Crestron DIN-2LEDPWM8 Manual

Crestron Ikke kategoriseret DIN-2LEDPWM8

Læs gratis den danske manual til Crestron DIN-2LEDPWM8 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Crestron DIN-2LEDPWM8, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

Two independently powered and controlled 12-24VDC LED

dimming outputs

Each output controls one RGBW LED or LED strip, or four

individual LEDs or LED strips

Pulse Width Modulation (PWM) dimming technology for

flicker free dimming

100W maximum power, 5A @ 24VDC

60 W maximum power, 5A @ 12VDC

Override input

Cresnet® wired communications

Setup via front panel or software

Programmable functionality using a Crestron® Control

System

6M wide DIN rail mounting

The Crestron® DIN-2LEDPWM8 is a two-channel RGBW LED

and LED strip dimmer. It uses pulse width modulation (PWM)

frequency to provide flicker-free performance throughout the

dimming range.

Visit the Crestron page to findLighting Fixture Compatibility

out which Crestron lighting devices have been tested and are

compatible with third-party lighting fixtures.

Override

OverrideOverride Input

Input

InputInput

Override inputs are provided to allow an external contact

closure to momentarily override the control system program

and set each channel output to its override preset level. Levels

can be adjusted and saved locally from the front panel or

remotely via software.

DIN

DINDIN Rail

Rail

RailRail Installation

Installation

InstallationInstallation

The DIN-2LEDPWM8 is designed to snap onto a standard DIN

rail for installation in a wall mount enclosure. Wiring

connections are made using screw terminals positioned along

the bottom, clearly accessible from the front for easy

installation and servicing. All setup controls and indicators are

positioned on the center front panel. When installed in an

enclosure utilizing 45mm cutouts, the DIN-2LEDPWM8's

front panel stays accessible while the connections are

concealed.

Cresnet®

Cresnet®Cresnet® Wired

Wired

WiredWired Communications

Communications

CommunicationsCommunications

The DIN-2LEDPWM8 communicates with a Crestron® Control

System using the Cresnet control network. A pair of Cresnet

ports is provided on the DIN-2LEDPWM8, allowing for easy

daisy-chaining of several DIN Rail Series automation control

modules.

Specifications

SpecificationsSpecifications

Power

PowerPower

ININ 1

12 to 24VDC, 5A max (60 to 100W max)

Class 2;

Power pass-through to OUTPUT-1

OUTPUT-1

OUTPUT-1OUTPUT-1

ININ 2

12 to 24VDC, 5A max (60 to 100W max)

Class 2;

Power pass-through to OUTPUT-2

OUTPUT-2

OUTPUT-2OUTPUT-2

Load

LoadLoad Ratings

Ratings

RatingsRatings

Maximum

MaximumMaximum per

per

perper

Channel

ChannelChannel

5A max per individual RGBW output channel;

5A max per RGBW output group

Module

ModuleModule Total

Total

TotalTotal

10A max

Load

LoadLoad Types

Types

TypesTypes

12-24VDC PWMcontrolled anode RGBW or

single color LEDs and LEDstrips

Dimming

DimmingDimming

Range

RangeRange

0-100%

PWM

PWMPWM

Frequency

FrequencyFrequency

120-1200Hz;

301Hz (default)

Dimming

DimmingDimming

Curve

CurveCurve

Linear and logarithmic

Communications

CommunicationsCommunications

Cresnet

CresnetCresnet Cresnet secondary mode

Connectors

ConnectorsConnectors

NET

NETNET

(2) 4-pin 3.5mm detachable terminal blocks,

paralleled;

Cresnet® secondary port

24VDC power input

DIN-2LEDPWM8

DIN-2LEDPWM8DIN-2LEDPWM8

2 Channel RGBW LED Dimmer, DIN Rail Mount

OVERRIDE

OVERRIDEOVERRIDE

(2) 2-pin 3.5mm detachable terminal blocks,

paralleled;

Sensing input for external low-voltage

contact closure;

Activates override mode when a closure is

present;

Minimum Closure Rating: 10mA (per

module) at 24V

ININ 1

(1) set of (2) captive screw terminals;

Power input and power passthrough to

OUTPUT-1

OUTPUT-1OUTPUT-1;

Use a 12-24VDC, 5A max (60-100W max)

Class 2 power supply ( , notDIN-PWS60

included);

Ensure proper polarity;

Wire Size: 18-12AWG

ININ 2

22 (1) set of (2) captive screw terminals;

Power input and power passthrough to

OUTPUT-2

OUTPUT-2OUTPUT-2

;

Use a 12-24VDC, 5A max (60-100W max)

Class 2 power supply (

DIN-PWS60

, not

included);

Ensure proper polarity;

Wire Size: 18-12AWG

OUTPUT-1

OUTPUT-1OUTPUT-1

(1) set of (8) captive screw terminals;

R+, G+, B+, and W+ terminals are pass-

through power from ;

ININ 1

11 +

R1, G2, B3, and W4 are PWMdimming

control for the R, G, B, and W channels;

Wiring from must remain

OUTPUT-1

OUTPUT-1OUTPUT-1

separate from ;

OUTPUT-2

OUTPUT-2OUTPUT-2

Wire Size: 18-14AWG;

Maximum Wire Length: 100ft (30m)

OUTPUT-2

OUTPUT-2OUTPUT-2

(1) set of (8) captive screw terminals;

R+, G+, B+, and W+ terminals are pass-

through power from ;

ININ 2

22 +

R5, G6, B7, and W8 are PWMdimming

control for the R, G, B, and W channels;

Wiring from must remain

OUTPUT-2

OUTPUT-2OUTPUT-2

separate from ;

OUTPUT-1

OUTPUT-1OUTPUT-1

Wire Size: 18-14AWG;

Maximum Wire Length: 100ft (30m)

Controls

ControlsControls and

and

andand In

InIndicators

dicators

dicatorsdicators

SETUP

SETUPSETUP (1) Red LED and (1)recessed miniature

pushbutton;

For enabling setup mode and Touch-

Settable ID (TSID)

OVR

OVROVR (1) Red LED;

Indicates unit is in override mode

PWR

PWRPWR (1) Green LED;

Indicates DCpower is applied to the NET

NET

NETNET

port

NET

NETNET (1) Yellow LED;

Indicates communication with the control

processor

RESET

RESETRESET (1) Recessed miniature pushbutton;

Resets internal processor

OUTPUT-1

OUTPUT-1OUTPUT-1 (4) Red LEDs and (4) miniature pushbuttons,

(1) per R, G, B, W channel;

LED lights to indicate that the channel is on;

All LEDs light when in override mode

OUTPUT-2

OUTPUT-2OUTPUT-2 (4) Red LEDs and (4) miniature pushbuttons,

(1) per R, G, B, W channel;

LED lights to indicate that the channel is on;

All LEDs light when in override mode

Environmental

EnvironmentalEnvironmental

Temperature

TemperatureTemperature 32° to 104°F (0° to 40°C)

Humidity

HumidityHumidity 10% to 90% RH (noncondensing)

Heat

HeatHeat

Dissipation

DissipationDissipation

6.8BTU/hr

Construction

ConstructionConstruction

Enclosure

EnclosureEnclosure Light gray polycarbonate housing with

polycarbonate label overlay, UL94 V-0 rated

Mounting

MountingMounting 35mm DIN EN 60715 rail mount, DIN 43880

form factor for enclosures with 45mm front

panel cutout, occupies 6DINmodule spaces

(108mm)

Dimensions

DimensionsDimensions

Height

HeightHeight 3.67in. (94mm)

Width

WidthWidth 4.24in. (108mm)

Depth

DepthDepth 2.34 in. (59 mm)

Weight

WeightWeight

6.4oz (181g)

Compliance

ComplianceCompliance

Regulatory

RegulatoryRegulatory Model:

Model:

Model:Model: M201903002

M201903002

M201903002M201903002

CE, ETL Recognized Component, FCC Part 15 Class B, CAN

ICES-3 (B)/NMB-3(B)

Model

ModelModel

DIN-2LEDPWM8

DIN-2LEDPWM8DIN-2LEDPWM8

2 Channel RGBW LED Dimmer, DIN Rail Mount

Available

AvailableAvailable Accessories

Accessories

AccessoriesAccessories

For a list of available accessories, visit the DIN-2LEDPWM8

product page.

DIN-2LEDPWM8

DIN-2LEDPWM8DIN-2LEDPWM8

2 Channel RGBW LED Dimmer, DIN Rail Mount

Produkt Specifikationer

Mærke:	Crestron
Kategori:	Ikke kategoriseret
Model:	DIN-2LEDPWM8
Type:	Lysdæmper
Bredde:	108 mm
Dybde:	59 mm
Højde:	91 mm
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Driftstemperatur (T-T):	0 - 40 °C