Cioks 4 Manual

Cioks Ikke kategoriseret 4

Læs gratis den danske manual til Cioks 4 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Cioks 4, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Version 1.03 December 9 Version 1.03 Dec ber 9 201 em 201

Powering CIOKS 4 with a powerbank or other USB source

If you wish to power CIOKS 4 with a powerbank, a USB adapter or other USB source you must use a cable

with a USB A plug at one end and a USB C plug at the other end which goes into CIOKS cable with 4. A

USB C plugs at both ends will not work. Preferably use high-quality cable intended for charging having a a

low resistance and avoiding losing power in the cable and connectors. Powerbanks with 3A of output er

current capability will give you the maximum output power of CIOKS 4 when powered of a powerbank.

That is 9W of output power corresponding to approx. 1000mA at 9V DC for your pedals.

Powering dierent pedal types

Each individual rig is dierent, therefore if you have questions about using the CIOKS 4 power supply

please e-mail your detailed questions including the power requirements of your specic pedals directly to

support@cioks.com.

Not included accessories

CIOKS Mini GRIP

The Mini GRIP bracket allows easy and drill-free mounting of CIOKS 4 power supply below any

Pedaltrain board except the smallest Nano model (order no. MGRIP).

Hex stand-os

A set of four 8mm hex stand-os (only 3 need to be used) to make an oset and space for the nger screws

in-between the power supply and a Templeboard (order no. 4HEX).

Technical specications

Input 1: 5V DC max. 3A (USB C socket) ,

Input 2: 9-24V DC or 9-12V AC, max. 2A (non-polarized 5,5/2,1mm DC socket)

Outputs 1-4: 9V DC / 0mA 66 or

12V DC / 500mA or

15V DC / 400mA or

18V DC / 330mA each

Total output power is max. 24W provided an appropriate and sucient input power source is applied.

Size: 25,4 2.9 (excl. rubber feet) 74x88x mm / x3.5x1.0”

Weight: g / 0.5 230 lb

Warranty period: 5 years worldwide

What’s in the box?

• CIOKS 4 power supply

• 5 Flex cables

• 50cm DC Link cable

• Mounting hardware (2 screws and a hex-key)

• Product sheet (drill guide)

• Flex and DC Link cable selection guide

• Sticker (sheet with 4pcs.)

• Manual

User’s Manual

Version 1.03 December 2019 –

Introduction

Since 1991, the Danish company CIOKS has been providing guitar and bass players with reliable power

supplies dedicated for eect pedals. After more than a quarter of a century, CIOKS has designed the

CIOKS 4 power supply which is part of our Future Power Generation professional power supply product

range. CIOKS 4 is designed to be used with up to four high current pedals (as well as others with lower

current draw) with super exible input power options. Our new CIOKS 4 power supply is a great choice

for small pedalboards or as an expansion of your existing DC7 unit.

Features

• Expand your CIOKS DC7 power supply with 4 additional isolated outlets

• Small and light stand-alone power supply for a small pedalboard

• Use almost any DC or AC adapter to power CIOKS 4, also the 1-SPOT or GigRig Generator

• Power CIOKS 4 with a USB C source like a powerbank

• Slim lb 1-inch prole (25,4mm), only 230g (0.5 )

• Ultra-low noise achieved by multi-stage ltering

• 4 isolated DC-outlets, 6W each (660mA at 9V on each outlet)

• 4 selectable voltages on each outlet (9, 12, 15 or 18V)

• Individual status LED on each outlet and global status LED

• Total maximum output power W 24

• Mounting hardware for Pedaltrain and Temple Audio boards included

• Compatible with CIOKS Mini GRIP for drill-free Pedaltrain mounting

• 5 Flex cables included

• Designed in Denmark, assembled in Poland

• 5-year worldwide warranty

Version 1.03 December 9 Version 1.03 Dec ber 9 201 em 201

Overview

Left

On the left side you ll nd the USB C and the non-polarized DC input sockets and the four RCA sockets wi

being outlets 1-4 for powering pedals.

Top

CIOKS logo has a red LED placed in the middle of the letter ‘O’ and this functions as a global status

indicator For each outlet you have a voltage selector switch and an advanced LED indicator. .

Front

The two holes in the front with metric M4 threads are to be used with the Mini GRIP bracket (sold

separately) for mounting to Pedaltrain boards with no drilling required.

Bottom

The four detachable rubber feet are situated on the bottom of the enclosure. On this same surface you will

nd 3 holes with metric M4 threads which should be used for mounting of the power supply to a

pedalboard.

Getting started

Connect a supply voltage to CIOKS 4 power supply within the specied type and range Set the output .

voltage a given outlet to either 9, 12, 15 or 18V depending on the needs of the particular pedal to be on

powered. Using the right Flex cable type connect your pedal to outlet. Repeat this with your remaining this

pedals.

Advanced LED Monitoring feature

Each isolated outlet has its individual LED status indicator. The indicator is lit in normal operation. The

LED light gets dim when you operate just on the edge of the current mA limit for the voltage you have

chosen on the given outlet. If you overload or short circuit an outlet, the respective LED indicator turns o.

The light intensity of the status LED will be higher when the output voltage is set to higher value an 9V a th

being 12, 15 or 18V.

Global status indicator

If COKS 4 power supply is powered solid power source sucient to provide enough power of a and

everything functions normally the red LED inside the O letter in CIOKS logo will be lit. If the source

supplying CIOKS 4 power supply is too weak and the voltage on the input of CIOKS 4 is too low the

indicator will turn o.

Pedalboard mounting

General

The most solid way is using the drill template being the product sheet and then drill two diagonally

positioned ø4,5mm or ø5,0mm holes in the pedalboard and fasten the CIOKS 4 to it with the two included

screws. Due to CIOKS 4 extremely at prole and low weight you can use Dual-Lock tape or industrial

Velcro to fasten it below any type of pedalboard. In general for mounting in a rack, pedalboard or other

structure we recommend using two of the ve threaded M4 holes (3 in the bottom and 2 in the front) and

matching metric M4 screws. Remember not to penetrate the CIOKS 4 with more than 5mm with the screws

used.

Pedaltrain

For Pedaltrain boards we recommend an easy alternative way of mounting CIOKS 4 unit by using the Mini

GRIP bracket where no drilling is needed.

Temple Audio

The three threaded M4 holes in the bottom of CIOKS 4 are aligned with the grid of Templeboards and

allow for very easy mounting on top or below any Temple Audio pedalboard with the included 2 screws.

We recommend using the two holes positioned diagonally. If you want to make a distance between the

board’s surface and the CIOKS 4 to allow space for the Temple Audio nger screws you should get a set

of three 8mm hex stand-os with matching screws (order no. 4HEX) and then use these with all three

threaded holes in the bottom of the power supply.

Included accessories

Flex cables

CIOKS oers a wide selection of dierent Flex cable types for connection your pedals to the power

supply. Below you see a list of the included Flex cables with your unit:

• Standard Flex type 1 black with 5,5/2,1mm centre negative DC plug x4 –

• 3-way daisy chain Flex type 1 black with three 5,5/2,1mm centre negative DC plugs –x1

The 3-way daisy chain Flex should be used if you wish to power three pedals with the same voltage using

only one outlet. For further information about all CIOKS Flex cables please have a look at the included

Flex cable selection guide or visit CIOKS web site.

DC Link cable

A DC Link cable in 50cm length is included and should be used to connect CIOKS 4 power supply to

CIOKS DC7 power supply and power CIOKS 4 ’s 24V DC outlet. You can also use this cable to connect

of another compatible 24V DC source.

Mounting hardware

We have included all the needed mounting hardware to mount the power supply on top or underneath a

Pedaltrain or a Temple Audio pedalboard. You can of course also attach it to other types of pedalboards.

CIOKS 4 output power capability

A solid DC source of minimum 17V DC is needed to obtain full 24W of output power capability from

CIOKS 4. If a lower voltage is applied to the DC input socket or you are powering the unit of a USB

source its output power capability will be lower than the 2 . The table below shows the maximum 4W

output power of CIOKS 4 depending on the type and voltage of power source which is used to power it.

Input

Input voltage

Input current

Output power

Total output

current @ 9V

9V DC

10,8W

1200mA

12V DC

15,3W

1700mA

15V DC

19,8W

2200mA

>17V DC

max. 2A

max. 24,0W

max. 2640mA

9V AC

6,3W

700mA

12V AC

10,8W

1200mA

5V DC

6,3W

700mA

5V DC

9,0W

1000mA

Produkt Specifikationer

Mærke:	Cioks
Kategori:	Ikke kategoriseret
Model:	4

Har du brug for hjælp?

Hvis du har brug for hjælp til Cioks 4 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Cioks Manualer

Cioks DC7 Manual

24 August 2024

Cioks 4 Manual

23 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

10 Oktober 2025

10 Oktober 2025

10 Oktober 2025

10 Oktober 2025

Oras Saga 3970 Manual

10 Oktober 2025

TOA AT-4030B-EB Manual

10 Oktober 2025

TOA VX-030DA Manual

10 Oktober 2025

TOA RS-481 Manual

10 Oktober 2025

TOA AT-4200B-EB Manual

10 Oktober 2025

Xerox DocuShare Manual

10 Oktober 2025