Coby CR-A50 Manual

Coby Radio CR-A50

Læs gratis den danske manual til Coby CR-A50 (3 sider) i kategorien Radio. Denne vejledning er vurderet som hjælpsom af 56 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 28.5 anmeldelser. Har du et spørgsmål om Coby CR-A50, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

CR-A54

CR-A50

The lightning ﬂash with arrowhead symbol within an equilateral tri-

angle is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufﬁcient magnitude to constitute a risk of electric shock.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operation and servicing

instructions in the literature accompanying the appliance.

For Customer Use:

Enter below the serial number that is located on the bottom of

the unit. Retain this information for future reference.

Model No. CR-A54 / CR-A50

Serial No.

For recycling or disposal information about this product,

please contact your local authorities or the Electronics In-

dustries Alliance: www.eiae.org.

WARNING:

To prevent ﬁre or shock hazard, do not expose this device to rain or moisture. Dangerous high

voltage is present inside the enclosure. Do not open the cabinet.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot of outlet and fully

insert.

Protect your hearing: Hearing experts advise against the constant use of personal stereos

played at high volume. Constant exposure to high volumes can lead to hearing loss. If you should

experience ringing in the ears or hearing loss, discontinue use and seek medical advice.

Important Safety Instructions

PRECAUTIONS

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Note:

This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help

Use of shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual. If such changes or modifications should be made, you could be

required to stop operation of the equipment.

Read Instructions: All the safety and operating instructions should be read before the

product is operated.

Retain Instructions: The safety and operating instructions should be retained for future

reference.

Heed Warnings: All warnings on the product and in the operating instructions should

be adhered to.

Follow Instructions: All operating and usage instructions should be followed.

Cleaning: Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Attachments: Use only attachments recommended by the manufacturer. Use of other

attachments may be hazardous.

Water and Moisture: Do not use this product near water (e.g., near a bath tub, washbowl,

kitchen sink, laundry tub, in wet basements, or near a swimming pool and the like).

Accessories: Do not place this product on an unstable cart, stand, tripod, bracket, or

table. Use only with carts, stands, tripods, brackets, or tables recommended by the

manufacturer or sold with the product. Any mounting of the product should follow the

manufacturer’s instructions and should use a mounting accessory recommended by

the manufacturer.

A product and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the product and cart

combination to overturn.

Ventilation: Slots and openings in the cabinet are provided for ventilation

to ensure reliable operation of the product and to protect it from overheat-

ing. These openings should never be blocked by placing the product on a bed, sofa,

rug, or other similar surface. This product should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is provided or the manufacturer

instructions have been adhered to.

Power Sources: This product should be operated only from the type of power source

indicated on the rating label. If you are not sure of the type of power supply to your home,

consult your product dealer or local power company. For products intended to operate

from battery power or other sources, refer to the operating instructions.

Grounding or Polarization: This product may be equipped with a polarized alternating-

current line plug that has one blade wider than the other. This plug will only ﬁt into the

power outlet in one direction. This is a safety feature. If you are unable to insert the plug

fully into the outlet, try reversing the direction of the plug. If the plug should still fail to ﬁt,

contact an electrician to replace the obsolete outlet. Do not defeat the safety purpose

of the polarized plug.

Power-Cord Protection: Power supply cords should be routed so that they are not likely

to be walked on or pinched by items placed upon or against them, paying particular

attention to cords at plugs, convenience receptacles, and at the point which they exit

from the product.

10.

11.

12.

13.

Speciﬁcations and manual are subject to change without prior notice.

If you have a problem with this unit, please read the troubleshooting guide below and check our website at www.cobyusa.com for Frequently Asked

Questions (FAQs) and ﬁrmware updates. If these resources do not resolve the problem, please contact Technical Support.

The unit does not turn on.

Make sure the unit has been powered on manually.•

•

COBY Electronics Technical Support

56-65 Rust Street

Maspeth, NY 11378

Email: techsupport@cobyusa.com

Web: www.cobyusa.com

Phone: 800-727-3592 (8:00 AM–11:00 PM EST, seven days a week)

800-681-2629 (8:00 AM–5:30 PM EST, Monday to Friday)

718-416-3197 (8:00 AM–5:30 PM EST, Monday to Friday)

There is no sound.

Ensure that the volume of CR-A54/50 and or external device has been set to a

reasonable listening level.

•

Lightning: For added protection for this product, unplug it from the wall outlet and discon-

nect the antenna or cable system during a lightning storm or when it is left unattended

and unused for long periods of time. This will prevent damage to the product due to

lightning or power-line surges.

Power Lines: An outside antenna system should not be located in the vicinity of over-

head power lines or other electric light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna system, extreme care should

be taken to keep from touching such power lines or circuits, as contact with them might

be fatal.

Overloading: Do not overload wall outlets, extension cords, or integral convenience

receptacles as this can result in a risk of re or electric shock.ﬁ

14.

15.

16.

Object and Liquid Entry: Never push objects of any kind into this product through open-

ings as they may touch dangerous voltage points or shout-out parts that could result in

a ﬁre or electric shock. Never spill liquid of any kind on the product.

Servicing: Do not attempt to service this product yourself as opening or removing covers

may expose you to dangerous voltage or other hazards. Refer all servicing to qualiﬁ ed

service personnel.

Damage Requiring Service: Unplug this product from the wall outlet and refer servicing

to qualiﬁed service personnel under the following conditions: a) when the power-supply

or plug is damaged; b) if liquid has been spilled or if objects have fallen into the product;

c) if the product has been exposed to rain or water; d) if the product does not operate

normally by following the operating instructions. Adjust only those controls that are cov

ered by the operating instructions as improper adjustment of other controls may result

in damage and will often require extensive work by a qualiﬁed technician to restore the

product to its normal operation; e) if the product has been dropped or damaged in any

way; f) when the product exhibits a distinct change in performance—this indicates a

need for service.

Replacement Parts: When replacement parts are required, be sure that your service

technician has used replacement parts speciﬁed by the manufacturer or have the same

characteristics as the original part. Unauthorized substitutions may result in ﬁre, electric

shock, or other hazards.

Safety Check: Upon completion of any service or repairs to this product, ask the service

technician to perform safety checks to ensure that the product is in proper operating

condition.

Wall or Ceiling Mounting: The product should be mounted to a wall or ceiling only as

recommended by the manufacturer.

Heat: The product should be situated away from heat sources such as radiators, heat

registers, stoves, or other products (including ampliﬁers) that produce heat.

17.

18.

19.

20.

21.

22.

23.

Make sure the external device has been properly connected to CR-A54/50 by

audio cable.

Troubleshooting

Specifications

Power supply: CR-A54: 120V 60Hz or 220V 50Hz

CR-A50: 120V 60Hz

Back-up battery: DC 9 V

Frequencies: FM 88 - 108MHz

AM 530 - 1700KHz

Power consumption: 3W

Output power: 0.5W

Speaker: 8 ohm

Ensure that the power cord has been properly connected to the power outlet

and the power supply for CR-A54 is 120V 60Hz or 220V 50Hz and for CR-A50

is 120V 60Hz.

Produkt Specifikationer

Mærke:	Coby
Kategori:	Radio
Model:	CR-A50

Har du brug for hjælp?

Hvis du har brug for hjælp til Coby CR-A50 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Radio Coby Manualer

29 August 2024

29 August 2024

28 August 2024

28 August 2024

28 August 2024

28 August 2024

21 August 2024

13 August 2024

Radio Manualer

Nyeste Radio Manualer

Sunstech RPDS250 Manual

15 Juni 2025

Sunstech RPD22 Manual

15 Juni 2025

Greadio GR239 Manual

14 Juni 2025

LIJIANI RD207AF Manual

14 Juni 2025

Sunstech RPDS10 Manual

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

14 Juni 2025

ZHIWHIS ZWS-603 Manual

13 Juni 2025