Chamberlain WSLCEV-P1 Manual

Chamberlain Ikke kategoriseret WSLCEV-P1

Læs gratis den danske manual til Chamberlain WSLCEV-P1 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Chamberlain WSLCEV-P1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

To prevent possible SERIOUS INJURY or DEATH from electrocution

or fire:

• Turn off power at the fuse box or circuit breaker BEFORE

proceeding.

• The light control is ONLY for indoor use.

• Installation and wiring MUST be in compliance with ALL local

electrical and building codes.

SPECIFICATIONS

Bulb Type: . . . . . . . . . . . . . . Compact fluorescent, incandescent, or LED

Max Load Rating:...................................300 Watts

Incandescent Lamp .................................300 Watts

Compact Fluorescent Lamp (CFL)...................... 2.5 Amps

Voltage .............................................120 Vac

NOTE: The wall plate is

not provided.

OVERVIEW

MODES OF OPERATION

REMOTE CONTROL OPERATION:

Allows you to activate the Smart Light Switch

from a remote control.

NOTE: If your remote control is already

programmed to your garage door opener, choose

a different remote control button to program to

the Smart Light Switch.

SMARTPHONE OPERATION:

Allows you to activate the smart light switch from

your smartphone or tablet, set schedules to switch

your lights on/off at customized times, and receive

notifications when your light remains on.

*Smartphone control requires a MyQ® Garage, Smart Garage Hub, MyQ®

Internet Gateway, or Wi-Fi® Garage Door Opener.

The Smart Light Switch can be programmed to the MyQ

® app*, to a Security+ 2.0® remote control, or to a MyQ® enabled garage door opener.

GARAGE DOOR OPENER OPERATION:

Allows you to synchronize the Smart Light Switch

with your garage door opener light bulbs. The

synchronization with the garage door opener lights

is disabled if you manually turn the light switch on.

The light switch must be OFF to synchronize the

garage door opener with the light switch.

Example: The garage door opener light bulbs are set to automatically turn

off after 4 ½ minutes, the Smart Light Switch will also turn off after 4 ½

minutes.

Switch

LED

NOTICE: To comply with FCC and/or Industry Canada (IC) rules, adjustment or modiﬁcations of this

transceiver are prohibited. THERE ARE NO USER SERVICEABLE PARTS.

This device complies with Part 15 of the FCC rules and IC RSS-210. Operation is subject to the following

two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

AVIS : Les règles de la FCC et/ou d’Industrie Canada (IC) interdisent tout ajustement ou toute modiﬁcation de

ce récepteur. IL N’EXISTE AUCUNE PIÈCE SUSCEPTIBLE D’ÊTRE ENTRETENUE PAR L’UTILISATEUR.

Cet appareil est conforme aux dispositions de la partie 15 du règlement de la FCC et de la norme IC RSS-210.

Son utilisation est assujettie aux deux conditions suivantes : (1) ce dispositif ne peut causer des interférences

nuisibles, et (2) ce dispositif doit accepter toute interférence reçue, y compris une interférence pouvant

causer un fonctionnement non souhaité.

Learn Button

Cover

CARTON INVENTORY

Screws (2)

Smart Light Switch

Wire Nuts

(2)(1)

The Smart Light Switch offers a

convenient way to control the lights in

your home. It can be programmed to

be controlled from anywhere with your

smartphone and the Chamberlain

MyQ® App*. The Smart Light Switch

is also compatible with up to 8

Security+ 2.0® remote controls a OR

combination of up to 8 MyQ® enabled

garage door openers. This product is

NOT recommended for control of

household appliances or fans. Not for

use with 3-way or 4-way switch

combinations.

SMART LIGHT SWITCH

MODELS WSLCEV AND WSLCEV-P1

WARNING: This product can expose you to chemicals including

lead, which are known to the State of California to cause cancer

or birth defects or other reproductive harm. For more information

go to www.P65Warnings.ca.gov

BEFORE YOU BEGIN:

This device REQUIRES a ground; if a ground is not available, contact a

qualified electrician. If you are not experienced and familiar with electrical

wiring and electrical codes, contact a qualified electrician. Some codes

require installation by a qualified electrician. Install in accordance with all

national and local codes. Ensure the existing switch and light are working

prior to installing the new switch.

1. Disconnect power at the circuit breaker or fuse box BEFORE

proceeding.

2. Remove the wall plate and set aside for re-assembly.

REMOVE OLD WALL SWITCH:

1. Remove switch from switch box.

2. During removal, identify or label the load and line wires.

NOTE: Typically a line wire is the incoming hot wire from the circuit

breaker. The load wire is the wire supplying power between the switch

and the light.

3. Keep all load wires separated from line wires.

INSTALL NEW SWITCH (Figure 1):

1. Identify the antenna routing (Figure 1).

2. Connect the wires (Figure 2). NOTE: If your wiring includes a neutral

wire this wire is not required, combine neutral wire(s) and cap with

wire nut (not provided).

• Green wire to ground.

Connect the green wire on the new switch to the exposed copper

ground, green wire, or to the ground connection within metal

switch box. NOTE: If ground doesn’t exist contact an electrician to

add a ground. This product will not function without a proper

ground.

• Red wire to load.

• Black wire to line.

3. Secure connections with a wire nut and wrap each wire nut with

electrical tape.

NOTE: Turn all wire nuts clockwise, making sure the bare wires are

covered. Tug on each wire nut to make sure the connections are good.

4. Carefully pack the wiring back into switch box. Make sure the wires are

not pinched or strained. Make sure the antenna is hanging straight

down between the switch box and the drywall.

5. Fasten the Smart Light Switch to the switch box with the screws

(provided).

6. Fasten the wall plate securely over the switch box with the original

screws from the wall plate.

TEST

1. Turn on the power to circuit at fuse box or circuit breaker.

2. Test the light switch, manually press the light switch to ensure the

light is functional (Figure 3). If it is not functional, see

Troubleshooting.

INSTALLATION

Figure 3

Black Wire

Line

Red Wire

Load

Green Wire

Ground

To prevent possible SERIOUS INJURY or DEATH from electrocution

or fire:

• Turn off power at the fuse box or circuit breaker BEFORE

proceeding.

• The light control is ONLY for indoor use.

• Installation and wiring MUST be in compliance with ALL local

electrical and building codes.

Switch

Box

Load

Light

Line

Circuit Breaker

or Fuse Box

Black

Wire

Red

Wire

Line

Wire

Neutral

Load

Wire

Load

Smart

Light Switch

Ground

Wires

Neutral

Wires

Ground

Screws

Figure 1

For optimal

range fully

extend the

antenna. Feed

antenna wire

between a gap

between the

switch box

and drywall.

Wall Plate

(existing-not provided)

Screws

(not provided)

Green

Wire

Inside

of cable

Yellow

Antenna

IMPORTANT NOTE: This illustration is ONLY an example and your

application and wiring may be different.

Press the switch to the

ON position. The light

should turn on.

Press the switch to the

OFF position. The light

should turn off.

Figure 2

Produkt Specifikationer

Mærke:	Chamberlain
Kategori:	Ikke kategoriseret
Model:	WSLCEV-P1

Har du brug for hjælp?

Hvis du har brug for hjælp til Chamberlain WSLCEV-P1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Chamberlain Manualer

Chamberlain CHU48C Manual

12 August 2025

Chamberlain RA8001 Manual

3 Juli 2025

Chamberlain CH363C Manual

19 Juni 2025

Chamberlain CH348C Manual

18 Juni 2025

Chamberlain 041A8420 Manual

13 Januar 2025

Chamberlain RZ94-05 Manual

1 Januar 2025

Chamberlain PILCEV-P1 Manual

7 Oktober 2024

Chamberlain RTX8P Manual

2 Oktober 2024

Chamberlain MYQ-G0201 Manual

2 Oktober 2024

Chamberlain 041D9204 Manual

1 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

HammerSmith MultiBattery Manual

14 August 2025

Polar Team Pro shirt Manual

14 August 2025

Rowenta Home Relax MM9050 Manual

14 August 2025

Rowenta Adagio BV3005 Manual

14 August 2025

American Audio Color Burst LED Manual

14 August 2025

Rowenta Brush Activ CF9524 Manual

14 August 2025

Sauermann Si-C320 Manual

14 August 2025

Enabot EBO Luft Manual

14 August 2025

Voltcraft MSW 700-24-F Manual

14 August 2025

Watson VM-144-MN Manual

14 August 2025