Crestron CAENIB-7X1 Manual


Læs gratis den danske manual til Crestron CAENIB-7X1 (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Crestron CAENIB-7X1, eller vil du spørge andre brugere om produktet?

Side 1/6
CAENIB
Introduction
The Crestron
CAENIB Series automation enclosures are
designed to house Crestron's CLXI-Series lighting control
modules with optional load- side circuit breakers and a
PAC2 or PAC2M control system. CAENIB enclosures are
available in an assortment of sizes, suitable for surface or
engineered to provide a clean and manageable installation
with abundant provisions for wire termination and
electrical knockouts.
NOTE: The PAC2 occupies two module spaces in a
double-wide enclosure and one module space in a
single- wide.
NOTE: Four keyholes are located within the enclosure
and should be used if surface mounting.
CAENIB Overall Dimensions (Front and Side Views)
W3
W4
W1
W2
H2
W3
H1 H3
D1
W3
W5
W6
Functional Summary
Specifications
DIMENSIONS 7x2 7x1 4x2 4x1 2x1
H1
(mm (in))
1575
(62)
1575
(62)
987
(38 7/8)
987
(38 7/8)
596
(23 1/2)
H2
(mm (in))
68
(2 11/16)
68
(2 11/16)
68
(2 11/16)
53
(2 1/8)
53
(2 1/8)
H3
(mm (in))
1422
(56)
1422
(56)
835
(32 7/8)
863
(34)
473
(18 5/8)
W1
(mm (in))
673
(26 1/2)
390
(15 3/8)
673
(26 1/2)
390
(15 3/8)
390
(15 3/8)
W2
(mm (in))
647
(25 1/2)
365
(14 3/8)
647
(25 1/2)
365
(14 3/8)
365
(14 3/8)
W3
(mm (in))
63
(2 1/2)
44
(1 3/4)
63
(2 1/2)
44
(1 3/4)
44
(1 3/4)
W4
(mm (in))
520
(20 1/2)
276
(10 7/8)
520
(20 1/2)
276
(10 7/8)
276
(10 7/8)
W5
1
(mm (in))
520
(20 1/2)
250
(9 7/8)
520
(20 1/2)
250
(9 7/8)
250
(9 7/8)
W6
(mm (in))
63
(2 1/2)
69
(2 3/4)
63
(2 1/2)
69
(2 3/4)
69
(2 3/4)
D1
(mm (in))
104
(4 1/8)
104
(4 1/8)
104
(4 1/8)
104
(4 )1/8
104
(4 1/8)
Cover
Thickness
1
(1/16)
1
( )1/16
1
(1/16)
1
( )1/16
1
( )1/16
Cover Height
(mm (in))
1593
(62 3/4)
1593
(62 3/4)
1006
(39 5/8)
1006
(39 5/8)
615
(24 1/4)
Cover Width
(mm (in))
692
(27 1/4)
409
(16 1/8)
692
(27 1/4)
409
(16 )1/8
409
(16 1/8)
Included Cover
Plates
2
6 3 4 2 1
Weight (empty)
3
(kg (lb))
29.5
(65)
19.5
(43)
20
(44)
13.2
(29)
8.6
(19)
Max. Weight
(filled) (kg (lb))
90.9
(200)
45.5
(100)
45.5
(100)
22
(55)
14.1
(31)
1. The lower keyholes are not symmetrically spaced within
single- wide enclosures.
2. Additional cover plates are available from Crestron.
3. Weight (empty) is the weight of an empty enclosure with a cover.
Houses Crestron lighting modules, terminal
blocks, professional automation computer, and
third-party products with or without Crestron
u mniversal ounting p lates
Flush or surface mounted installation
Ventilated cover for convection cooling of
modules
Conveniently located electrical knockouts for
both high voltage and Class 2 wiring
16- o gauge h t dipped galvanized steel
Crestron Electronics, Inc. Installation Guide DOC. 6562A
15 Volvo Drive Rockleigh, NJ 07647 (2017317)
Tel: 888.CRESTRON 06.14
Fax: 201.767.7576 Specifications subject to
www.crestron.com change without notice.
Automation Enclosures International Versions, 230 V Crestron CAENIB
Regulatory Compliance Conformité Reglementaire
This product is Listed to applicable UL Standards Ce produit est homologué selon les normes et les
and requirements by Underwriters Laboratories Inc. exigences UL applicables par Underwriters
Laboratories Inc.
As of the date of manufacture, the CAENIB Series has been tested and found to comply with specifications
for CE marking.
Federal Communications Commission (FCC) Compliance Statement
These devices comply with part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) These devices may not cause harmful interference and (2) these devices must accept any interference
received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for
compliance could void the users authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
Industry Canada (IC) Compliance Statement Industrie Canada (IC) Décl aration de conformi
CAN ICES-3(B)/NMB 3(B)-
2
Automation Enclosures International Versions, 230 V: CAENIB Installation Guide DOC. 6562A


Produkt Specifikationer

Mærke: Crestron
Kategori: Ikke kategoriseret
Model: CAENIB-7X1

Har du brug for hjælp?

Hvis du har brug for hjælp til Crestron CAENIB-7X1 stil et spørgsmål nedenfor, og andre brugere vil svare dig