Celly SPEAKERBIKEBK Manual

Celly Højttaler SPEAKERBIKEBK

Læs gratis den danske manual til Celly SPEAKERBIKEBK (30 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Celly SPEAKERBIKEBK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/30

Read this user manual and

especially the safety notes

before using the product. Keep

the user manual for future

reference and include it when passing the

product to a third party. Esprinet S.p.A. will

not be held responsible in any way for injuries

or damage caused to persons or property

resulting from improper use of the product.

Notes on safety

Do not use the product if it is damaged.

Never touch the product with wet or damp

hands.

Avoid listening at volumes that are too

high, especially for prolonged periods while

using the product; use at high volume could

prevent listening to external noises or create

distractions that are dangerous for safety.

If you use the product at an excessive volume,

it could permanently damage your hearing.

Listen at a moderate volume.

Also observe the laws and regulations of the

country in which you use the product.

Do not use in humid environments or in the

rain.

Do not insert metal objects such as keys or

paper clips into the product openings.

To prevent malfunction or damage to the

product, avoid accidental falls, do not crush,

puncture or exert a high level of pressure on

the product.

Keep away from moisture, water or other

liquids. If the product comes into contact with

water, moisture or other liquids, do not use it

to avoid electric shock or damage.

Do not store or expose the product to heat

sources, direct sunlight, radiators, stoves or

other heat sources such as the car dashboard

in summer.

Never use the product unsupervised. During

operation, the housing may overheat. Do not

cover the product during use.

Never use the product when changing from

a cold to a warm environment. Condensation

may occur and, in some cases, damage the

product.

Allow the product to reach room temperature

before connecting and using it again. It may

take several hours.

Usage temperature: 0–40 ° C.

Do not attempt to modify, repair or

disassemble the product.

Do not use a damaged product.

Never use aggressive detergents, alcohol or

other chemical solutions for cleaning as they

can damage the housing or even compromise

the functionality of the product.

Disconnect all connected cables before

starting cleaning. Do not immerse the product

in water or other liquids.

ere are no serviceable parts inside the

product. Never open / disassemble it.

Always turn oﬀ the LED light when not in use.

NEVER look directly into the LED light or point

it into someone's eyes when it is on.

Keep the product out of the reach of

children. Do not allow children or people with

disabilities to use electrical products without

supervision. Make sure children do not play

with the plastic wrap. ey could swallow it

while playing and choke.

Warnings

1. e outlet must be installed close to the

equipment and easily accessible. Keep out of

reach of children. Do not open or damage the

device. Keep away from water and heat.

2. Check the output of the USB charger you

will be using and make sure it is safe before

connecting it to the product. Do not use

this product with a damaged adapter or a

damaged cable.

3. is product may turn on or oﬀ under strong

electromagnetic waves.

4. e light source of this product cannot be

replaced, when the light source ends its life

cycle, the whole product should be replaced.

Reload

For the ﬁrst use, charge the device until it is

fully charged. To recharge the product, use

the micro USB charging cable included in the

package. Insert the smaller end of the cable

into the product's microUSB port.

Connect the larger end of the cable to a

USB port (DC 5V, 1A) of a charging socket

or a personal computer. e ﬂashing red light

indicates that the product is in the charging

state, when the light remains on the device

will be fully charged.

Loading devices

Make sure the product is suﬃciently charged.

Before charging your device, make sure that

the technical characteristics (voltage and

current) are compatible with the product.

Connect the device to the USB port of the

product using the original cable that came

with your device. Charging of the device will

start.

Disconnect the device cable from the product

and your smartphone after charging

Pairing

Place the speaker and the pairing device

within 1 meter of each other. Turn on the

product by pressing and holding the power

button for about 3 seconds. Activate the

WIRELESS function of the device you intend

to pair. Search for the device from WIRELESS

menu and select "SPEAKERBIKE" to start the

connection. If prompted for a password, enter

"0000".

It is also possible to insert a microSD card

(Transﬂash) and play the songs contained

inside.

Automatic reconnection

Once the product and the pairing device have

been paired, they will automatically reconnect

if they are within a short distance of each

other and the wireless function of the pairing

device is activated.

Multifunction buttons: Cleaning

Disconnect all cables before cleaning. If

necessary, clean the product with a damp

cloth and allow it to dry completely before

use. Use a clean brush with soft, long bristles

to remove dust from the connectors. Do not

use solvents, corrosive or gaseous detergents.

Make sure that no water or other liquids enter

the housing.

storage

Store the product in a clean and dry area. Keep

it away from direct sunlight.

CUSTOMER’S INFORMATION FOR

RIGHT WASTE OF THIS PRODUCT

(Directive 2013/56/EU)

e crossed-out bin symbol shown on the

equipment or on its packaging indicates

that the product at the end of its useful life,

including the non-removable battery, must

be collected separately from other waste

to allow for proper treatment and recycling.

e safe use of this product is guaranteed in

compliance with the following instructions,

therefore it is necessary to keep them and

follow them scrupulously throughout the

life of the product. e product does not

require technical maintenance, NEVER

DISASSEMBLE IT. e battery inside is

integrated and not replaceable. Do not

try to remove the built-in Lithium Ion /

Polymer battery yourself as it may cause

overheating, ﬁre and injury. e battery should

only be removed by independent qualiﬁed

professionals who are able to remove it

safely and disposed of in accordance with

applicable laws. e user must, therefore,

give the equipment at the end of its life free

of charge to the appropriate municipal centers

for the separate collection of electrical and

electronic waste, or return it to the retailer,

on a one-by-one basis, or free of charge for

appliances with smaller external dimensions.

to 25 cm. Adequate separate collection for the

subsequent sending of the decommissioned

equipment for recycling, treatment and

environmentally compatible disposal helps

to avoid possible negative eﬀects on the

environment and health and favors the reuse

and / or recycling of the materials of which it

is composed the equipment. Illegal disposal of

equipment, batteries and accumulators by the

user involves the application of the penalties

provided for in the current legislation.

Technical speciﬁcations

Technology: Wireless

Input: DC 5V / 1A

Output: DC 5V / 1A

Listening time: 10h

Charging time: 3-5h

Battery: Lithium 3600 mAh

Wireless range: 10m

Software: AC6925E

Frequency: 2.408-2.480GHz

Maximum radiated power: <20mW

Maximum speaker power: 5W

Speaker diameter: 40mm

Frequency response: 20Hz-20KHz

LED light: 3W

LED life: 30.000-50.000 hours (not

replaceable at the end of life)

is product complies with RoHS

2011/65 / EU - 2015/863 / EU.

e product carries the CE mark and

complies with the safety standards

established by the European Union.

Hereby, Esprinet SpA declares that the

product complies with Directive 2014/53

/ EU. e full text of the EU declaration

of conformity is available at the following

Internet address: www.celly.com/

exchange/CEL LY-SPA/Dichiarazioni_

di_conformita/SPEAKERBIKEBK/DOC_

SPEAKERBIKEBK.pdf

Celly® is a registered trademark owned

by CELLY S.p.A.

All registered trademarks are the

property of their respective owners.

ESPRINET S.p.A., via Energy Park 20,

20871 Vimercate - MB (ITALY)

Made in China

User manual

MULTIFUNCTION SPEAKER

Model: SPEAKERBIKE

Rev00 - 23.01.2021

Function Press the button Timing

Power On / Oﬀ 3 seconds

Play / Pause 1 click

Most Recent Call 2 clicks

Volume - 1 click

Volume + 1 click

Maximum Torch Power 1 click

Minimum Torch Power 2 clicks

Intermittent Flashlight 3 clicks

Produkt Specifikationer

Mærke:	Celly
Kategori:	Højttaler
Model:	SPEAKERBIKEBK
Bredde:	200 mm
Dybde:	80 mm
Højde:	50 mm
Vægt:	560 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Batterikapacitet:	3000 mAh
Produkttype:	Bærbar mono højttaler
Bluetooth:	Ja
Batteriteknologi:	Lithium polymer (LiPo)
Antal højttalere:	1
Udgangseffekt (RMS):	3 W
Anbefalet brug:	Universel
Impedens:	32 ohm (Ω)
Forbindelsesteknologi:	Trådløs
Standby tid:	200 t
Batterilevetid (maks.):	10 t
Batteritype:	Indbygget batteri
Opladningstid for batteri:	3 t
Driver diameter:	45 mm
Sensitivitet:	32 dB
Produktdesign:	Cylinder
Bluetooth-område:	10 m