Chamberlain RTXW1 Manual


Læs gratis den danske manual til Chamberlain RTXW1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Chamberlain RTXW1, eller vil du spørge andre brugere om produktet?

Side 1/4
de 1-Kanal / 2 Kanal Wandsender
RTXW1 / RTXW2
HANDSENDER EINLERNEN
WICHTIGE SICHERHEITSHINWEISE - BITTE SORGFÄLTIG LESEN UND AUFBEWAHREN
TECHNISCHE DATEN ENTSORGUNG
EU-KONFORMITÄTSERKLÄRUNG
Der Wandsender ist kompatibel mit:
Chamberlain Rollladenantrieb: RPD10ER, RPD15ER, RPD25ER, RPD40ER
Chamberlain Empfänger: RRX1
Die Lerntaste am Master Handsender oder an einem bereits eingelernten Handsender 8 x drücken (Motor (1)
Peep) und anschließend die Lerntaste des neuen Handsenders RTXW1 oder RTWX2 drücken. Neuer (2) (3)
Handsender wurde erfolgreich eingelernt. Der Motor bestätigt das mit einer kurzen Bewegung in jede Richtung.
Einlernen als Master Handsender / am Empfänger Modell RRX1 siehen entsprechende Anleitung!
Hiermit erklärt Chamberlain GmbH dass der Funkanlagentyp RTXW1/W2 der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der
folgender Internetadresse verfügbar: https://chamberlain.de/Chamberlain/media/Chamberlain/CE/114ADoC_RTX_A_2020.pdf
Die Verpackung muss in den örtlichen Recycle-behältern entsorgt werden. Gemäß der Europäischen
Richtlinie 2002/96/EG über Elektro-Altgeräte muss dieses Gerät nach Verwendung ordnungsgemäß
entsorgt werden um eine Wiederverwertung der verwendeten Materialien zu gewährleisten. Altakkus
und Altbatterien dürfen nicht in den Hausmüll entsorgt werden, da diese Schadstoffe beinhalten und
müssen ordnungsgemäß bei kommunalen Sammelstellen oder in den bereitgestellten Sammelbehältern der
Händler entsorgt werden. Landesspezische Bestimmungen müssen beachtet werden.
WICHTIGE SICHERHEITSHINWEISE FÜR DEN BENUTZER & MONTEUR
Achtung! Nichtbeachten kann zu ernsthaften Verletzungen führen.
Erlauben Sie Kindern nicht, mit Steuerungen zu spielen.
Rollladen- oder Sonnenschutzanlage während des Betriebes beobachten.
Arbeiten an der Elektroinstallation dürfen nur von qualiziertem Fachpersonal
durchgeführt werden.
Es dürfen nur Ersatzteile, Werkzeuge und Zusatzeinrichtungen verwendet
werden, die von der Firma Chamberlain freigegeben sind.
Für nicht freigegebene Fremdprodukte oder Veränderungen am Zubehör haftet
der Hersteller oder Anbieter nicht für entstandene Personen- oder Sachschäden
sowie Folgeschäden.
Steuereinrichtungen in Sichtweite des angetriebenen Produktes in einer Höhe
von über 1,5m anbringen.
BESTIMMUNGSGEMÄSSE VERWENDUNG
Die Fernsteuerung ist nur für Rollladenantriebe aus dem Hause Chamberlain
geeignet (ER-Serie). Besitzt Ihre bereits vorhandene Fernsteuerung ein anderes
Design ist sie nicht kompatibel mit diesen Geräten! Zur ordentlichen Funktion
dieser Fernsteuerungen ist ein Funkrollladenantrieb (ER-Serien) aus dem
Hause Chamberlain erforderlich oder ein Universalempfänger (Modelle: RRX1).
Eine andere oder eine darüber hinausgehende Benutzung gilt nicht als bestimmungs-
gemäß. Werden die Steuerungen und Antriebe für andere als die oben genannten
Einsätze verwendet oder werden Veränderungen an den Geräten vorgenommen, die
die Sicherheit der Anlage beeinussen, so haftet der Hersteller oder Anbieter nicht für
entstandene Personen- oder Sachschäden sowie Folgeschäden. Für den Betrieb der
Anlage oder Instandsetzung sind die Angaben der Betriebsanleitung zu beachten. Bei
unsachgemäßem Handeln haftet der Hersteller oder Anbieter nicht für entstandene
Personen- oder Sachschäden sowie Folgeschäden.
Batterie Typ / Anzahl CR2430 / 1
Stromversorgung 3V DC
Sendeleistung max. ≤ 10mW
Frequenz 433,92 MHz
System Rolling code
Schutzklasse IP30
Temperatur -10°C - +50°C
1
2 3
PROGRAMMING REMOTE CONTROL
IMPORTANT SAFETY RULES - SAVE THESE INSTRUCTIONS
TECHNICAL DATA DISPOSAL
EU DECLARATION OF CONFORMITY
The remote control is compatible with:
Chamberlain tubular motor: RPD10ER, RPD15ER, RPD25ER, RPD40ER
Chamberlain receiver: RRX1
Press the learn button on the master remote control or on an already learned remote control 8 times (motor (1)
beep) and then press the learn button on the new remote control RTXW1 or RTXW2. The new remote (2) (3)
control has been successfully taught. The motor conrms this with a short jerk in each direction.
For programming a master remote control / on receiver model RRX1 see corresponding instructions!
Hereby, Chamberlain GmbH declares that the radio equipment type RTXW1/W2 is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet address:
https://chamberlain.de/Chamberlain/media/Chamberlain/CE/114ADoC_RTX_A_2020.pdf
The packaging must be disposed of in the local recyclable containers. According to the European
Directive 2002/96/EC on waste electrical equipment, this device must be properly disposed of, after
usage in order to ensure a recycling of the materials used. Old accumulators and batteries may not
be disposed of in the household waste, since they contain pollutants and must be properly disposed
of in municipal collection points or in the containers of the dealer provided. Country-specic regulations must
be observed.
IMPORTANT SAFETY INSTRUCTIONS FOR THE USER
Caution! Non-compliance can result in serious injury.
Do not allow children to play with the controls.
Any work on the electrical installation including servicing may only be performed by a
qualied electrician.
Check shutter or sun-blind system regularly for signs of wear and damage. Damaged
systems should not be used under any circumstances until such time as they have
been repaired.
Observe shutter or sun-blind system carefully whilst in operation..
Only those spare parts, tools and other equipment as have been approved by
Chamberlain may be used.
Fit control facilities within sight of the product to be controlled at a height of at least
1.5 m.
CORRECT USE
The remote controls in this product are only suitable for use in conjunction with
shutter drives made by Chamberlain (ER-Series). Should your existing remote
control have a different design, it is not compatible with these devices!
To ensure that these remote controls function properly, a radiocontrolled
shutter drive (ER-Series) made by Chamberlain or a
universal receiver (Models: RRX1) is required.
Any other form of usage is deemed to be incorrect. Neither the manufacturer nor the
supplier assumes any liability for personal injury, damage to property or consequential
injury or damage occurring as a result of the use of the control units and / or drives for
purposes other than those mentioned above or due to changes made to the equip-
ment affecting the safety of the given system.
The details stipulated in the Operating Instructions in respect of the operation and
repair of the system require strict observance. Neither the manufacturer nor the
supplier assumes any liability for personal injury, damage to property or consequential
injury or damage occurring as a result of non-compliant actions.
Battery type / QTY CR2430 / 1
Power supply 3V DC
max. remote power ≤ 10mW
Frequency 433,92 MHz
System Rolling code
Degree of protection IP30
Temperature -10°C - +50°C
en 1 channel / 2 channel transmitter
1
2 3
RTXW1 / RTXW2


Produkt Specifikationer

Mærke: Chamberlain
Kategori: Ikke kategoriseret
Model: RTXW1

Har du brug for hjælp?

Hvis du har brug for hjælp til Chamberlain RTXW1 stil et spørgsmål nedenfor, og andre brugere vil svare dig