Cordes CC-400 Manual

Cordes Alarmsystem CC-400

Læs gratis den danske manual til Cordes CC-400 (2 sider) i kategorien Alarmsystem. Denne vejledning er vurderet som hjælpsom af 48 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 24.5 anmeldelser. Har du et spørgsmål om Cordes CC-400, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
)#()#
-2?A6368.A'))
".N20:E0:E0:
,.?;A<; 1/:
!B3A32B05A64826A 
2D605A6;89.AA2?624
)2:=2?.AB?/2?2605 L L
+2?@<?4B;4E.AA2?62;
;605A2;A5.9A2;
Op de Solt 42 · D – 22391 Hamburg
BEWEGUNGSMELDER ALARM
BEWEGUNGSMELDER ALARM
BEWEGUNGSMELDER ALARM
BEWEGUNGSMELDER ALARM BEWEGUNGSMELDER ALARM
MIT FUNK-FERNBEDIENUNG
MIT FUNK-FERNBEDIENUNG
MIT FUNK-FERNBEDIENUNG
MIT FUNK-FERNBEDIENUNGMIT FUNK-FERNBEDIENUNG
MODEL: CC-400
MODEL: CC-400
MODEL: CC-400
MODEL: CC-400MODEL: CC-400 #*#(#!)*#
6@A.;GC<;:.E:GB:%'9.?:2?9.?:/2@AIA64A1628A6C62?B;4
:6A26;2:8B?G2;%;;2?5.9/C<;(28B;12;:BN162;B;
K/2?D.05A2-<;2C2?9.@@2;D2?12;#.0512;(28B;12;D6?1/26
2D24B;4@2?3.@@B;412?9.?:.B@429J@A
2.8A6C62?B;4
?K082;(6212;$33 ;<=312?2?;/2162;B;46;;2?5.9/26;2?6@A.;G
C<::.E:GB:%'9.?:
2?9.?:/2@AIA64A1622.8A6C62?B;4:6A26;2:8B?G2;%
"2?82
,2;;12?9.?:;605A12.8A6C62?AD6?1/2C<?162K/2?D.05A2-<;2/2A?2A2;
D6?1D6?11622D24B;4@2?3.@@B;4:6A26;2:%.;42G264A,2;;
6;;2?5.9/C<;(28B;12;12?%'9.?::6A12?B;832?;/2162;B;4
1.;.05;605A12.8A6C62?AD6?1D6?112?9.?:.B@429J@A
?3.@@B;4@/2?2605
2?2D24B;@:2912?5.A26;2'2605D26A2C<;/6@0.::6A26;2:
?3.@@B;4@D6;829C<;LPC2?A68.9B;1L5<?6G<;A.9+<?12?"<;A.42
:B@@12??605A642"<;A.42<?A.B@=?</62?AD2?12;
Pflege
.@25IB@28.;;:6A26;2:92605A32B05A2:)B0542?26;64AD2?12;
+<?@605A2;BAG2;(62GB:'26;642;826;252:628.962;
Fehlersuche
2?%'9.?:5.A826;2B;86A6<;<12?9I@@A@605;605A.8A6C62?2;
M%?K32;</.AA2?62;=<9?605A646;@A.9962?A@6;1B;1
42;K42;1(=.;;B;45./2;
M'2605D26A212?B;832?;/2162;B;4K/2?@05?6AA2;
.AA2?62GB@A.;1@.;G264212@%'9.?:92B05A2A
M.AA2?62;.B@D205@29;
'<A2@ <;A?<99605A12?B;832?/2162;B492B05A2A
M.AA2?62.B@D205@29;
Batterie Informationen
%'9.?:@<D62B;832?;/2162;B;4;B?;.052162;B;4@.;926AB;4
/2;BAG2;
M#B?6;12?2162;B;4@.;926AB;4/2@05?62/2;2.AA2?62;/2;BAG2;
M.AA2?62;=<9?605A64D626:6.4?.::6:.AA2?623.05/2@05?62/2;
6;@A.9962?2;.9@052.AA2?62=9<.?6AIA8.;;12:%'9.?:B;112?
B;832?;/2162;B;4@05.12;
M#B?.AA2?62;4926052?&B.96AIAB;1(=.;;B;46;@A.9962?2;
M.99@12?%'9.?:@25?9.;42-26A;605A/2;BAGAD6?12;A;25:2;
(62162.AA2?62;1.:6A/2626;2:2C2;AB2992:B@9.B32;12?.AA2?62
12?%'9.?:;605A/2@05I164AD6?1
M#62:.9@;605AD6212?.B39.1/.?2.AA2?62;C2?@B052;.B3GB9.12;
E=9<@6<;@423.5?
Übersicht
Batterie Installation
%'9.?:
.@.AA2?623.056@A.B312?'K08@26A212@%'9.?:@H33;2;
(621.@.AA2?63.05
;@A.9962?2;(62=<9?605A64(AK0898.96;2.AA2?62;
#.0512:162GD26A2.AA2?626;@A.9962?AD?B122?AJ;A8B?G26;
%B:162?605A642;@A.99.A6<;12?.AA2?62;GB/2@AIA642;
(05962@@2;(621.@.AA2?623.05
Lernfunktion der Alarmanlage für die Frequenz der Funkfernbedienung
#.0512:162.AA2?62;6;@A.9962?A@6;11?K082;(62492605G26A6;412;!2?;
@05.9A2?12@%'9.?:@B;112;$#(05.9A2?12?B;832?;/2162;B;4
2?9.?:/2@AIA64A:6AGD268B?G2;%1.@@162?2>B2;G12?B;8
32?;/2162;B;42?3<94?260542@=26052?ADB?12
"2?82
#.057212:.AA2?62D205@29:B@@162@2?+<?4.;4D6212?5<9AD2?12;
Batteriezustandsanzeige
62.AA2?62GB@A.;1@.;G264212@%'9.?:@<D6212?B;832?;/2162;B;4
92B05A2A?<AD2;;162.AA2?62;2?@2AGAD2?12;:K@@2;62B;832?;/2
162;B;4/2;JA64A(AK08%6:!6232?B:3.;42;A5.9A2;
Installation
,I592;(6212;"<;A.4<?A@<?43I9A64.B@B:162:6A4296232?A2
,.;15.9A2?B;4GB/232@A642;
"<;A62?2;(62162,.;15.9A2?B;4:6A12;:6A4296232?A(05?.B/2;
2?%'9.?:8.;;.B05;B?56;42@A299AD2?12;
Inbetriebnahme
8A6C62?B;412@%'9.?:
?K082;(628B?G12;$; ;<=312?B;832?;/2162;B;46;;2?5.9/26;2?
CC-400_alarm_manual_A4_RZ_CC-400_manual-A4 15.06.10 15:18 Seite 1
SPECIFICATION:
Certificate: R&TTE
Measure: 6,4cm x 9,6cm x 4,7cm
Horn Level: 85db(A) 3m
Ambient Humidity: 10% - 90%
Weight incl. battery: 130g
Operation Temperature: +4° - +50°
Power Source: 2 x AA batteries
(not included)
Op de Solt 42 · D – 22391 Hamburg
MOTION DETECTOR ALARM
MOTION DETECTOR ALARM
MOTION DETECTOR ALARM
MOTION DETECTOR ALARM MOTION DETECTOR ALARM
WITH RF REMOTE KEYFOB
WITH RF REMOTE KEYFOB
WITH RF REMOTE KEYFOB
WITH RF REMOTE KEYFOBWITH RF REMOTE KEYFOB
MODEL: CC-400
MODEL: CC-400
MODEL: CC-400
MODEL: CC-400MODEL: CC-400 INSTRUCTION MANUAL
the unit. A confirmation tone will indicate that the alarm is armed and you
have 30 seconds to vacate the area. After this time, if motion is detected
the alarm will sound.
When entering the protected area
Simply press the ‘Off’ button of the keyfob within the distance of 10 meters
to disarm the unit.
Note that when entering the area, there is a short beep to indicate that
motion has been detected and there is a 4 second delay before the alarm
will sound to allow it to be disarmed.
Detection range
The motion detector of the alarm unit has a range up to 7 meters (23ft)
with approximate angles of 60º vertical and 110º horizontal. Trial different
positions to check area covered.
Care and maintenance
To clean the case, simply use a soft slightly damp cloth with water and wipe
dry immediately.
CAUTION:
Never use chemicals to clean the case, as they may cause damage to the
plastic and cause the alarm not to function.
Troubleshooting
The unit does not sound when the batteries are installed
• Ensure that the batteries are in proper polarity.
The alarm does not arm
• The Alarm unit should “BEEP”, when the ‘ON’ or ‘OFF’ buttons of
remote keyfob are pressed.
The red light on the alarm unit is ON
• This is Battery low indicator, which means the batteries need replacing.
The red light on the key fob does not light, when the buttons are pressed
• Battery of the keyfob need replacement.
Battery precautions
When using this product follow these precautions at all times.
• Use only the appropriate size batteries.
• Be sure to follow the correct polarity when installing the batteries as
indicated in the battery compartment. Incorrect polarity may cause
damage to the alarm.
• Do not mix different types of battery such as Alkaline and Carbon-zinc
or old batteries with new.
• If the alarm is not used for long periods of time, remove the batteries
to prevent damage or injury from possible battery leakage.
• Do not recharge batteries not intended to be recharged as they can
overheat and rupture. (Always follow the manufacturer’s directions.)
Controls
Battery installation
Alarm Unit
1 The battery compartment is accessed from the rear of the alarm
unit by removing the battery cover.
2 Insert two (2) ‘AA’ size Alkaline batteries (not included), following
the polarity of diagram.
3 When the last battery is inserted the alarm will beep, indicate that
the batteries are installed properly.
4 Close the battery cover.
Learning Remote Keyfob code to the Alarm Unit
After batteries installed, learn the Remote Keyfob code, press the Learn
button on the Alarm unit and press the ‘On’ button of keyfob. The Alarm
unit will beep 2 times when set. The Alarm is ready to use.
Note: The alarm unit will need to relearn the Remote keyfob code every
time the batteries are replaced in either the alarm unit or the remote keyfob
Low battery
The Battery low indicator will light when the batteries is needed to be
replaced in the Alarm Unit.
The Remote keyfob uses 1 piece A27 battery (included). If battery low
indicator is ‘On’, simple remove and replace with fresh battery.
Installation
1 Place the alarm in the desired location, using wall mount bracket
provided.
2 Fix bracket to the wall using the screws supplied.
Please note that this alarm can also be used free standing.
Operation
When exiting the protected area
Simply press ‘’On’ button of keyfob within the distance of 10 meters to arm
CC-400_alarm_manual_A4_RZ_CC-400_manual-A4 15.06.10 15:18 Seite 2

Produkt Specifikationer

Mærke: Cordes
Kategori: Alarmsystem
Model: CC-400

Har du brug for hjælp?

Hvis du har brug for hjælp til Cordes CC-400 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Alarmsystem Cordes Manualer

Cordes

Cordes CC-2200 Manual

27 December 2024
Cordes

Cordes CC-400 Manual

21 August 2024
Cordes

Cordes CC-800 Manual

21 August 2024

Alarmsystem Manualer

Nyeste Alarmsystem Manualer

Evolveo

Evolveo Alarmex Pro Manual

18 September 2025
Kemo

Kemo M062 Manual

18 September 2025
Velleman

Velleman K8093 Manual

17 September 2025
Smartwares

Smartwares FGA-13091 Manual

16 September 2025
Brandson

Brandson 304339 Manual

15 September 2025
Kidde

Kidde SM120X Manual

14 September 2025
Elektrobock

Elektrobock ELBO-073 Manual

14 September 2025
Kidde

Kidde 20SD10-CA Manual

3 September 2025
Kidde

Kidde 20SDR-CA Manual

2 September 2025
Kidde

Kidde 20SA10-CA Manual

2 September 2025