Celly GHOSTSUPERMAGCH Manual

Celly Batterioplader GHOSTSUPERMAGCH

Læs gratis den danske manual til Celly GHOSTSUPERMAGCH (32 sider) i kategorien Batterioplader. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Celly GHOSTSUPERMAGCH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/32

Please read this manual and

pay attention to the safety

warnings before using the

product. Keep the manual

to have the possibility to consult it at

a later time, or in case of passing the

product to a third party. Esprinet S.p.A.

can not in any way be held responsible

for injury or damage caused to people or

things resulting from improper use of the

product.

Safety notes

Connect the product only indoors and

compatible USB power supplies (DC 5V /

9V / 12V, 2A)

Connect the product only to an easily

accessible outlet, so that you can quickly

disconnect them from the power supply in

the event of a problem.

Do not use the product if it is damaged.

Never touch the product with wet or damp

hands.

Use the product indoors only.

Do not use in humid environments or in

the rain.

Never insert metallic objects such as keys

or metal clips into the openings of the

product.

To avoid malfunction or damage to the

product, avoid accidental drops, crush,

puncture, or exert a high level of pressure

on the product.

Keep away from moisture, water or other

liquids. If the product comes into contact

with water, moisture or other liquids, do

not use it to avoid electric

shock or damage. Do not store or expose

the product to any heat source, direct

sunlight, radiators, stoves, or other

heat sources such as the dashboard of

your car in the summer. Never use the

product unsupervised. During operation,

the product may become hot. Never use

the product when moving from a cold to

a warm environment. Condensation may

form and, in some cases, damage the

product. Allow the product to reach room

temperature before plugging it back in and

using it again.

is could take several hours.

Usage temperature: 0-35 ° C.

Do not attempt to modify, repair or

disassemble the product.

Do not use a damaged product.

Never use aggressive detergents, alcohol

or other chemical solutions for cleaning as

they could damage the housing or even

compromise its use.

Cleaning the product.

Disconnect all connected cables before

starting cleaning. Do not immerse the

product in water or other liquids.

ere are no replaceable parts inside the

product. Never open and / or disassemble

it. Keep the product out of the reach of

children. Do not allow children or persons

with disabilities to use electrical products

unsupervised. Make sure children do not

play with the wrap. ese could swallow

it and choke.

Use

1. Before charging the device, make sure

that its technical characteristics (voltage,

output and amperage) are compatible with

the charger.

2. Connect the supplied cable to a USB

power supply with compatible output (DC

5V / 9V / 12V, 2A) and to the wireless

charger.

3. Place the wireless charging and

magnetic alignment compatible device,

make sure it is in the correct and stable

position; to ﬁnd out the charging status,

check the charging icon displayed on the

device screen.

4. If you are having problems with

charging, the possible reasons are as

follows:

• Too high or low voltage

• Too high or low current

• Overheating

• Foreign object

• Distance too high

5. With the device fully charged, remove it

from the wireless charger.

6. Disconnect the charger from the power

source after use.

Cleaning

Disconnect all cables before cleaning. If

necessary, clean the holder with a damp

cloth and allow it to dry completely before

use.

Use a clean brush with soft, long bristles

to remove dust from the connectors. Do

not use solvents, corrosive agents or

gaseous cleaners. Make sure that water

or other liquids do not enter the housing.

Storage

Store the charger in a clean and dry area.

Keep away from direct sunlight.

Product disposal (applicable in

countries with separate collection

systems for recyclable materials)

Old products cannot be disposed of in

household waste! If the product is no

longer able to be used at a certain time,

dispose of it according to the regulations

in force in your country. is ensures

that old products are professionally

recycled and that it also excludes negative

consequences for the environment. For

this reason, electrical equipment is marked

with the symbol shown here.

Technical speciﬁcations

Input: DC 5V / 2A, 9V / 2A, 12V / 2A

Output: 5W / 7.5W/10W / 15W

Maximum output power: 15W

Maximum Magnetic H ﬁeld strenght:

<5A/m at 20 cm

Frequency: 110-205KHz

is product complies with the

RoHS directive 2011/65 / EU -

2015/863 / EU. e product is

CE marked and complies with the safety

standards established by the European

Union.Hereby, Esprinet SpA declares that

the product complies with Directive

2014/53 / EU. e full text of the EU

declaration of conformity is available at

the following Internet address: www.celly.

com/exchange/CELLY-SPA/Dichiarazioni_

di_conformita/GHOST SUPERMAGCH/

DOC.pdf

Celly® is a trademark owned by Esprinet

S.p.A.

All brands are registered trademarks of

their respective owners.

Esprinet S.p.A., via Energy Park

20, 20871 Vimercate (MB) -

Italy

Made in China.

Instruction manual

WIRELESS CHARGER

Model: GHOSTSUPERMAGCH

Rev00 - 09.01.2023

Produkt Specifikationer

Mærke:	Celly
Kategori:	Batterioplader
Model:	GHOSTSUPERMAGCH
Type:	Passiv holder
Bredde:	60 mm
Dybde:	82 mm
Højde:	80 mm
Vægt:	61 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Pakketype:	Kasse
Materiale:	Plast
Normal brug:	Bil
Hurtig opladning:	Ja
Trådløs opladning:	Ja
Kapabilitet:	iPhone
Indbygget oplader:	Ja
Mobil enhedstype:	Mobiltelefon/Smartphone
Orientering:	Lodret
Beslagtype til enhed:	Biludluftningsbeslag