
5
21
4 6
3
User ManUal
3
YEAR WARRANTY
PRoducEd IN
chINA FoR
ALdI SToRES LTd.
PO BOx 26,
AtherstOne,
WArWickshire,
cV9 2sh
ALdI SToRES (IRELANd) LTd.
PO BOx 726,
nAAs,
cO. kildAre
Visit us At WWW.Aldi.cOm
Made in China
After sAles suPPOrt 858191
GB
01827 438 013
serVice-uk@PrOtel-serVice.cOm
IE
0124 695 20
serVice-uk@PrOtel-serVice.cOm
mOdel: kWl-1 04/2026
OriginAl instructiOn mAnuAl
Great care has gone into the manufacture of this product and it should therefore provide you with years
of good service when used properly.
In the event of product failure within its intended use over the course of the first 3 years after date of
purchase, we will remedy the problem as quickly as possible once it has been brought to our attention.
In the unlikely event of such an occurrence, or if you require any information about the product, please
contact us via our helpline support services, details of which are to be found both in this manual and on
the product itself.
V01⁄0025
Kids Wood Wall laMp
NOTE! RISK OF DAMAGE!
» Danger of product damage due to improper placement/use.
• If you notice any damage from transportation, contact the service immediately.
• Under the environment with electrostatic discharge (ESD), the product may malfunction and may require a reset by the user to function
properly again.
5 PRoducT ovERvIEW
Body
Battery compartment
LED strip
Battery compartment cover
Mounting bracket
Pull cord
Battery switch (ON/OFF)
Batteries (2 × AA / LR06)
ON OFF
1.5V “AA”
1.5V “AA”
MADE IN CHINA
OPEN
T55
1E4
2 2A
250V
OJ-200
®
ON OFF
2
3
4
6
8
7
5
1
4.2 exPlAnAtiOn Of symBOls
The following symbols are used in this manual, on the product, or on the packaging.
Read the manual carefully before you use the product.
Products marked with this symbol comply with all applicable EU regulations for the European Economic
Area.
Products marked with this symbol are operated with direct current (DC).
Use the product only in dry indoor environments.
Products marked with this symbol comply with protection class III.
This symbol provides you with useful additional information for assembly or operation.
3 Years warranty
Recycle
Sort and dispose of the packaging materials according to their type, utilizing your local recycling facilities
for paper, cardboard, and light packaging.
4.3 generAl sAfety instructiOns
WARNING! RISK OF ELECTRIC SHOCK!
» Improper use of the product may result in an increased risk of injury.
• Do not operate the product if it shows visible damage or if the batteries have leaked.
• If the product is damaged, it must be replaced by the manufacturer, its customer service, or a similarly qualified person.
• Do not open the casing; leave repairs to professionals. Contact a specialized workshop for this purpose. Liability and warranty claims are
excluded for repairs carried out independently, improper connections, or incorrect operation.
• Do not immerse the product in water or other liquids.
• Never touch the product with wet hands.
• Keep the product away from open flames and hot surfaces.
• Use the product only indoors. Never operate the product in damp rooms or in the rain.
• Never store the product where it can fall into a bathtub or sink.
• Ensure that children do not insert objects into the product.
• If you notice smoke or burning smell, turn off the light immediately.
• If the cord or product shows signs of damage, discontinue use immediately.
• When not in use, when cleaning, or if a malfunction occurs, always turn off the product and remove the batteries.
6 oPERATIoN
6.1 BefOre first use
1. Unpack the product and remove all packaging materials.
2. Ensure that the LED , battery compartment , and pull cord are free from damage before use.
3. Read all safety instructions before operating the product.
4. Insert the batteries into the battery compartment . Ensure correct polarity (+/–).
6.2 sWitching On And Off
NOTE
» Always operate the pull cord carefully to avoid damage.
1. Set the battery switch on the back of the product to the ON position.
2. To switch on the light, gently pull the cord once.
3. To switch off the light, pull the cord again.
4. When the product will not be used for an extended period, set the battery switch to OFF to prevent unnecessary battery discharge.
6.3 mOunting
• The product can be mounted on the wall using the designated mounting braket on the back of the product. Ensure it is securely fastened
before use.
1. Choose a suitable location
• Ensure the wall material (e.g., wood, drywall, masonry) can safely support the weight of the product.
2. Mark the drill holes
• Hold the product against the wall at the desired height and use a pencil to mark the position of the mounting bracket .
3. Drill the holes and prepare them
• Drill two holes at the marked positions. Insert suitable wall plugs flush with the wall surface.
• Always select drill bits, wall plugs, and screws appropriate for your wall type.
• For masonry or concrete walls, use suitable wall plugs.
4. Fix the screws.
• Insert the screws into the wall plugs, leaving the screw heads protruding slightly so the mounting bracket can hook onto them.
5. Mount the product and check stability
• Align the mounting bracket on the back of the product with the screws, carefully hang the product, and ensure brackets are securely
hooked.
• Gently pull downwards to confirm the product is firmly mounted and stable.
NOTE
» Do not cover the product or place objects on top of the LED strip to avoid overheating.
WARNING! RISK OF INJURY! INSTRUCTIONS FOR CHILDREN SAFETY
» Hazards to children and persons with reduced physical, sensory, or mental capabilities (e.g., partially disabled persons, elderly persons
with limited physical and mental capabilities) or lack of experience and knowledge (e.g., older children).
• This product can be used by children aged eight years and above, as well as by persons with reduced physical, sensory, or mental abilities
or lack of experience and knowledge, provided they are supervised or instructed regarding the safe use of the product and understand the
resulting dangers.
• Children must not play with the product. Cleaning and user maintenance must not be carried out by children without supervision.
• Keep children younger than eight years away from the product.
• Do not allow children to play with the packaging film. Children can get caught in it while playing and suffocate.
WARNING! RISK OF DAMAGE AND INJURY!
» Improper handling of the product can result in injury.
• Always place and mount the product on flat surfaces to prevent it from falling over.
• Ensure product is securely mounted on the wall before use.
• Never place the product on or near hot surfaces (e.g., stovetops, etc.).
• Never expose the product to high temperatures (heating, etc.) or weather conditions (rain, etc.).
• Never pour liquid into the product.
• Do not make any modifications to the product. Use the product only as recommended by the manufacturer.
• Do not drop the product, do not hit it, and do not expose it to strong vibrations or magnetic fields.
CAUTION! SAFETY INSTRUCTIONS FOR BATTERY
» Improper replacement of the battery poses a risk of explosion. Replace only with the same or an equivalent battery type.
• Never throw batteries into a fire, and do not expose batteries to fire, sunlight, or other heat sources.
• Keep batteries away from children. If you suspect that a child has swallowed a battery, seek medical attention immediately.
• Store batteries in a manner that makes them inaccessible to children and animals.
• Before disposal, batteries must first be removed and disposed of separately from the product.
• Always replace the battery with one of the same type.
• Do not reuse damaged or leaking batteries.
• If battery leakage occurs, avoid contact with skin, eyes, and clothing.
• If contact happens, immediately rinse the affected area with plenty of clean water and seek medical advice if necessary.
• Keep leaking batteries away from children and pets.
• Check the required battery type and quantity (as specified in this user manual).
• Do not mix old and new batteries or different types/chemistries.
• Do not use rechargeable batteries.
• Exhausted batteries are to be removed from the product.
• Follow the safety, usage, and disposal instructions provided by the battery manufacturer.
• Old or discharged batteries must be disposed of properly or recycled in accordance with all applicable laws.
NOTE RISK OF DAMAGE!
» Improper handling of the product may result in damage to the product.
• Never immerse the product in water for cleaning and do not use a steam cleaner for cleaning. This could damage the product.
• Protect the product from moisture, water droplets, and splashing water.
• Please note that high humidity can promote the growth of biological organisms in the environment.
• This product is intended exclusively for use in private households or comparable areas of use and is not suitable for commercial use.
• The product is only designed for use in closed rooms.
6.4 rePlAcing the BAtteries
• When the light becomes dim or flickers, replace the batteries with new ones of the type specified in this manual.
1. Always switch off the product by pull the cord to turn the light off and set the battery switch to OFF position.
2. Remove the product from the wall. Place it on a flat, stable surface. Ensure hands are clean and dry.
3. Open the battery compartment . Slide the Battery compartment cover and open the cover. Do not use metal tools.
4. Remove used batteries .
5. Insert new batteries . Ensure correct polarity marks (+/–) inside the compartment .
6. Ensure proper seating. Press the batteries gently into place so the contacts and springs are fully engaged. Do not force.
7. Close the compartment . Align the cover , press down until it clicks, and ensure no cables or parts are pinched.
8. Re-mount the product securely
WARNING!
» Inspect the compartment for leakage or corrosion. If leakage is present, avoid skin contact and wipe carefully with a dry, soft cloth. If
corrosion is severe, contact customer service.
» Dispose of used batteries according to local regulations (see Disposal section).
7 cLEANINg ANd MAINTENANcE
WARNING! RISK OF ELECTRIC SHOCK AND DAMAGE!
» Always switch off the product using the battery switch and remove the batteries before cleaning.
» Never immerse the product in water or rinse it under running water, as it can lead to electric shock or product damage.
• Do not use water, liquid cleaners, or sprays directly on the product.
• Do not use aggressive cleaning agents, chemical solvents, brushes with metal or nylon bristles, or sharp/metallic objects (e.g., knives, hard
scrapers). These can damage the surfaces and the wood finish.
NOTE!
» Keep out of reach of very young children during cleaning and maintenance.
• Clean the wooden surface with a soft, dry cloth. If necessary, use a slightly damp cloth and wipe dry immediately.
• Keep the product free of dust, especially around the battery compartment and LED strip.
• Check the pull cord regularly to ensure it works properly.
• Replace the batteries when the light becomes dim. Always use the type specified in this manual.
8 SToRAgE
1. Switch off the product and remove the batteries before storage.
2. Store the product in a clean, dry, and well-ventilated place.
3. Do not place heavy objects on top of the product during storage.
4. Keep out of reach of children when not in use.
1 ScoPE oF dELIvERY
Please check the completeness of the delivery and notify us within 14 days of purchase if the delivery is incomplete. The package you purchased
should contain the following items:
1. Kids Wood Wall Lamp KWL-1
2. 2x AA (LR06) Batteries
3. User Manual
2 gENERAL INFoRMATIoN
This operating manual belongs to this product. It is part of the product and contains important information about commissioning,
handling and disposal. Read the operating instructions carefully, especially the safety instructions, before using the product.Failure
to follow these operating instructions may result in damage to the product or people. The operating instructions are based on the
standards and rules applicable in the European Union. Please also note country-specific guidelines and laws when abroad! Keep the
operating instructions for further use. If you pass the product on to third parties, be sure to include these operating instructions.
3 INTENdEd uSE
This product is designed for indoor lighting and to create a pleasant ambiance in homes, children’s rooms, and other indoor environments. The
product is intended exclusively for private household use. The product is not a toy for children. Only use the product as described in this instruction
manual. Any other use is considered improper and may result in property damage or personal injury. The manufacturer or dealer assumes no
liability for damage caused by improper or incorrect use or for unauthorized changes.
4 SAFETY
4.1 exPlAnAtiOn Of signAl WOrds
The following signal words are used in this manual, on the product, and/or on the packaging.
DANGER!
» This signal word indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING!
» This signal word indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION!
» This signal word indicates a hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION!
» This signal word also indicates a hazardous situation which, if not avoided, may result in property damage.
NOTICE
» This signal word is used to highlight helpful tips and best practices that are not related to personal injury.