Cordes CC-2200 Manual

Cordes Alarmsystem CC-2200

Læs gratis den danske manual til Cordes CC-2200 (1 sider) i kategorien Alarmsystem. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Cordes CC-2200, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
Cordes Barking Dog CC- 2200 User’s Manual
Thank you for purchasing our alarm system. Please take a few
minutes to read the user’s manual thoroughly and familiarize yourself
and your family with its operation. Keep the manual for future
reference.
This alarm system is equipped with a radar sensor to detect motions
through doors and walls. It can be chosen between a doorbell,
barking dog, or alarm. The radar reacts to motions through wood,
plastic, and stone walls. The detection range is affected by the wall’s
thickness. Under normal circumstances, there is no detection through
a wall with more than 18 cm.
Operation:
Remote
Open the battery compartment (16) the remote control and insert of
the included battery (Type CR2032) with positive terminal facing up.
Close the battery compartment afterwards.
Alarm device
This device can be operated with an adapter (12 V/DC 1 A) or 8
Batteries 1,5 V Type AA (not included).
Adapter: Connect the adapter to the connection socket of the
device
Batteries: Insert the batteries into the battery compartment. Observe
correct polarity as indicated. Replace the batteries, once the
BETRIEB (Power) (6) indicator lamp gets weaker or turns off.
Note: The lifespan of the batteries can last for up to one week, as
long as the device does not activate the alarm periodically.
Activate the device and alarm
•
After connecting the device with the mains supply, the BETRIEB
(Power) and AKTIV (Arm) (5) indicator lamp light up. The device is
live and the alarm will be activated after 10 seconds. If you do not
wish the alarm to be activated, press the An/Aus (On/Off) (4) button
immediately after connecting the device to the mains in order to
deactivate alarm. The AKTIV (Arm) (5) indicator lamp turns
•
off.
It can be chosen between a doorbell, barking dog, or alarm.
•
Choose your sound by pressing Modus (Select) (3)
You can adjust the volume by using the buttons / + -
•
(VOL + / VOL -) (1)/(2)
Press the An/Aus (On/Off) button activate the device. Leave the to
detection range within 10 seconds, as the alarm will get activated
otherwise. The dogs barking mode will last for about 30 seconds, the
alarm sound for about 10 seconds and the doorbell will ring once.
•
Press the (On/Off) button deactivate the alarm. TheAn/Aus to
AKTIV (Arm) indicator lamp turns off.
Disposal
a) Product: Electronic devices are recyclable waste and
must not be disposed of in the household waste. At the end
of its service life, dispose of the product in accordance with
applicable regulatory guidelines. Remove any inserted
batteries and dispose of them separately from the product.
b) Batteries: You as the end user are required by law (Battery
Ordinance) to return all used batteries. Disposing of them in
the household waste is prohibited. Used batteries can be
returned to collection points in your municipality free of
charge.
Edition English 07/2017, Version 1.1
Documentation ©2017 Cordes Vertriebsgesellschaft mbH, Germany.
All rights including translation reserved. Reproduction by any method require written approval by the
editor. This publication represents the technical status at the time of printing.
Declaration of Conformity (DOC) Cordes Vertriebsgesellschaft
mbH, Op de Solt 42, Hamburg, Germany, hereby declares 22391
that this product conforms to the 2014/53/EU directive.
The full text of the EU declaration of conformity is available at the
following internet address: www.cordes-vertrieb.de
Technical data:
Input voltage (Adapter)
12 V/DC, 1 A (adapter)
Input voltage (Battery)
8x 1,5 V AA battery
Remote control
1x 3 V CR2032
Radar detection angle
360°
Radar detection range
≤ 15m (open area)
Remote range
≤ 50 m
Standby current
consumption
Device: ≤20 mA Remote: ≤20
μA
Dynamic current
consumption
Device: ≤500 mA - 1 A
Remote: ≤15 mA
Noise level range
max. 120 dB
Operating conditions
0 bis +60 °C, 20% - 85% rF
Dimensions (W x H x T)
Weight
approx. 765 g
Radio frequency/transmitting
power
5725.32-5874.80 MHz & 433.050-
434.790MHz, 62.2dBm
Radio frequency/transmitting
power remote control
433.050-434.790MHz, 2,24dBm
Radar detection range:
1 Vol +
2 Vol -
3 Select
4 On/Off
5 Arm status LED
6 Power status LED
7 Speaker
8 Radar detector
9 Connection socket 12V/DC 1 A
10 Battery compartment
11 Signal LED
12 On/Off button
13 Select button
14 SOS button
15 Connection for hook
16 Battery compartment
1 2 3 4
+ -
Modus
An/Aus
Bellen
Alarm
Türgong
Low: 2m front / 5m rear
Med: 4m front / 8m rear
High: 6m front / 12m rear
rear
front

Produkt Specifikationer

Mærke: Cordes
Kategori: Alarmsystem
Model: CC-2200

Har du brug for hjælp?

Hvis du har brug for hjælp til Cordes CC-2200 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Alarmsystem Cordes Manualer

Cordes

Cordes CC-2200 Manual

27 December 2024
Cordes

Cordes CC-400 Manual

21 August 2024
Cordes

Cordes CC-800 Manual

21 August 2024

Alarmsystem Manualer

Nyeste Alarmsystem Manualer

Evolveo

Evolveo Alarmex Pro Manual

18 September 2025
Kemo

Kemo M062 Manual

18 September 2025
Velleman

Velleman K8093 Manual

17 September 2025
Smartwares

Smartwares FGA-13091 Manual

16 September 2025
Brandson

Brandson 304339 Manual

15 September 2025
Kidde

Kidde SM120X Manual

14 September 2025
Elektrobock

Elektrobock ELBO-073 Manual

14 September 2025
Kidde

Kidde 20SD10-CA Manual

3 September 2025
Kidde

Kidde 20SDR-CA Manual

2 September 2025
Kidde

Kidde 20SA10-CA Manual

2 September 2025