Celly PBC5000 Manual

Celly PowerBank PBC5000

Læs gratis den danske manual til Celly PBC5000 (18 sider) i kategorien PowerBank. Denne vejledning er vurderet som hjælpsom af 56 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 28.5 anmeldelser. Har du et spørgsmål om Celly PBC5000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/18

Please read this manual and

pay attention to the safety

warnings before using the

product

Keep the manual to have the possibility

to consult it at a later time, or in case of

passing the product to a third party.

Esprinet S.p.A. can not in any way be held

responsible for injury or damage caused to

people or things resulting from improper

use of the product.

Safety notes

To avoid malfunction or damage to the

product, avoid accidental drops, crush,

puncture or exert a high level of pressure

on the product. is could cause an

internal short circuit and / or overheating.

Keep away from moisture, water or other

liquids. If the product comes into contact

with water, moisture or other liquids,

do not use the product to avoid electric

shock, explosion or damage.

If the product gets wet, even if it dries and

operates normally, the battery contacts

and circuitry may slowly corrode and pose

a safety hazard.

Do not store or expose the product to

any heat source, direct sunlight, radiators,

stoves or other heat sources such as the

dashboard of your car in the summertime.

is could cause the battery to explode or

aﬀect performance. Never use the product

unsupervised.

During operation, the case will become

hot. Allow adequate ventilation. e

casing must never be covered.

Never use the product when moving

from a cold to a warm environment.

Condensation may form which, in some

cases, could damage the product.

Allow the product to reach room

temperature before plugging it back in and

using it again.

is could take several hours.

Usage temperature: 0-40 ° C.

Do not attempt to modify, repair

or disassemble the product. Risk of

explosion!

Do not leave the product in contact with

metal objects.

Metallic objects can interfere with

the electrical connections causing the

protection circuit to malfunction.

Stop using the product immediately if you

notice any swelling, dispersion or other

abnormality.

Do not use a damaged product.

Make sure that the cable provided for

charging the product is intact and does not

short circuit the charging ports.

A non-replaceable rechargeable battery

is built into the product, never open or

disassemble the product. Do not short-

circuit the battery contacts / terminals.

Do not dispose of the product in open

ﬂames. Danger of explosion and ﬁre!

Charge the battery regularly, even when

the product is not in use. is will extend

its life (at least once every 2 months)

Never charge the product when

unattended. While charging, place the

product on a heat-resistant surface. Heat

build-up is normal when charging.

Under no circumstances use aggressive

cleaning agents, alcohol or other chemical

solutions for cleaning as they could

damage the housing or even compromise

the functionality of the product.

Disconnect all connected cables before

starting cleaning. Do not immerse the

product in water or other liquids.

Do not press too hard on the housing to

avoid scratches and damage. Keep the

product out of the reach of children. Never

allow children or people with disabilities to

use electrical products unsupervised.

Make sure children do not play with

the plastic wrap. ey could swallow

fragments and choke.

Charging th

power bank

1. Insert the smaller end of the charging

cable into the port of the power bank.

2. Plug the other end of the charging cable

into the USB port of a charging socket

or computer. Charging of the power bank

will start. It is recommended to charge

12 hours for the ﬁrst charge cycle. While

charging, a white light will ﬂash. When

charging is complete, the white light

will stop ﬂashing and stay on. e time

required for charging is 3 hours.

3. Disconnect the charging cable from the

power bank after charging.

Loading devices

1. Make sure the power bank is suﬃciently

charged.

2. Before charging the device, make sure

that the technical characteristics (Voltage,

output and amperage) are compatible with

the powerbank.

3. Connect the device to the integrated

USB-C port of the powerbank. Charging of

the device will start.

4. Disconnect the device from the power

bank after charging.

Cleaning

Disconnect all cables before cleaning.

If necessary, clean the power bank with a

damp cloth and allow it to dry completely

before use.

Use a clean brush with soft, long bristles

to remove dust from the connectors.

Do not use solvents, corrosive agents or

gaseous cleaners.

Make sure that water or other liquids do

not enter the housing.

Storage

Store the power bank in a clean and dry

area.

Keep away from direct sunlight.

User information for proper

disposal (Directive 2013/56 / EU)

e crossed-out bin symbol shown

on the equipment or on its packaging

indicates that the product at the end of

its useful life, including the non-removable

battery, must be collected separately

from other waste to allow for proper

treatment and recycling. e safe use of

this product is guaranteed in compliance

with the following instructions, therefore

it is necessary to keep them and follow

them scrupulously throughout the life

of the product. e product does not

require technical maintenance, NEVER

DISASSEMBLE IT. e battery inside is

integrated and not replaceable. Do not

attempt to remove the built-in Lithium

Ion / Polymer battery yourself as it

may cause overheating, ﬁre and injury.

e battery should only be removed by

independent qualiﬁed professionals who

are able to remove it safely and disposed

of in accordance with applicable laws. e

user must therefore give the equipment

at the end of its life free of charge to

the appropriate municipal centers for

the separate collection of electrical and

electronic waste, or return it to the

retailer, on a one-by-one basis, or free

of charge for appliances with smaller

external dimensions to 25 cm. Adequate

separate collection for the subsequent

sending of the decommissioned

equipment for recycling, treatment and

environmentally compatible disposal helps

to avoid possible negative eﬀects on the

environment and health and favors the

reuse and / or recycling of the materials

of which it is composed the equipment.

Illegal disposal of equipment, batteries

and accumulators by the user involves the

application of the penalties provided for in

the current legislation.

Technical speciﬁcations

Capacity: 5000mAh

Input USBC: DC 5V/2A

Output USBC: DC 5V/2.1A/10.5W

Size: 7,8 x 4,5 x 2,7 cm

Weight: 89 g

is product complies with RoHS

2011/65 / EU - 2015/863 / EU.

e product is marked with the

CE mark and complies with the safety

standards established by the European

Union.

Celly® is a trademark owned by Esprinet

S.p.A.

All brands are registered trademarks of

their respective owners.

Esprinet S.p.A., via Energy Park

20, 20871 Vimercate (MB) -

Italy

Made in China.

Instruction manual

PORTABLE CHARGER

Model: PBC5000

Rev00 - 28.11.2023

Produkt Specifikationer

Mærke:	Celly
Kategori:	PowerBank
Model:	PBC5000
Bredde:	45 mm
Dybde:	27 mm
Højde:	78 mm
Vægt:	89 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Batterikapacitet:	5000 mAh
Husmateriale:	Plast
Pakketype:	Hængende boks
Certificering:	CE
LED-indikatorer:	Ja
Udgangsspænding:	5 V
Udgangsstrøm:	2.1 A
Bæredygtighedscertifikater:	CE
Indgangsspænding:	5 V
Opladningskilde:	USB
Bærehåndtag:	Ingen
Antal enheder der er tilsluttet samtidigt (maks.):	1
Oplader, kompabilitet:	Mobiltelefon/Smartphone
Inputgrænseflade:	USB Type-C
Indgangsstrøm:	2 A
USB Type-C stik:	Ja
Indbygget spejl:	Ingen