliber RDD788 Manual

13 August 2024
Caliber

Caliber PS 612 Manual

13 August 2024
Caliber

Caliber RCD 232MBT Manual

11 August 2024
Caliber

Caliber CAM 201 Manual

11 August 2024
Caliber

Caliber RCD 110 Manual

7 August 2024
Caliber

Caliber HWC 201PT Manual

6 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Rowenta

Rowenta Excel Comfort Eco Safe SO9275 Manual

1 Juli 2025
Rowenta

Rowenta Silence Soft EP5615 Manual

1 Juli 2025
Megasat

Megasat Camper Connected 5G Manual

1 Juli 2025
Rowenta

Rowenta Moveling CV4025 Manual

1 Juli 2025
Rowenta

Rowenta Actisteam DZ2110 Manual

1 Juli 2025
Rowenta

Rowenta Plastic Inox 3 LA5200 Manual

1 Juli 2025
Rowenta

Rowenta Pure Collection CF8213 Manual

1 Juli 2025
Rowenta

Rowenta Autosteam DW4130 Manual

1 Juli 2025
Rowenta

Rowenta CF7550 Manual

1 Juli 2025
Rowenta

Rowenta Professional DX8210 Manual

1 Juli 2025