Crestron B10-BTN Manual


Læs gratis den danske manual til Crestron B10-BTN (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Crestron B10-BTN, eller vil du spørge andre brugere om produktet?

Side 1/4
Crestron B10-BTN
Button Caps for the HTT-B10X
Installation Guide
Crestron B10-BTN Button Caps for the HTT-B10X
Button Caps for the HTT-B10X:
B10-BTN
Introduction
®
B10-BTN is available in four different models. For
simplicity within this guide, B10-BTN is used except where noted.
Models
MODEL NUMBER DESCRIPTION
B10-BTNB-T 5 BLANK Blank Buttons, Black
B10-BTNB-T 5 ENGRAVED Engraved Buttons, Black
B10-BTNW-T 5 BLANK Blank Buttons, White
B10-BTNW-T 5 ENGRAVED Engraved Buttons, White
Button Installation
The HTT-B10X is shipped with 10 blank buttons (two columns of five
buttons each). To replace one or both button columns, follow this
procedure:
1. Disconnect the 12 Volt power pack (if connected) and remove the
batteries.
2. Remove the four Phillips screws from the four corners on the
bottom of the unit.
3. Remove the cover from the front of the unit.
4. Remove the old button column(s) and replace with the new one(s),
making sure the column is seated in the two small holes on the
side. No screws are required.
Installation Guide – DOC. 6641A Button Caps for the HTT-B10X: B10-BTN
1


Produkt Specifikationer

Mærke: Crestron
Kategori: Ikke kategoriseret
Model: B10-BTN

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron B10-BTN stil et spørgsmål nedenfor, og andre brugere vil svare dig