Chicco Bravo Rubber Wheel Kit Manual

Chicco Ikke kategoriseret Bravo Rubber Wheel Kit

Læs nedenfor 📖 manual på dansk for Chicco Bravo Rubber Wheel Kit (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 34 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
WARNING: Avoid serious injury or death to your child. Never
use your Bravo Stroller without Wheels PROPERLY attached!
You must read and understand the Rubber Wheel Accessory Kit
instructions and the instructions in the User Guide. If you do not
understand these instructions, DO NOT attempt to attach the
Wheels,
STOP and call Chicco at 1-877-424-4226.
INSTRUCTIONS:
Bravo Rubber Wheel Accessory Kit
IMPORTANT: Please also refer to the instructions
that came with your product.
Remove the Front Wheels by pushing in on the
Release Button, just above the wheel (as shown). And,
at the same time, pull the Front Wheel off of the Stroller
Frame. Repeat for the other Front Wheel.
1 On one side of the stroller remove the Rear Wheel
Hubcap using a flat blade screwdriver, as shown.
Discard
the old Hubcap.
2
1
SS0014E_01
Remove the Pin from the Rear Axle using a flat blade
screwdriver, as shown.
Discard the old Pin.
3 4
Remove the Washer from ther Rear Axle.
Discard the
old Washer.
Kit Includes:
TO REMOVE FRONT AND REAR WHEELS:
Tools Needed: Flat Blade Screwdriver
(1/8” wide)


Produkt Specifikationer

Mærke: Chicco
Kategori: Ikke kategoriseret
Model: Bravo Rubber Wheel Kit

Har du brug for hjælp?

Hvis du har brug for hjælp til Chicco Bravo Rubber Wheel Kit stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Chicco Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer