Chuango SPS-260 Manual

Chuango Alarmsystem SPS-260

Læs gratis den danske manual til Chuango SPS-260 (4 sider) i kategorien Alarmsystem. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Chuango SPS-260, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Product Overview

The strobe outdoor siren can be used as a wireless siren by connecting to the control panel as well as a

standalone alarm system to work with wireless accessories in same frequency by learning.

The solar-powered siren is a totally wireless siren, designed to help protect yards, driveways, gardens

and all types of other external locations. The strobe siren is battery powered and kept re-charging by

the built-in solar panel. The signal transmission is all by wireless radio frequency which achieves

significantly wirefree transmission and enhances the flexibility to install. Users can install some outdoor

strobe sirens to deter the intruders in Omni-directional guard.

SPS-260

Solar-Powered Siren

User Manual

PCB Layout

2minutes

Siren Duration Setting

5minutes

5MIN 2MIN 30S 5MIN 2MIN 30S

Volume Setting

High (default) Mute

HIGH MUTE LOW

HIGH MUTE LOW HIGH MUTE LOW

Low

Jumper Setup

30seconds (default)

5MIN 2MIN 30S

1. Load the 9V battery.

2. Set the volume and duration of the siren.

3. Start to use by pressing the power button on.

Connect to Alarm Panel

Press the learning button (0.5 seconds), the wireless siren goes into

connecting status after one beep is heard. Press or button on Arm

the panel. The wireless siren is connected successfully with the control

panel after another beep.

To give up the connection, press the learning button again to exit.

Note: Please don't trigger any accessory during connecting with alarm panel.

Usage

Work as a Wireless Siren

After connected to the alarm panel, the siren will hoot and the strobe light will flash when the alarm

panel alarms.

Getting Started

External Tamper Switch

Note: The status LED will flash once every 5 seconds in arm status. It will not flash when in disarm status.

The siren will sound immediately if the tamper switch is triggered.

Learning Button

Internal Tamper Switch

Status LED Indicator

Alarm LED Indicators

Volume Setting

Siren Duration Setting

Power On/Off

18650

9V 6F22

Produkt Specifikationer

Mærke:	Chuango
Kategori:	Alarmsystem
Model:	SPS-260
Kode for international beskyttelse (IP):	IP55
Type:	Trådløs sirene
Produktfarve:	Black, Red, White
Batterispænding:	3.7 V
Alarm decibel:	115 dB
Standby strøm:	1200 mA