Shown in White Smooth, Custom Engraved
l
Provides control to the connected dimmer or switch using a
traveler wire in a traditional three- or four-way circuit
(CM2-DIMEX, CM2-DIMUEX, and CM2-SWEX, all sold
separately)
l
Capable of being powered by either 120VAC line voltage or
60VDC low voltage (sold separately)
l
Line based multiway control for reliability across all load
types
l
1- to 4-gang U.S. wall box installation using Cameo® 2
multi-gang faceplates (CM2-FP-G series, sold separately)
or any decorator-style faceplate
l
Robust infiNET EX® wireless communication
l
Full color RGB LED backlight and indicators for engraved
buttons
l
Backlight and indicators capable of dynamically adjusting
white between 2000K and 8000K
l
Optionally engraved and separately backlit indicators
available in two different aesthetics allowing a customized
look and user experience
l
Ambient light sensor for auto-dimming backlight with
separate day and night modes
l
Fully programmable via a Crestron control system
l
Local load control without programming when using a
rocker
l
Requires neutral wire connection
l
Crestron Home® OS compatible
l
Available in eight different color and finish options
l
RKR devices come with a large rocker button that either has
standard engraving or can be customized
l
Full keypad devices come with six buttons with default
engraving, or can be customized with up to 136 button
configurations and custom engraving
l
Individually field replaceable buttons available to
accommodate changes in device function, color, or
engravings
l
Available in four sizes:rocker, large, medium, and small
l
Blank button assemblies available for engraving by a third-
party
The CM2-KPEX Cameo® 2 keypad provides infiNET EX®
wireless network control of lighting, shading, audio, and other
amenities. Its design matches the entire line of Cameo 2
dimmers, switches, and keypads, making it a great addition to
new or retrofit installations.
l
CM2-KPEX-RKR-W-S ships in White Smooth with a
preinstalled large rocker button with default engraving.
l
CM2-KPEX-W-S ships in White Smooth with six
preinstalled buttons with default engraving.
l
CM2-KPEX-RKR ENGRAVED can be configured with a
large rocker button with custom engraving.
l
CM2-KPEX ENGRAVED can be configured with one of up
to 136 different button configurations with custom
engraving.
ENGRAVEDmodels are available in the following finishes:
o
W-S: White Smooth
o
W-T: White Textured
o
B-S: Black Smooth
o
B-T: Black Textured
o
A-S: Almond Smooth
o
A-T: Almond Textured
o
G-S: Gray Smooth
o
G-T: Gray Textured
Integrated Keypad
Full keypad models support two to six buttons, with small,
medium, and large button options. The bottom four buttons
can function as side-to-side rockers via programming. When
connected to the Crestron network, the keypad can trigger
remote actions.
NOTE: RKRmodels only accept large rocker buttons.
Button Engraving
Functions of each button can be identified with custom, laser-
etched engraving. Engraving is included with ENGRAVED
models.
When a custom engraved model is ordered, the engraved
buttons are installed on the device before it is shipped.
Engraving files must be provided when ordering and can be
created using Impress Custom Engraving Software, the
Crestron Home® Setup app, or the Crestron Home Online
Configurator. If necessary, custom engraving can be changed
CM2-KPEX
Cameo® 2 In-Wall Keypad with infiNET EX® Wireless
Communication, 100-240VAC
